Matching Items (5)
Filtering by
- All Subjects: Catalysis
- All Subjects: Frequency Selective Surfaces
- All Subjects: expression
- Creators: Jones, Anne
- Member of: Barrett, The Honors College Thesis/Creative Project Collection
Description
The addition of aminoalkyl-substituted α-diimine (DI) ligands to bis(1,5 cyclooctadiene) nickel (or (COD)2Ni) resulted in the formation of two new nickel complexes with the general formula of (Me2NPrDI)2Ni and (PyEtDI)2Ni. Investigation of these complexes by 1H NMR spectroscopy revealed diimine coordination but also the absence of amine arm coordination. Using the 1H NMR spectra in conjunction with structures determined through single crystal X-ray diffraction, the electronic structure of both complexes was described as having a Ni(II) metal center that is antiferromagnetically coupled to 2 DI radical monoanions. A greater ligand field was sought by replacing the pendant amines with phosphine groups on the DI ligands. This yielded ligands with the general formula (Ph2PPrDI) and (Ph2PEtDI). Upon addition to (COD)2Ni, each ligand immediately displaced both COD ligands from the Ni0 center to produce new κ4 N,N,P,P complexes, (Ph2PPrDI)Ni and (Ph2PEtDI)Ni, as observed via single crystal X-ray diffraction and NMR spectroscopy. Reduction of the DI backbone was observed in both complexes, with both complexes being described as having a Ni(I) metal center that is antiferromagnetically coupled to a DI radical monoanion. In addition to alkylphosphine substituted DI ligands, the coordination of a pyridine diimine (PDI) ligand featuring pendant alkylphosphines was also investigated. The addition of (Ph2PPrPDI) to (COD)2Ni produced a new paramagnetic (μeff = 1.21 μB), κ4-N,N,N,P complex identified as (Ph2PPrPDI)Ni. Reduction of the PDI chelate was observed through single crystal X-ray diffraction with the electronic structure described as having a low-spin Ni(I) metal center that is weakly coupled to a PDI radical monoanion (SNi = 1/2). The ability of the three Ni complexes to mediate the hydrosilylation of several unsaturated organic substrates was subsequently investigated. Using a range of catalyst loadings, the hydrosilylation of various substituted ketones afforded a mixture of both the mono- and di-hydrosilylated products within 24 hours, while the hydrosilylation of various substituted aldehydes afforded the mono-hydrosilylated product almost exclusively within hours. (Ph2PEtDI)Ni and (Ph2PPrPDI)Ni were identified as the most effective catalysts for the hydrosilylation of aldehydes at ambient temperature using catalyst loadings of 1 mol%.
ContributorsPorter, Tyler Mathew (Author) / Trovitch, Ryan (Thesis director) / Jones, Anne (Committee member) / Mujica, Vladimiro (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor)
Created2014-05
Description
Heliobacterium modesticaldum (H. modesticaldum) is an anaerobic photoheterotroph that can produce molecular hydrogen (H2) when it is fixing dinitrogen (N2). In addition, electrons can be injected into this organism via an electrode and redox mediator in a light-dependent fashion, as shown recently by the Redding and Jones research groups. These factors make H. modesticaldum an ideal organism for use in a microbial photoelectrosynthesis cell, in which electricity can be used to power specific metabolic processes that produce a desired compound (e.g. H2). However, the injection of electrons into this organism is not optimal, which may limit the H2 production rate. There is a gene (HM1_0653) in the genome encoding a multi-heme cytochrome c that is similar to the proteins known to be used for exit of electrons in the well- known electrode-respiring bacteria (e.g. Geobacteria). RNA-sequencing in the Redding lab has shown that the HM1_0653 gene is very poorly expressed in H. modesticaldum. Boosting expression of this cytochrome could lead to faster electron transfer into the cells and thereby more H2 production via photoelectrosynthesis. In order to gain a deeper understanding of this protein, it was expressed in E.coli by two different versions: (1) the entire gene and (2) a truncated gene with an additional hexahistidine tag (truncHM1_0653). Both cultures had a pink color, indicating the biosynthesis of cytochrome. It was discovered that the HM1_0653 protein was likely released into the medium and shows the most promise for ease of purification of HM1_0653. Furthermore, we explored protein expression in H. modesticaldum using the current transformation system in the Redding Lab, but the combination of gene toxicity and copy number of the vector resulted in cloning difficulties in E.coli. An alternative vector may prove more successful.
ContributorsHerrera-Theut, Kathryn Ann (Author) / Redding, Kevin (Thesis director) / Jones, Anne (Committee member) / Torres, Cesar (Committee member) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Industrial interest in electrocatalytic production of hydrogen has stimulated considerable research in understanding hydrogenases, the biological catalysts for proton reduction, and related synthetic mimics. Structurally closely related complexes are often synthesized to define structure-function relationships and optimize catalysis. However, this process can also lead to drastic and unpredictable changes in the catalytic behavior. In this paper, we use density functional theory calculations to identify changes in the electronic structure of [Ni(bdt)(dppf)] (bdt = 1,2-benzenedithiolate, dppf = 1,1ʹ-bis(diphenylphosphino)ferrocene) relative to [Ni(tdt)(dppf)] (tdt = toluene-3,4-dithiol) as a means to explain the substantially reduced electrocatalytic activity of the tdt complex. An increased likelihood of protonation at the sulfur sites of the tdt complex relative to the Ni is revealed. This decreased propensity of metal protonation may lead to less efficient metal-hydride production and subsequently catalysis.
ContributorsHerringer, Nicholas Stephen (Author) / Jones, Anne (Thesis director) / Mujica, Vladimiro (Committee member) / Pilarisetty, Tarakeshwar (Committee member) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The honors thesis presented in this document describes an extension to an electrical engineering capstone project whose scope is to develop the receiver electronics for an RF interrogator. The RF interrogator functions by detecting the change in resonant frequency of (i.e, frequency of maximum backscatter from) a target resulting from an environmental input. The general idea of this honors project was to design three frequency selective surfaces that would act as surrogate backscattering or reflecting targets that each contains a distinct frequency response. Using 3-D electromagnetic simulation software, three surrogate targets exhibiting bandpass frequency responses at distinct frequencies were designed and presented in this thesis.
ContributorsSisk, Ryan Derek (Author) / Aberle, James (Thesis director) / Chakraborty, Partha (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
The ability of magnetic resonance imaging (MRI) to image any part of the human body without the effects of harmful radiation such as in CAT and PET scans established MRI as a clinical mainstay for a variety of different ailments and maladies. Short wavelengths accompany the high frequencies present in high-field MRI, and are on the same scale as the human body at a static magnetic field strength of 3 T (128 MHz). As a result of these shorter wavelengths, standing wave effects are produced in the MR bore where the patient is located. These standing waves generate bright and dark spots in the resulting MR image, which correspond to irregular regions of high and low clarity. Coil loading is also an inevitable byproduct of subject positioning inside the bore, which decreases the signal that the region of interest (ROI) receives for the same input power. Several remedies have been proposed in the literature to remedy the standing wave effect, including the placement of high permittivity dielectric pads (HPDPs) near the ROI. Despite the success of HPDPs at smoothing out image brightness, these pads are traditionally bulky and take up a large spatial volume inside the already small MR bore. In recent years, artificial periodic structures known as metamaterials have been designed to exhibit specific electromagnetic effects when placed inside the bore. Although typically thinner than HPDPs, many metamaterials in the literature are rigid and cannot conform to the shape of the patient, and some are still too bulky for practical use in clinical settings. The well-known antenna engineering concept of fractalization, or the introduction of self-similar patterns, may be introduced to the metamaterial to display a specific resonance curve as well as increase the metamaterial’s intrinsic capacitance. Proposed in this paper is a flexible fractal-inspired metamaterial for application in 3 T MR head imaging. To demonstrate the advantages of this flexibility, two different metamaterial configurations are compared to determine which produces a higher localized signal-to-noise ratio (SNR) and average signal measured in the image: in the first configuration, the metamaterial is kept rigid underneath a human head phantom to represent metamaterials in the literature (single-sided placement); and in the second, the metamaterial is wrapped around the phantom to utilize its flexibility (double-sided placement). The double-sided metamaterial setup was found to produce an increase in normalized SNR of over 5% increase in five of six chosen ROIs when compared to no metamaterial use and showed a 10.14% increase in the total average signal compared to the single-sided configuration.
ContributorsSokol, Samantha (Author) / Sohn, Sung-Min (Thesis director) / Allee, David (Committee member) / Jones, Anne (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2022-05