Matching Items (54)
Filtering by
- All Subjects: Electrical Engineering
Description
Edge networks pose unique challenges for machine learning and network management. The primary objective of this dissertation is to study deep learning and adaptive control aspects of edge networks and to address some of the unique challenges therein. This dissertation explores four particular problems of interest at the intersection of edge intelligence, deep learning and network management. The first problem explores the learning of generative models in edge learning setting. Since the learning tasks in similar environments share model similarity, it is plausible to leverage pre-trained generative models from other edge nodes. Appealing to optimal transport theory tailored towards Wasserstein-1 generative adversarial networks, this part aims to develop a framework which systematically optimizes the generative model learning performance using local data at the edge node while exploiting the adaptive coalescence of pre-trained generative models from other nodes. In the second part, a many-to-one wireless architecture for federated learning at the network edge, where multiple edge devices collaboratively train a model using local data, is considered. The unreliable nature of wireless connectivity, togetherwith the constraints in computing resources at edge devices, dictates that the local updates at edge devices should be carefully crafted and compressed to match the wireless communication resources available and should work in concert with the receiver. Therefore, a Stochastic Gradient Descent based bandlimited coordinate descent algorithm is designed for such settings. The third part explores the adaptive traffic engineering algorithms in a dynamic network environment. The ages of traffic measurements exhibit significant variation due to asynchronization and random communication delays between routers and controllers. Inspired by the software defined networking architecture, a controller-assisted distributed routing scheme with recursive link weight reconfigurations, accounting for the impact of measurement ages and routing instability, is devised. The final part focuses on developing a federated learning based framework for traffic reshaping of electric vehicle (EV) charging. The absence of private EV owner information and scattered EV charging data among charging stations motivates the utilization of a federated learning approach. Federated learning algorithms are devised to minimize peak EV charging demand both spatially and temporarily, while maximizing the charging station profit.
ContributorsDedeoglu, Mehmet (Author) / Zhang, Junshan (Thesis advisor) / Kosut, Oliver (Committee member) / Zhang, Yanchao (Committee member) / Fan, Deliang (Committee member) / Arizona State University (Publisher)
Created2021
Description
In the rapidly evolving field of computer vision, propelled by advancements in deeplearning, the integration of hardware-software co-design has become crucial to overcome
the limitations of traditional imaging systems. This dissertation explores the integration
of hardware-software co-design in computational imaging, particularly in light transport
acquisition and Non-Line-of-Sight (NLOS) imaging. By leveraging projector-camera
systems and computational techniques, this thesis address critical challenges in imaging
complex environments, such as adverse weather conditions, low-light scenarios, and the
imaging of reflective or transparent objects.
The first contribution in this thesis is the theory, design, and implementation of a slope
disparity gating system, which is a vertically aligned configuration of a synchronized
raster scanning projector and rolling-shutter camera, facilitating selective imaging through
disparity-based triangulation. This system introduces a novel, hardware-oriented approach
to selective imaging, circumventing the limitations of post-capture processing.
The second contribution of this thesis is the realization of two innovative approaches
for spotlight optimization to improve localization and tracking for NLOS imaging. The
first approach utilizes radiosity-based optimization to improve 3D localization and object
identification for small-scale laboratory settings. The second approach introduces a learningbased
illumination network along with a differentiable renderer and NLOS estimation
network to optimize human 2D localization and activity recognition. This approach is
validated on a large, room-scale scene with complex line-of-sight geometries and occluders.
The third contribution of this thesis is an attention-based neural network for passive
NLOS settings where there is no controllable illumination. The thesis demonstrates realtime,
dynamic NLOS human tracking where the camera is moving on a mobile robotic platform. In addition, this thesis contains an appendix featuring temporally consistent
relighting for portrait videos with applications in computer graphics and vision.
ContributorsChandran, Sreenithy (Author) / Jayasuriya, Suren (Thesis advisor) / Turaga, Pavan (Committee member) / Dasarathy, Gautam (Committee member) / Kubo, Hiroyuki (Committee member) / Arizona State University (Publisher)
Created2024
Description
ABSTRACT
With the fast development of industry, it brings indelible pollution to the natural environment. As a consequence, the air quality is getting worse which will seriously affect people's health. With such concern, continuous air quality monitoring and prediction are necessary. Traditional air quality monitoring methods cannot use large amount of historical data to make accurate predic-tions. Moreover, the traditional prediction method can only roughly predict the air quality level in a short time. With the development of artificial intelligence al-gorithms [1] and high performance computing, the latest mathematical methods and algorithms are able to generate much more accurate predictions based on long term past data. In this master thesis project, it explore to develop deep learning based air quality prediction based on real sensor network time series air quality data from STAIR system [3].
ContributorsZhou, Zeming (Author) / Fan, Deliang (Thesis advisor) / Cao, Yu (Committee member) / Yu, Haofei (Committee member) / Arizona State University (Publisher)
Created2023
Description
Quantum computing has the potential to revolutionize the signal-processing field by providing more efficient methods for analyzing signals. This thesis explores the application of quantum computing in signal analysis synthesis for compression applications. More specifically, the study focuses on two key approaches: quantum Fourier transform (QFT) and quantum linear prediction (QLP). The research is motivated by the potential advantages offered by quantum computing in massive signal processing tasks and presents novel quantum circuit designs for QFT, quantum autocorrelation, and QLP, enabling signal analysis synthesis using quantum algorithms. The two approaches are explained as follows. The Quantum Fourier transform (QFT) demonstrates the potential for improved speed in quantum computing compared to classical methods. This thesis focuses on quantum encoding of signals and designing quantum algorithms for signal analysis synthesis, and signal compression using QFTs. Comparative studies are conducted to evaluate quantum computations for Fourier transform applications, considering Signal-to-Noise-Ratio results. The effects of qubit precision and quantum noise are also analyzed. The QFT algorithm is also developed in the J-DSP simulation environment, providing hands-on laboratory experiences for signal-processing students. User-friendly simulation programs on QFT-based signal analysis synthesis using peak picking, and perceptual selection using psychoacoustics in the J-DSP are developed. Further, this research is extended to analyze the autocorrelation of the signal using QFTs and develop a quantum linear prediction (QLP) algorithm for speech processing applications. QFTs and IQFTs are used to compute the quantum autocorrelation of the signal, and the HHL algorithm is modified and used to compute the solutions of the linear equations using quantum computing. The performance of the QLP algorithm is evaluated for system identification, spectral estimation, and speech analysis synthesis, and comparisons are performed for QLP and CLP results. The results demonstrate the following: effective quantum circuits for accurate QFT-based speech analysis synthesis, evaluation of performance with quantum noise, design of accurate quantum autocorrelation, and development of a modified HHL algorithm for efficient QLP. Overall, this thesis contributes to the research on quantum computing for signal processing applications and provides a foundation for further exploration of quantum algorithms for signal analysis synthesis.
ContributorsSharma, Aradhita (Author) / Spanias, Andreas (Thesis advisor) / Tepedelenlioğlu, Cihan (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2023
Description
Machine learning techniques have found extensive application in dynamic fields like drones, self-driving vehicles, surveillance, and more. Their effectiveness stems from meticulously crafted deep neural networks (DNNs), extensive data gathering efforts, and resource-intensive model training processes. However, due to the unpredictable nature of the environment, these systems will inevitably encounter input samples that deviate from the distribution of their original training data, resulting in instability and performance degradation.To effectively detect the emergence of out-of-distribution (OOD) data, this dissertation first proposes a novel, self-supervised approach that evaluates the Mahalanobis distance between the in-distribution (ID) and OOD in gradient space. A binary classifier is then introduced to guide the label selection for gradients calculation, which further boosts the detection performance.
Next, to continuously adapt the new OOD into the existing knowledge base, an unified framework for novelty detection and continual learning is proposed. The binary classifier, trained to distinguish OOD data from ID, is connected sequentially with the pre-trained model to form a “N + 1” classifier, where “N” represents prior knowledge which contains N classes and “1” refers to the newly arrival OOD. This continual learning process continues as “N+1+1+1+...”, assimilating the knowledge of each new OOD instance into the system.
Finally, this dissertation demonstrates the practical implementation of novelty detection and continual learning within the domain of thermal analysis. To rapidly address the impact of voids in thermal interface material (TIM), a continuous adaptation approach is proposed, which integrates trainable nodes into the graph at the locations where abnormal thermal behaviors are detected. With minimal training overhead, the model can quickly adapts to the change caused by the defects and regenerate accurate thermal prediction.
In summary, this dissertation proposes several algorithms and practical applications in continual learning aimed at enhancing the stability and adaptability of the system. All proposed algorithms are validated through extensive experiments conducted on benchmark datasets such as CIFAR-10, CIFAR-100, TinyImageNet for continual learning, and real thermal data for thermal analysis.
ContributorsSun, Jingbo (Author) / Cao, Yu (Thesis advisor) / Chhabria, Vidya (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Fan, Deliang (Committee member) / Seo, Jae-Sun (Committee member) / Arizona State University (Publisher)
Created2024
Description
Millimeter-wave (mmWave) and sub-terahertz (sub-THz) systems aim to utilize the large bandwidth available at these frequencies. This has the potential to enable several future applications that require high data rates, such as autonomous vehicles and digital twins. These systems, however, have several challenges that need to be addressed to realize their gains in practice. First, they need to deploy large antenna arrays and use narrow beams to guarantee sufficient receive power. Adjusting the narrow beams of the large antenna arrays incurs massive beam training overhead. Second, the sensitivity to blockages is a key challenge for mmWave and THz networks. Since these networks mainly rely on line-of-sight (LOS) links, sudden link blockages highly threaten the reliability of the networks. Further, when the LOS link is blocked, the network typically needs to hand off the user to another LOS basestation, which may incur critical time latency, especially if a search over a large codebook of narrow beams is needed. A promising way to tackle both these challenges lies in leveraging additional side information such as visual, LiDAR, radar, and position data. These sensors provide rich information about the wireless environment, which can be utilized for fast beam and blockage prediction. This dissertation presents a machine-learning framework for sensing-aided beam and blockage prediction. In particular, for beam prediction, this work proposes to utilize visual and positional data to predict the optimal beam indices. For the first time, this work investigates the sensing-aided beam prediction task in a real-world vehicle-to-infrastructure and drone communication scenario. Similarly, for blockage prediction, this dissertation proposes a multi-modal wireless communication solution that utilizes bimodal machine learning to perform proactive blockage prediction and user hand-off. Evaluations on both real-world and synthetic datasets illustrate the promising performance of the proposed solutions and highlight their potential for next-generation communication and sensing systems.
ContributorsCharan, Gouranga (Author) / Alkhateeb, Ahmed (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Turaga, Pavan (Committee member) / Michelusi, Nicolò (Committee member) / Arizona State University (Publisher)
Created2024
Description
Human movement is a complex process influenced by physiological and psychological factors. The execution of movement is varied from person to person, and the number of possible strategies for completing a specific movement task is almost infinite. Different choices of strategies can be perceived by humans as having different degrees of quality, and the quality can be defined with regard to aesthetic, athletic, or health-related ratings. It is useful to measure and track the quality of a person's movements, for various applications, especially with the prevalence of low-cost and portable cameras and sensors today. Furthermore, based on such measurements, feedback systems can be designed for people to practice their movements towards certain goals. In this dissertation, I introduce symmetry as a family of measures for movement quality, and utilize recent advances in computer vision and differential geometry to model and analyze different types of symmetry in human movements. Movements are modeled as trajectories on different types of manifolds, according to the representations of movements from sensor data. The benefit of such a universal framework is that it can accommodate different existing and future features that describe human movements. The theory and tools developed in this dissertation will also be useful in other scientific areas to analyze symmetry from high-dimensional signals.
ContributorsWang, Qiao (Author) / Turaga, Pavan (Thesis advisor) / Spanias, Andreas (Committee member) / Srivastava, Anuj (Committee member) / Sha, Xin Wei (Committee member) / Arizona State University (Publisher)
Created2018
Description
Generating real-world content for VR is challenging in terms of capturing and processing at high resolution and high frame-rates. The content needs to represent a truly immersive experience, where the user can look around in 360-degree view and perceive the depth of the scene. The existing solutions only capture and offload the compute load to the server. But offloading large amounts of raw camera feeds takes longer latencies and poses difficulties for real-time applications. By capturing and computing on the edge, we can closely integrate the systems and optimize for low latency. However, moving the traditional stitching algorithms to battery constrained device needs at least three orders of magnitude reduction in power. We believe that close integration of capture and compute stages will lead to reduced overall system power.
We approach the problem by building a hardware prototype and characterize the end-to-end system bottlenecks of power and performance. The prototype has 6 IMX274 cameras and uses Nvidia Jetson TX2 development board for capture and computation. We found that capturing is bottlenecked by sensor power and data-rates across interfaces, whereas compute is limited by the total number of computations per frame. Our characterization shows that redundant capture and redundant computations lead to high power, huge memory footprint, and high latency. The existing systems lack hardware-software co-design aspects, leading to excessive data transfers across the interfaces and expensive computations within the individual subsystems. Finally, we propose mechanisms to optimize the system for low power and low latency. We emphasize the importance of co-design of different subsystems to reduce and reuse the data. For example, reusing the motion vectors of the ISP stage reduces the memory footprint of the stereo correspondence stage. Our estimates show that pipelining and parallelization on custom FPGA can achieve real time stitching.
We approach the problem by building a hardware prototype and characterize the end-to-end system bottlenecks of power and performance. The prototype has 6 IMX274 cameras and uses Nvidia Jetson TX2 development board for capture and computation. We found that capturing is bottlenecked by sensor power and data-rates across interfaces, whereas compute is limited by the total number of computations per frame. Our characterization shows that redundant capture and redundant computations lead to high power, huge memory footprint, and high latency. The existing systems lack hardware-software co-design aspects, leading to excessive data transfers across the interfaces and expensive computations within the individual subsystems. Finally, we propose mechanisms to optimize the system for low power and low latency. We emphasize the importance of co-design of different subsystems to reduce and reuse the data. For example, reusing the motion vectors of the ISP stage reduces the memory footprint of the stereo correspondence stage. Our estimates show that pipelining and parallelization on custom FPGA can achieve real time stitching.
ContributorsGunnam, Sridhar (Author) / LiKamWa, Robert (Thesis advisor) / Turaga, Pavan (Committee member) / Jayasuriya, Suren (Committee member) / Arizona State University (Publisher)
Created2018
Description
Non-line-of-sight (NLOS) imaging of objects not visible to either the camera or illumina-
tion source is a challenging task with vital applications including surveillance and robotics.
Recent NLOS reconstruction advances have been achieved using time-resolved measure-
ments. Acquiring these time-resolved measurements requires expensive and specialized
detectors and laser sources. In work proposes a data-driven approach for NLOS 3D local-
ization requiring only a conventional camera and projector. The localisation is performed
using a voxelisation and a regression problem. Accuracy of greater than 90% is achieved
in localizing a NLOS object to a 5cm × 5cm × 5cm volume in real data. By adopting
the regression approach an object of width 10cm to localised to approximately 1.5cm. To
generalize to line-of-sight (LOS) scenes with non-planar surfaces, an adaptive lighting al-
gorithm is adopted. This algorithm, based on radiosity, identifies and illuminates scene
patches in the LOS which most contribute to the NLOS light paths, and can factor in sys-
tem power constraints. Improvements ranging from 6%-15% in accuracy with a non-planar
LOS wall using adaptive lighting is reported, demonstrating the advantage of combining
the physics of light transport with active illumination for data-driven NLOS imaging.
tion source is a challenging task with vital applications including surveillance and robotics.
Recent NLOS reconstruction advances have been achieved using time-resolved measure-
ments. Acquiring these time-resolved measurements requires expensive and specialized
detectors and laser sources. In work proposes a data-driven approach for NLOS 3D local-
ization requiring only a conventional camera and projector. The localisation is performed
using a voxelisation and a regression problem. Accuracy of greater than 90% is achieved
in localizing a NLOS object to a 5cm × 5cm × 5cm volume in real data. By adopting
the regression approach an object of width 10cm to localised to approximately 1.5cm. To
generalize to line-of-sight (LOS) scenes with non-planar surfaces, an adaptive lighting al-
gorithm is adopted. This algorithm, based on radiosity, identifies and illuminates scene
patches in the LOS which most contribute to the NLOS light paths, and can factor in sys-
tem power constraints. Improvements ranging from 6%-15% in accuracy with a non-planar
LOS wall using adaptive lighting is reported, demonstrating the advantage of combining
the physics of light transport with active illumination for data-driven NLOS imaging.
ContributorsChandran, Sreenithy (Author) / Jayasuriya, Suren (Thesis advisor) / Turaga, Pavan (Committee member) / Dasarathy, Gautam (Committee member) / Arizona State University (Publisher)
Created2019
Description
Disentangling latent spaces is an important research direction in the interpretability of unsupervised machine learning. Several recent works using deep learning are very effective at producing disentangled representations. However, in the unsupervised setting, there is no way to pre-specify which part of the latent space captures specific factors of variations. While this is generally a hard problem because of the non-existence of analytical expressions to capture these variations, there are certain factors like geometric
transforms that can be expressed analytically. Furthermore, in existing frameworks, the disentangled values are also not interpretable. The focus of this work is to disentangle these geometric factors of variations (which turn out to be nuisance factors for many applications) from the semantic content of the signal in an interpretable manner which in turn makes the features more discriminative. Experiments are designed to show the modularity of the approach with other disentangling strategies as well as on multiple one-dimensional (1D) and two-dimensional (2D) datasets, clearly indicating the efficacy of the proposed approach.
transforms that can be expressed analytically. Furthermore, in existing frameworks, the disentangled values are also not interpretable. The focus of this work is to disentangle these geometric factors of variations (which turn out to be nuisance factors for many applications) from the semantic content of the signal in an interpretable manner which in turn makes the features more discriminative. Experiments are designed to show the modularity of the approach with other disentangling strategies as well as on multiple one-dimensional (1D) and two-dimensional (2D) datasets, clearly indicating the efficacy of the proposed approach.
ContributorsKoneripalli Seetharam, Kaushik (Author) / Turaga, Pavan (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Jayasuriya, Suren (Committee member) / Arizona State University (Publisher)
Created2019