Matching Items (5)
Filtering by
- All Subjects: Operations Research
- All Subjects: Screening Designs
- Creators: Montgomery, Douglas C.
Description
Nonregular screening designs can be an economical alternative to traditional resolution IV 2^(k-p) fractional factorials. Recently 16-run nonregular designs, referred to as no-confounding designs, were introduced in the literature. These designs have the property that no pair of main effect (ME) and two-factor interaction (2FI) estimates are completely confounded. In this dissertation, orthogonal arrays were evaluated with many popular design-ranking criteria in order to identify optimal 20-run and 24-run no-confounding designs. Monte Carlo simulation was used to empirically assess the model fitting effectiveness of the recommended no-confounding designs. The results of the simulation demonstrated that these new designs, particularly the 24-run designs, are successful at detecting active effects over 95% of the time given sufficient model effect sparsity. The final chapter presents a screening design selection methodology, based on decision trees, to aid in the selection of a screening design from a list of published options. The methodology determines which of a candidate set of screening designs has the lowest expected experimental cost.
ContributorsStone, Brian (Author) / Montgomery, Douglas C. (Thesis advisor) / Silvestrini, Rachel T. (Committee member) / Fowler, John W (Committee member) / Borror, Connie M. (Committee member) / Arizona State University (Publisher)
Created2013
Description
No-confounding designs (NC) in 16 runs for 6, 7, and 8 factors are non-regular fractional factorial designs that have been suggested as attractive alternatives to the regular minimum aberration resolution IV designs because they do not completely confound any two-factor interactions with each other. These designs allow for potential estimation of main effects and a few two-factor interactions without the need for follow-up experimentation. Analysis methods for non-regular designs is an area of ongoing research, because standard variable selection techniques such as stepwise regression may not always be the best approach. The current work investigates the use of the Dantzig selector for analyzing no-confounding designs. Through a series of examples it shows that this technique is very effective for identifying the set of active factors in no-confounding designs when there are three of four active main effects and up to two active two-factor interactions.
To evaluate the performance of Dantzig selector, a simulation study was conducted and the results based on the percentage of type II errors are analyzed. Also, another alternative for 6 factor NC design, called the Alternate No-confounding design in six factors is introduced in this study. The performance of this Alternate NC design in 6 factors is then evaluated by using Dantzig selector as an analysis method. Lastly, a section is dedicated to comparing the performance of NC-6 and Alternate NC-6 designs.
To evaluate the performance of Dantzig selector, a simulation study was conducted and the results based on the percentage of type II errors are analyzed. Also, another alternative for 6 factor NC design, called the Alternate No-confounding design in six factors is introduced in this study. The performance of this Alternate NC design in 6 factors is then evaluated by using Dantzig selector as an analysis method. Lastly, a section is dedicated to comparing the performance of NC-6 and Alternate NC-6 designs.
ContributorsKrishnamoorthy, Archana (Author) / Montgomery, Douglas C. (Thesis advisor) / Borror, Connie (Thesis advisor) / Pan, Rong (Committee member) / Arizona State University (Publisher)
Created2014
Description
Mostly, manufacturing tolerance charts are used these days for manufacturing tolerance transfer but these have the limitation of being one dimensional only. Some research has been undertaken for the three dimensional geometric tolerances but it is too theoretical and yet to be ready for operator level usage. In this research, a new three dimensional model for tolerance transfer in manufacturing process planning is presented that is user friendly in the sense that it is built upon the Coordinate Measuring Machine (CMM) readings that are readily available in any decent manufacturing facility. This model can take care of datum reference change between non orthogonal datums (squeezed datums), non-linearly oriented datums (twisted datums) etc. Graph theoretic approach based upon ACIS, C++ and MFC is laid out to facilitate its implementation for automation of the model. A totally new approach to determining dimensions and tolerances for the manufacturing process plan is also presented. Secondly, a new statistical model for the statistical tolerance analysis based upon joint probability distribution of the trivariate normal distributed variables is presented. 4-D probability Maps have been developed in which the probability value of a point in space is represented by the size of the marker and the associated color. Points inside the part map represent the pass percentage for parts manufactured. The effect of refinement with form and orientation tolerance is highlighted by calculating the change in pass percentage with the pass percentage for size tolerance only. Delaunay triangulation and ray tracing algorithms have been used to automate the process of identifying the points inside and outside the part map. Proof of concept software has been implemented to demonstrate this model and to determine pass percentages for various cases. The model is further extended to assemblies by employing convolution algorithms on two trivariate statistical distributions to arrive at the statistical distribution of the assembly. Map generated by using Minkowski Sum techniques on the individual part maps is superimposed on the probability point cloud resulting from convolution. Delaunay triangulation and ray tracing algorithms are employed to determine the assembleability percentages for the assembly.
ContributorsKhan, M Nadeem Shafi (Author) / Phelan, Patrick E (Thesis advisor) / Montgomery, Douglas C. (Committee member) / Farin, Gerald (Committee member) / Roberts, Chell (Committee member) / Henderson, Mark (Committee member) / Arizona State University (Publisher)
Created2011
Description
Functional or dynamic responses are prevalent in experiments in the fields of engineering, medicine, and the sciences, but proposals for optimal designs are still sparse for this type of response. Experiments with dynamic responses result in multiple responses taken over a spectrum variable, so the design matrix for a dynamic response have more complicated structures. In the literature, the optimal design problem for some functional responses has been solved using genetic algorithm (GA) and approximate design methods. The goal of this dissertation is to develop fast computer algorithms for calculating exact D-optimal designs.
First, we demonstrated how the traditional exchange methods could be improved to generate a computationally efficient algorithm for finding G-optimal designs. The proposed two-stage algorithm, which is called the cCEA, uses a clustering-based approach to restrict the set of possible candidates for PEA, and then improves the G-efficiency using CEA.
The second major contribution of this dissertation is the development of fast algorithms for constructing D-optimal designs that determine the optimal sequence of stimuli in fMRI studies. The update formula for the determinant of the information matrix was improved by exploiting the sparseness of the information matrix, leading to faster computation times. The proposed algorithm outperforms genetic algorithm with respect to computational efficiency and D-efficiency.
The third contribution is a study of optimal experimental designs for more general functional response models. First, the B-spline system is proposed to be used as the non-parametric smoother of response function and an algorithm is developed to determine D-optimal sampling points of a spectrum variable. Second, we proposed a two-step algorithm for finding the optimal design for both sampling points and experimental settings. In the first step, the matrix of experimental settings is held fixed while the algorithm optimizes the determinant of the information matrix for a mixed effects model to find the optimal sampling times. In the second step, the optimal sampling times obtained from the first step is held fixed while the algorithm iterates on the information matrix to find the optimal experimental settings. The designs constructed by this approach yield superior performance over other designs found in literature.
First, we demonstrated how the traditional exchange methods could be improved to generate a computationally efficient algorithm for finding G-optimal designs. The proposed two-stage algorithm, which is called the cCEA, uses a clustering-based approach to restrict the set of possible candidates for PEA, and then improves the G-efficiency using CEA.
The second major contribution of this dissertation is the development of fast algorithms for constructing D-optimal designs that determine the optimal sequence of stimuli in fMRI studies. The update formula for the determinant of the information matrix was improved by exploiting the sparseness of the information matrix, leading to faster computation times. The proposed algorithm outperforms genetic algorithm with respect to computational efficiency and D-efficiency.
The third contribution is a study of optimal experimental designs for more general functional response models. First, the B-spline system is proposed to be used as the non-parametric smoother of response function and an algorithm is developed to determine D-optimal sampling points of a spectrum variable. Second, we proposed a two-step algorithm for finding the optimal design for both sampling points and experimental settings. In the first step, the matrix of experimental settings is held fixed while the algorithm optimizes the determinant of the information matrix for a mixed effects model to find the optimal sampling times. In the second step, the optimal sampling times obtained from the first step is held fixed while the algorithm iterates on the information matrix to find the optimal experimental settings. The designs constructed by this approach yield superior performance over other designs found in literature.
ContributorsSaleh, Moein (Author) / Pan, Rong (Thesis advisor) / Montgomery, Douglas C. (Committee member) / Runger, George C. (Committee member) / Kao, Ming-Hung (Committee member) / Arizona State University (Publisher)
Created2015
Description
Revenue management is at the core of airline operations today; proprietary algorithms and heuristics are used to determine prices and availability of tickets on an almost-continuous basis. While initial developments in revenue management were motivated by industry practice, later developments overcoming fundamental omissions from earlier models show significant improvement, despite their focus on relatively esoteric aspects of the problem, and have limited potential for practical use due to computational requirements. This dissertation attempts to address various modeling and computational issues, introducing realistic choice-based demand revenue management models. In particular, this work introduces two optimization formulations alongside a choice-based demand modeling framework, improving on the methods that choice-based revenue management literature has created to date, by providing sensible models for airline implementation.
The first model offers an alternative formulation to the traditional choice-based revenue management problem presented in the literature, and provides substantial gains in expected revenue while limiting the problem’s computational complexity. Making assumptions on passenger demand, the Choice-based Mixed Integer Program (CMIP) provides a significantly more compact formulation when compared to other choice-based revenue management models, and consistently outperforms previous models.
Despite the prevalence of choice-based revenue management models in literature, the assumptions made on purchasing behavior inhibit researchers to create models that properly reflect passenger sensitivities to various ticket attributes, such as price, number of stops, and flexibility options. This dissertation introduces a general framework for airline choice-based demand modeling that takes into account various ticket attributes in addition to price, providing a framework for revenue management models to relate airline companies’ product design strategies to the practice of revenue management through decisions on ticket availability and price.
Finally, this dissertation introduces a mixed integer non-linear programming formulation for airline revenue management that accommodates the possibility of simultaneously setting prices and availabilities on a network. Traditional revenue management models primarily focus on availability, only, forcing secondary models to optimize prices. The Price-dynamic Choice-based Mixed Integer Program (PCMIP) eliminates this two-step process, aligning passenger purchase behavior with revenue management policies, and is shown to outperform previously developed models, providing a new frontier of research in airline revenue management.
The first model offers an alternative formulation to the traditional choice-based revenue management problem presented in the literature, and provides substantial gains in expected revenue while limiting the problem’s computational complexity. Making assumptions on passenger demand, the Choice-based Mixed Integer Program (CMIP) provides a significantly more compact formulation when compared to other choice-based revenue management models, and consistently outperforms previous models.
Despite the prevalence of choice-based revenue management models in literature, the assumptions made on purchasing behavior inhibit researchers to create models that properly reflect passenger sensitivities to various ticket attributes, such as price, number of stops, and flexibility options. This dissertation introduces a general framework for airline choice-based demand modeling that takes into account various ticket attributes in addition to price, providing a framework for revenue management models to relate airline companies’ product design strategies to the practice of revenue management through decisions on ticket availability and price.
Finally, this dissertation introduces a mixed integer non-linear programming formulation for airline revenue management that accommodates the possibility of simultaneously setting prices and availabilities on a network. Traditional revenue management models primarily focus on availability, only, forcing secondary models to optimize prices. The Price-dynamic Choice-based Mixed Integer Program (PCMIP) eliminates this two-step process, aligning passenger purchase behavior with revenue management policies, and is shown to outperform previously developed models, providing a new frontier of research in airline revenue management.
ContributorsClough, Michael C (Author) / Gel, Esma (Thesis advisor) / Jacobs, Timothy (Thesis advisor) / Askin, Ronald (Committee member) / Montgomery, Douglas C. (Committee member) / Arizona State University (Publisher)
Created2016