Matching Items (4)
Filtering by
- All Subjects: FMCW
- Creators: Cochran, Douglas
- Creators: Hasan, Salman Bashir
Description
A previous study demonstrated that learning to lift an object is context-based and that in the presence of both the memory and visual cues, the acquired sensorimotor memory to manipulate an object in one context interferes with the performance of the same task in presence of visual information about a different context (Fu et al, 2012).
The purpose of this study is to know whether the primary motor cortex (M1) plays a role in the sensorimotor memory. It was hypothesized that temporary disruption of the M1 following the learning to minimize a tilt using a ‘L’ shaped object would negatively affect the retention of sensorimotor memory and thus reduce interference between the memory acquired in one context and the visual cues to perform the same task in a different context.
Significant findings were shown in blocks 1, 2, and 4. In block 3, subjects displayed insignificant amount of learning. However, it cannot be concluded that there is full interference in block 3. Therefore, looked into 3 effects in statistical analysis: the main effects of the blocks, the main effects of the trials, and the effects of the blocks and trials combined. From the block effects, there is a p-value of 0.001, and from the trial effects, the p-value is less than 0.001. Both of these effects indicate that there is learning occurring. However, when looking at the blocks * trials effects, we see a p-value of 0.002 < 0.05 indicating significant interaction between sensorimotor memories. Based on the results that were found, there is a presence of interference in all the blocks but not enough to justify the use of TMS in order to reduce interference because there is a partial reduction of interference from the control experiment. It is evident that the time delay might be the issue between context switches. By reducing the time delay between block 2 and 3 from 10 minutes to 5 minutes, I will hope to see significant learning to occur from the first trial to the second trial.
The purpose of this study is to know whether the primary motor cortex (M1) plays a role in the sensorimotor memory. It was hypothesized that temporary disruption of the M1 following the learning to minimize a tilt using a ‘L’ shaped object would negatively affect the retention of sensorimotor memory and thus reduce interference between the memory acquired in one context and the visual cues to perform the same task in a different context.
Significant findings were shown in blocks 1, 2, and 4. In block 3, subjects displayed insignificant amount of learning. However, it cannot be concluded that there is full interference in block 3. Therefore, looked into 3 effects in statistical analysis: the main effects of the blocks, the main effects of the trials, and the effects of the blocks and trials combined. From the block effects, there is a p-value of 0.001, and from the trial effects, the p-value is less than 0.001. Both of these effects indicate that there is learning occurring. However, when looking at the blocks * trials effects, we see a p-value of 0.002 < 0.05 indicating significant interaction between sensorimotor memories. Based on the results that were found, there is a presence of interference in all the blocks but not enough to justify the use of TMS in order to reduce interference because there is a partial reduction of interference from the control experiment. It is evident that the time delay might be the issue between context switches. By reducing the time delay between block 2 and 3 from 10 minutes to 5 minutes, I will hope to see significant learning to occur from the first trial to the second trial.
ContributorsHasan, Salman Bashir (Author) / Santello, Marco (Thesis director) / Kleim, Jeffrey (Committee member) / Helms Tillery, Stephen (Committee member) / Barrett, The Honors College (Contributor) / W. P. Carey School of Business (Contributor) / Harrington Bioengineering Program (Contributor)
Created2014-05
Description
This dissertation builds a clear understanding of the role of information in wireless networks, and devises adaptive strategies to optimize the overall performance. The meaning of information ranges from channel
etwork states to the structure of the signal itself. Under the common thread of characterizing the role of information, this dissertation investigates opportunistic scheduling, relaying and multicast in wireless networks. To assess the role of channel state information, the problem of opportunistic distributed opportunistic scheduling (DOS) with incomplete information is considered for ad-hoc networks in which many links contend for the same channel using random access. The objective is to maximize the system throughput. In practice, link state information is noisy, and may result in throughput degradation. Therefore, refining the state information by additional probing can improve the throughput, but at the cost of further probing. Capitalizing on optimal stopping theory, the optimal scheduling policy is shown to be threshold-based and is characterized by either one or two thresholds, depending on network settings. To understand the benefits of side information in cooperative relaying scenarios, a basic model is explored for two-hop transmissions of two information flows which interfere with each other. While the first hop is a classical interference channel, the second hop can be treated as an interference channel with transmitter side information. Various cooperative relaying strategies are developed to enhance the achievable rate. In another context, a simple sensor network is considered, where a sensor node acts as a relay, and aids fusion center in detecting an event. Two relaying schemes are considered: analog relaying and digital relaying. Sufficient conditions are provided for the optimality of analog relaying over digital relaying in this network. To illustrate the role of information about the signal structure in joint source-channel coding, multicast of compressible signals over lossy channels is studied. The focus is on the network outage from the perspective of signal distortion across all receivers. Based on extreme value theory, the network outage is characterized in terms of key parameters. A new method using subblock network coding is devised, which prioritizes resource allocation based on the signal information structure.
etwork states to the structure of the signal itself. Under the common thread of characterizing the role of information, this dissertation investigates opportunistic scheduling, relaying and multicast in wireless networks. To assess the role of channel state information, the problem of opportunistic distributed opportunistic scheduling (DOS) with incomplete information is considered for ad-hoc networks in which many links contend for the same channel using random access. The objective is to maximize the system throughput. In practice, link state information is noisy, and may result in throughput degradation. Therefore, refining the state information by additional probing can improve the throughput, but at the cost of further probing. Capitalizing on optimal stopping theory, the optimal scheduling policy is shown to be threshold-based and is characterized by either one or two thresholds, depending on network settings. To understand the benefits of side information in cooperative relaying scenarios, a basic model is explored for two-hop transmissions of two information flows which interfere with each other. While the first hop is a classical interference channel, the second hop can be treated as an interference channel with transmitter side information. Various cooperative relaying strategies are developed to enhance the achievable rate. In another context, a simple sensor network is considered, where a sensor node acts as a relay, and aids fusion center in detecting an event. Two relaying schemes are considered: analog relaying and digital relaying. Sufficient conditions are provided for the optimality of analog relaying over digital relaying in this network. To illustrate the role of information about the signal structure in joint source-channel coding, multicast of compressible signals over lossy channels is studied. The focus is on the network outage from the perspective of signal distortion across all receivers. Based on extreme value theory, the network outage is characterized in terms of key parameters. A new method using subblock network coding is devised, which prioritizes resource allocation based on the signal information structure.
ContributorsPaataguppe Suryanarayan Bhat, Chandrashekhar Thejaswi (Author) / Zhang, Junshan (Thesis advisor) / Cochran, Douglas (Committee member) / Duman, Tolga (Committee member) / Hui, Yu (Committee member) / Taylor, Thomas (Committee member) / Arizona State University (Publisher)
Created2011
Description
The use of conventional weather radar in vulcanology leads to two problems: the radars often use wavelengths which are too long to detect the fine ash particles, and they cannot be field–adjusted to fit the wide variety of eruptions. Thus, to better study these geologic processes, a new radar must be developed that is easily reconfigurable to allow for flexibility and can operate at sufficiently short wavelengths.
This thesis investigates how to design a radar using a field–programmable gate array board to generate the radar signal, and process the returned signal to determine the distance and concentration of objects (in this case, ash). The purpose of using such a board lies in its reconfigurability—a design can (relatively easily) be adjusted, recompiled, and reuploaded to the hardware with none of the cost or time overhead required of a standard weather radar.
The design operates on the principle of frequency–modulated continuous–waves, in which the output signal frequency changes as a function of time. The difference in transmit and echo frequencies determines the distance of an object, while the magnitude of a particular difference frequency corresponds to concentration. Thus, by viewing a spectrum of frequency differences, one is able to see both the concentration and distances of ash from the radar.
The transmit signal data was created in MATLAB®, while the radar was designed with MATLAB® Simulink® using hardware IP blocks and implemented on the ROACH2 signal processing hardware, which utilizes a Xilinx® Virtex®–6 chip. The output is read from a computer linked to the hardware through Ethernet, using a Python™ script. Testing revealed minor flaws due to the usage of lower–grade components in the prototype. However, the functionality of the proposed radar design was proven, making this approach to radar a promising path for modern vulcanology.
This thesis investigates how to design a radar using a field–programmable gate array board to generate the radar signal, and process the returned signal to determine the distance and concentration of objects (in this case, ash). The purpose of using such a board lies in its reconfigurability—a design can (relatively easily) be adjusted, recompiled, and reuploaded to the hardware with none of the cost or time overhead required of a standard weather radar.
The design operates on the principle of frequency–modulated continuous–waves, in which the output signal frequency changes as a function of time. The difference in transmit and echo frequencies determines the distance of an object, while the magnitude of a particular difference frequency corresponds to concentration. Thus, by viewing a spectrum of frequency differences, one is able to see both the concentration and distances of ash from the radar.
The transmit signal data was created in MATLAB®, while the radar was designed with MATLAB® Simulink® using hardware IP blocks and implemented on the ROACH2 signal processing hardware, which utilizes a Xilinx® Virtex®–6 chip. The output is read from a computer linked to the hardware through Ethernet, using a Python™ script. Testing revealed minor flaws due to the usage of lower–grade components in the prototype. However, the functionality of the proposed radar design was proven, making this approach to radar a promising path for modern vulcanology.
ContributorsLee, Byeong Mok (Co-author) / Xi, Andrew Jinchi (Co-author) / Groppi, Christopher (Thesis director) / Mauskopf, Philip (Committee member) / Baumann, Alicia (Committee member) / Cochran, Douglas (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The use of conventional weather radar in vulcanology leads to two problems: the radars often use wavelengths which are too long to detect the fine ash particles, and they cannot be field–adjusted to fit the wide variety of eruptions. Thus, to better study these geologic processes, a new radar must be developed that is easily reconfigurable to allow for flexibility and can operate at sufficiently short wavelengths.
This thesis investigates how to design a radar using a field–programmable gate array board to generate the radar signal, and process the returned signal to determine the distance and concentration of objects (in this case, ash). The purpose of using such a board lies in its reconfigurability—a design can (relatively easily) be adjusted, recompiled, and reuploaded to the hardware with none of the cost or time overhead required of a standard weather radar.
The design operates on the principle of frequency–modulated continuous–waves, in which the output signal frequency changes as a function of time. The difference in transmit and echo frequencies determines the distance of an object, while the magnitude of a particular difference frequency corresponds to concentration. Thus, by viewing a spectrum of frequency differences, one is able to see both the concentration and distances of ash from the radar.
The transmit signal data was created in MATLAB®, while the radar was designed with MATLAB® Simulink® using hardware IP blocks and implemented on the ROACH2 signal processing hardware, which utilizes a Xilinx® Virtex®–6 chip. The output is read from a computer linked to the hardware through Ethernet, using a Python™ script. Testing revealed minor flaws due to the usage of lower–grade components in the prototype. However, the functionality of the proposed radar design was proven, making this approach to radar a promising path for modern vulcanology.
This thesis investigates how to design a radar using a field–programmable gate array board to generate the radar signal, and process the returned signal to determine the distance and concentration of objects (in this case, ash). The purpose of using such a board lies in its reconfigurability—a design can (relatively easily) be adjusted, recompiled, and reuploaded to the hardware with none of the cost or time overhead required of a standard weather radar.
The design operates on the principle of frequency–modulated continuous–waves, in which the output signal frequency changes as a function of time. The difference in transmit and echo frequencies determines the distance of an object, while the magnitude of a particular difference frequency corresponds to concentration. Thus, by viewing a spectrum of frequency differences, one is able to see both the concentration and distances of ash from the radar.
The transmit signal data was created in MATLAB®, while the radar was designed with MATLAB® Simulink® using hardware IP blocks and implemented on the ROACH2 signal processing hardware, which utilizes a Xilinx® Virtex®–6 chip. The output is read from a computer linked to the hardware through Ethernet, using a Python™ script. Testing revealed minor flaws due to the usage of lower–grade components in the prototype. However, the functionality of the proposed radar design was proven, making this approach to radar a promising path for modern vulcanology.
ContributorsXi, Andrew Jinchi (Co-author) / Lee, Matthew Byeongmok (Co-author) / Groppi, Christopher (Thesis director) / Mauskopf, Philip (Committee member) / Cochran, Douglas (Committee member) / Baumann, Alicia (Committee member) / Electrical Engineering Program (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05