Matching Items (507)
Filtering by

Clear all filters

149689-Thumbnail Image.png
Description
Ordered mesoporous materials have tunable pore sizes between 2 and 50 nm and are characterized by ordered pore structures and high surface areas (~1000 m2/g). This makes them particularly favorable for a number of membrane applications such as protein separation, polymer extrusion, nanowire fabrication and membrane reactors. These membranes can

Ordered mesoporous materials have tunable pore sizes between 2 and 50 nm and are characterized by ordered pore structures and high surface areas (~1000 m2/g). This makes them particularly favorable for a number of membrane applications such as protein separation, polymer extrusion, nanowire fabrication and membrane reactors. These membranes can be fabricated as top-layers on macroporous supports or as embedded membranes in a dense matrix. The first part of the work deals with the hydrothermal synthesis and water-vapor/oxygen separation properties of supported MCM-48 and a new Al-MCM-48 type membrane for potential use in air conditioning systems. Knudsen-type permeation is observed in these membranes. The combined effect of capillary condensation and the aluminosilicate matrix resulted in the highest separation factor (142) in Al-MCM-48 membranes, with a water vapor permeance of 6×10-8mol/m2Pas. The second part focuses on synthesis of embedded mesoporous silica membranes with helically ordered pores by a novel Counter Diffusion Self-Assembly (CDSA) method. This method is an extension of the interfacial synthesis method for fiber synthesis using tetrabutylorthosilicate (TBOS) and cetyltrimethylammonium bromide (CTAB) as the silica source and surfactant respectively. The initial part of this study determined the effect of TBOS height and humidity on fiber formation. From this study, the range of TBOS heights for best microscopic and macroscopic ordering were established. Next, the CDSA method was used to successfully synthesize membranes, which were characterized to have good support plugging and an ordered pore structure. Factors that influence membrane synthesis and plug microstructure were determined. SEM studies revealed the presence of gaps between the plugs and support pores, which occur due to shrinking of the plug on drying. Development of a novel liquid deposition method to seal these defects constituted the last part of this work. Post sealing, excess silica was removed by etching with hydrofluoric acid. Membrane quality was evaluated at each step using SEM and gas permeation measurements. After surfactant removal by liquid extraction, the membranes exhibited an O2 permeance of 1.65x10-6mol/m2.Pa.s and He/O2 selectivity of 3.30. The successful synthesis of this membrane is an exciting new development in the area of ordered mesoporous membrane technology.
ContributorsSeshadri, Shriya (Author) / Lin, Jerry Y. S. (Thesis advisor) / Dai, Lenore (Committee member) / Rege, Kaushal (Committee member) / Smith, David J. (Committee member) / Vogt, Bryan (Committee member) / Arizona State University (Publisher)
Created2011
149739-Thumbnail Image.png
Description
III-nitride alloys are wide band gap semiconductors with a broad range of applications in optoelectronic devices such as light emitting diodes and laser diodes. Indium gallium nitride light emitting diodes have been successfully produced over the past decade. But the progress of green emission light emitting devices has been limited

III-nitride alloys are wide band gap semiconductors with a broad range of applications in optoelectronic devices such as light emitting diodes and laser diodes. Indium gallium nitride light emitting diodes have been successfully produced over the past decade. But the progress of green emission light emitting devices has been limited by the incorporation of indium in the alloy, mainly due to phase separation. This difficulty could be addressed by studying the growth and thermodynamics of these alloys. Knowledge of thermodynamic phase stabilities and of pressure - temperature - composition phase diagrams is important for an understanding of the boundary conditions of a variety of growth techniques. In this dissertation a study of the phase separation of indium gallium nitride is conducted using a regular solution model of the ternary alloy system. Graphs of Gibbs free energy of mixing were produced for a range of temperatures. Binodal and spinodal decomposition curves show the stable and unstable regions of the alloy in equilibrium. The growth of gallium nitride and indium gallium nitride was attempted by the reaction of molten gallium - indium alloy with ammonia at atmospheric pressure. Characterization by X-ray diffraction, photoluminescence, and secondary electron microscopy show that the samples produced by this method contain only gallium nitride in the hexagonal phase. The instability of indium nitride at the temperatures required for activation of ammonia accounts for these results. The photoluminescence spectra show a correlation between the intensity of a broad green emission, related to native defects, and indium composition used in the molten alloy. A different growth method was used to grow two columnar-structured gallium nitride films using ammonium chloride and gallium as reactants and nitrogen and ammonia as carrier gasses. Investigation by X-ray diffraction and spatially-resolved cathodoluminescence shows the film grown at higher temperature to be primarily hexagonal with small quantities of cubic crystallites, while the one grown at lower temperature to be pure hexagonal. This was also confirmed by low temperature photoluminescence measurements. The results presented here show that cubic and hexagonal crystallites can coexist, with the cubic phase having a much sharper and stronger luminescence. Controlled growth of the cubic phase GaN crystallites can be of use for high efficiency light detecting and emitting devices. The ammonolysis of a precursor was used to grow InGaN powders with different indium composition. High purity hexagonal GaN and InN were obtained. XRD spectra showed complete phase separation for samples with x < 30%, with ~ 9% indium incorporation in the 30% sample. The presence of InGaN in this sample was confirmed by PL measurements, where luminescence from both GaN and InGaN band edge are observed. The growth of higher indium compositions samples proved to be difficult, with only the presence of InN in the sample. Nonetheless, by controlling parameters like temperature and time may lead to successful growth of this III-nitride alloy by this method.
ContributorsHill, Arlinda (Author) / Ponce, Fernando A. (Thesis advisor) / Chamberlin, Ralph V (Committee member) / Sankey, Otto F (Committee member) / Smith, David J. (Committee member) / Tsen, Kong-Thon (Committee member) / Arizona State University (Publisher)
Created2011
Description

Soiled: An Environmental Podcast is a six episode series that addresses common environmental topics and debunks myths that surround those topics.

ContributorsTurner, Natalie Ann (Co-author) / Kuta, Tiffany (Co-author) / Jones, Cassity (Co-author) / Boyer, Mackenzie (Thesis director) / Ward, Kristen (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147998-Thumbnail Image.png
Description

For this Creative Project, I decided to explore the elements that set novellas apart from other genres and then experiment writing in the form. In doing so, I took into account three main categories: Plot Structure, Character Development, Style/Format, and then used my findings to write 45 pages of a

For this Creative Project, I decided to explore the elements that set novellas apart from other genres and then experiment writing in the form. In doing so, I took into account three main categories: Plot Structure, Character Development, Style/Format, and then used my findings to write 45 pages of a novella titled Emmy and Me.

ContributorsBingham, Roxanne Marie (Author) / Irish, Jennifer (Thesis director) / Danielson, Jonathan (Committee member) / Department of English (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description

Filmmakers seek to create story pieces that are visually beautiful and engage the full attention of their audience. They typically abide by a 3-step process moving through pre-production, production, and post-production. Within each step, there are a series of tasks that need to be accomplished in order to reach the

Filmmakers seek to create story pieces that are visually beautiful and engage the full attention of their audience. They typically abide by a 3-step process moving through pre-production, production, and post-production. Within each step, there are a series of tasks that need to be accomplished in order to reach the completed film. A successful film requires careful planning and strategy in pre-production, timely and decisive execution in production, and minimal unforeseen retouching in post-production.<br/><br/>Even though filmmakers have continued to follow the same formula throughout the decades, the filmmaking process has remained largely inefficient. It is extremely common for pre-production planning to be undercut, for production filming to run far too long, and for post-production VFX and editing to send the project over budget. These instances can cause major issues as the project is being finalized. In many scenarios portions of the project need to be reshot, the box office revenue isn’t enough to make up for extensive VFX retouching, or the project may never even come to fruition. <br/><br/>The reason for this recurring theme of films being over budget and out of time is quite simply that technology has made filmmakers lazy. “Fix it in post” is a disgustingly common phrase used in the film industry. It describes the utter abuse of computer retouching in the post-production phase of filmmaking. Despite working in an industry that seeks to entertain the human eye, filmmakers have become blind to all of the small mistakes that could cost them hundreds of hours and millions of dollars in the long run.

ContributorsKlewicki, Tallee Jo (Author) / Shin, Dosun (Thesis director) / Eliciana, Nascimento (Committee member) / The Design School (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147924-Thumbnail Image.png
Description

My project is designed to provide art education to incarcerated youth in Arizona. This project will address two current issues in Arizona; the underfunding of art programs and high rates of incarceration. As of 2021, there are no state-funded art programs in Arizona. Arizona is tied with Texas for the

My project is designed to provide art education to incarcerated youth in Arizona. This project will address two current issues in Arizona; the underfunding of art programs and high rates of incarceration. As of 2021, there are no state-funded art programs in Arizona. Arizona is tied with Texas for the eighth highest rate of incarceration in the country. In Arizona, 750 out of every 100,000 people are incarcerated. This project is an art course for incarcerated youth. The project includes a packet detailing the course content and assignment details, a class syllabus, a course flyer, and a certificate of completion. The course is intended to be taught at the Adobe Mountain School facility. The course is designed so that it can be implemented in other facilities in the future. The class will be taught by volunteers with a background in studio art, design, or art education. Each student will receive a course packet that they can use to keep track of information and assignments. Instructors will use the course packet to teach the class. The course focuses on drawing with charcoal and oil pastel, which will build a foundation in drawing skills. The course covers a twelve-week semester. The course content packet includes a week-by-week breakdown of the teaching material and project descriptions. The course consists of two main projects and preparatory work. The preparatory work includes vocabulary terms, art concepts, drawing guides, brainstorming activities, and drawing activities. The two main prompts are designed for students to explore the materials and to encourage self-reflection. The class is curated so that students can create art in a low-risk, non-judgemental environment. The course will also focus on establishing problem-solving and critical thinking skills through engaging activities.

ContributorsSheppard, Eve (Author) / Cornelia, Wells (Thesis director) / Jennifer, Nelson (Committee member) / School of Art (Contributor) / Department of Psychology (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147951-Thumbnail Image.png
Description

A guide to implementing empathy in crisis communications

ContributorsLong, Mary Louise (Author) / Schmidtke, Lisa (Thesis director) / Bovio, Sonia (Committee member) / Department of Marketing (Contributor) / Walter Cronkite School of Journalism and Mass Comm (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description

Soiled: An Environmental Podcast is a six episode series where common environmental topics are discussed and misconceptions surrounding these topics are debunked.

ContributorsKuta, Tiffany T (Co-author) / Jones, Cassity (Co-author) / Turner, Natalie (Co-author) / Boyer, Mackenzie (Thesis director) / Ward, Kristen (Committee member) / Civil, Environmental and Sustainable Eng Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description

Soiled: An Environmental Podcast is a six episode series where common environmental topics are discussed and misconceptions surrounding these topics are debunked.

ContributorsJones, Cassity Rachelle (Co-author) / Kuta, Tiffany (Co-author) / Turner, Natalie (Co-author) / Boyer, Mackenzie (Thesis director) / Ward, Kristen (Committee member) / School of Life Sciences (Contributor) / School of Human Evolution & Social Change (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148217-Thumbnail Image.png
Description

The COVID-19 Pandemic has provided a challenge for educators to create virtual learning materials that are engaging and impactful during times of high stress and isolation. In this creative project, I explore the variety of virtual tools and web applications from Esri by creating a Story Map on the Verde

The COVID-19 Pandemic has provided a challenge for educators to create virtual learning materials that are engaging and impactful during times of high stress and isolation. In this creative project, I explore the variety of virtual tools and web applications from Esri by creating a Story Map on the Verde River Watershed. This Story Map is intended for an audience of students in late middle school and early high school but can be a resource to teachers for a wider age range. The integration of interactive technology and virtual tools in educational practices is likely to continue past the immediate circumstances of the COVID-19 pandemic. The purpose of this Story Map is to showcase one of the many uses for geospatial web applications beyond the immediate realm of GIS.

ContributorsTueller, Margaret (Author) / Frazier, Amy (Thesis director) / Dorn, Ron (Committee member) / School of Geographical Sciences and Urban Planning (Contributor, Contributor, Contributor) / Division of Teacher Preparation (Contributor) / The Design School (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05