Matching Items (73)
Filtering by
- All Subjects: Electrical Engineering
- Creators: Tepedelenlioğlu, Cihan
- Member of: Theses and Dissertations
Description
With increased usage of green energy, the number of photovoltaic arrays used in power generation is increasing rapidly. Many of the arrays are located at remote locations where faults that occur within the array often go unnoticed and unattended for large periods of time. Technicians sent to rectify the faults have to spend a large amount of time determining the location of the fault manually. Automated monitoring systems are needed to obtain the information about the performance of the array and detect faults. Such systems must monitor the DC side of the array in addition to the AC side to identify non catastrophic faults. This thesis focuses on two of the requirements for DC side monitoring of an automated PV array monitoring system. The first part of the thesis quantifies the advantages of obtaining higher resolution data from a PV array on detection of faults. Data for the monitoring system can be gathered for the array as a whole or from additional places within the array such as individual modules and end of strings. The fault detection rate and the false positive rates are compared for array level, string level and module level PV data. Monte Carlo simulations are performed using PV array models developed in Simulink and MATLAB for fault and no fault cases. The second part describes a graphical user interface (GUI) that can be used to visualize the PV array for module level monitoring system information. A demonstration GUI is built in MATLAB using data obtained from a PV array test facility in Tempe, AZ. Visualizations are implemented to display information about the array as a whole or individual modules and locate faults in the array.
ContributorsKrishnan, Venkatachalam (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Spanias, Andreas (Thesis advisor) / Ayyanar, Raja (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2012
Description
The tracking of multiple targets becomes more challenging in complex environments due to the additional degrees of nonlinearity in the measurement model. In urban terrain, for example, there are multiple reflection path measurements that need to be exploited since line-of-sight observations are not always available. Multiple target tracking in urban terrain environments is traditionally implemented using sequential Monte Carlo filtering algorithms and data association techniques. However, data association techniques can be computationally intensive and require very strict conditions for efficient performance. This thesis investigates the probability hypothesis density (PHD) method for tracking multiple targets in urban environments. The PHD is based on the theory of random finite sets and it is implemented using the particle filter. Unlike data association methods, it can be used to estimate the number of targets as well as their corresponding tracks. A modified maximum-likelihood version of the PHD (MPHD) is proposed to automatically and adaptively estimate the measurement types available at each time step. Specifically, the MPHD allows measurement-to-nonlinearity associations such that the best matched measurement can be used at each time step, resulting in improved radar coverage and scene visibility. Numerical simulations demonstrate the effectiveness of the MPHD in improving tracking performance, both for tracking multiple targets and targets in clutter.
ContributorsZhou, Meng (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Tepedelenlioğlu, Cihan (Committee member) / Kovvali, Narayan (Committee member) / Arizona State University (Publisher)
Created2011
Description
This dissertation considers two different kinds of two-hop multiple-input multiple-output (MIMO) relay networks with beamforming (BF). First, "one-way" amplify-and-forward (AF) and decode-and-forward (DF) MIMO BF relay networks are considered, in which the relay amplifies or decodes the received signal from the source and forwards it to the destination, respectively, where all nodes beamform with multiple antennas to obtain gains in performance with reduced power consumption. A direct link from source to destination is included in performance analysis. Novel systematic upper-bounds and lower-bounds to average bit or symbol error rates (BERs or SERs) are proposed. Second, "two-way" AF MIMO BF relay networks are investigated, in which two sources exchange their data through a relay, to improve the spectral efficiency compared with one-way relay networks. Novel unified performance analysis is carried out for five different relaying schemes using two, three, and four time slots in sum-BER, the sum of two BERs at both sources, in two-way relay networks with and without direct links. For both kinds of relay networks, when any node is beamforming simultaneously to two nodes (i.e. from source to relay and destination in one-way relay networks, and from relay to both sources in two-way relay networks), the selection of the BF coefficients at a beamforming node becomes a challenging problem since it has to balance the needs of both receiving nodes. Although this "BF optimization" is performed for BER, SER, and sum-BER in this dissertation, the solution for optimal BF coefficients not only is difficult to implement, it also does not lend itself to performance analysis because the optimal BF coefficients cannot be expressed in closed-form. Therefore, the performance of optimal schemes through bounds, as well as suboptimal ones such as strong-path BF, which beamforms to the stronger path of two links based on their received signal-to-noise ratios (SNRs), is provided for BERs or SERs, for the first time. Since different channel state information (CSI) assumptions at the source, relay, and destination provide different error performance, various CSI assumptions are also considered.
ContributorsKim, Hyunjun (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Duman, Tolga M. (Committee member) / Hui, Yu (Committee member) / Zhang, Junshan (Committee member) / Arizona State University (Publisher)
Created2012
Description
With internet traffic being bursty in nature, Dynamic Bandwidth Allocation(DBA) Algorithms have always been very important for any broadband access network to utilize the available bandwidth effciently. It is no different for Passive Optical Networks(PON), which are networks based on fiber optics in the physical layer of TCP/IP stack or OSI model, which in turn increases the bandwidth in the upper layers. The work in this thesis covers general description of basic DBA Schemes and mathematical derivations that have been established in research. We introduce a Novel Survey Topology that classifes DBA schemes based on their functionality. The novel perspective of classification will be useful in determining which scheme will best suit consumer's needs. We classify DBA as Direct, Intelligent and Predictive back on its computation method and we are able to qualitatively describe their delay and throughput bounds. Also we describe a recently developed DBA Scheme, Multi-thread polling(MTP) used in LRPON and describes the different viewpoints and issues and consequently introduce a novel technique Parallel Polling that overcomes most of issues faced in MTP and that promises better delay performance for LRPON.
ContributorsMercian, Anu (Author) / Reisslein, Martin (Thesis advisor) / McGarry, Michael (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Zhang, Yanchao (Committee member) / Arizona State University (Publisher)
Created2012
Description
This thesis aims to investigate the capacity and bit error rate (BER) performance of multi-user diversity systems with random number of users and considers its application to cognitive radio systems. Ergodic capacity, normalized capacity, outage capacity, and average bit error rate metrics are studied. It has been found that the randomization of the number of users will reduce the ergodic capacity. A stochastic ordering framework is adopted to order user distributions, for example, Laplace transform ordering. The ergodic capacity under different user distributions will follow their corresponding Laplace transform order. The scaling law of ergodic capacity with mean number of users under Poisson and negative binomial user distributions are studied for large mean number of users and these two random distributions are ordered in Laplace transform ordering sense. The ergodic capacity per user is defined and is shown to increase when the total number of users is randomized, which is the opposite to the case of unnormalized ergodic capacity metric. Outage probability under slow fading is also considered and shown to decrease when the total number of users is randomized. The bit error rate (BER) in a general multi-user diversity system has a completely monotonic derivative, which implies that, according to the Jensen's inequality, the randomization of the total number of users will decrease the average BER performance. The special case of Poisson number of users and Rayleigh fading is studied. Combining with the knowledge of regular variation, the average BER is shown to achieve tightness in the Jensen's inequality. This is followed by the extension to the negative binomial number of users, for which the BER is derived and shown to be decreasing in the number of users. A single primary user cognitive radio system with multi-user diversity at the secondary users is proposed. Comparing to the general multi-user diversity system, there exists an interference constraint between secondary and primary users, which is independent of the secondary users' transmission. The secondary user with high- est transmitted SNR which also satisfies the interference constraint is selected to communicate. The active number of secondary users is a binomial random variable. This is then followed by a derivation of the scaling law of the ergodic capacity with mean number of users and the closed form expression of average BER under this situation. The ergodic capacity under binomial user distribution is shown to outperform the Poisson case. Monte-Carlo simulations are used to supplement our analytical results and compare the performance of different user distributions.
ContributorsZeng, Ruochen (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Duman, Tolga (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2012
Description
The ease of use of mobile devices and tablets by students has generated a lot of interest in the area of engineering education. By using mobile technologies in signal analysis and applied mathematics, undergraduate-level courses can broaden the scope and effectiveness of technical education in classrooms. The current mobile devices have abundant memory and powerful processors, in addition to providing interactive interfaces. Therefore, these devices can support the implementation of non-trivial signal processing algorithms. Several existing visual programming environments such as Java Digital Signal Processing (J-DSP), are built using the platform-independent infrastructure of Java applets. These enable students to perform signal-processing exercises over the Internet. However, some mobile devices do not support Java applets. Furthermore, mobile simulation environments rely heavily on establishing robust Internet connections with a remote server where the processing is performed. The interactive Java Digital Signal Processing tool (iJDSP) has been developed as graphical mobile app on iOS devices (iPads, iPhones and iPod touches). In contrast to existing mobile applications, iJDSP has the ability to execute simulations directly on the mobile devices, and is a completely stand-alone application. In addition to a substantial set of signal processing algorithms, iJDSP has a highly interactive graphical interface where block diagrams can be constructed using a simple drag-n-drop procedure. Functions such as visualization of the convolution operation, and an interface to wireless sensors have been developed. The convolution module animates the process of the continuous and discrete convolution operations, including time-shift and integration, so that users can observe and learn, intuitively. The current set of DSP functions in the application enables students to perform simulation exercises on continuous and discrete convolution, z-transform, filter design and the Fast Fourier Transform (FFT). The interface to wireless sensors in iJDSP allows users to import data from wireless sensor networks, and use the rich suite of functions in iJDSP for data processing. This allows users to perform operations such as localization, activity detection and data fusion. The exercises and the iJDSP application were evaluated by senior-level students at Arizona State University (ASU), and the results of those assessments are analyzed and reported in this thesis.
ContributorsHu, Shuang (Author) / Spanias, Andreas (Thesis advisor) / Tsakalis, Kostas (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2012
Description
Camera calibration has applications in the fields of robotic motion, geographic mapping, semiconductor defect characterization, and many more. This thesis considers camera calibration for the purpose of high accuracy three-dimensional reconstruction when characterizing ball grid arrays within the semiconductor industry. Bouguet's calibration method is used following a set of criteria with the purpose of studying the method's performance according to newly proposed standards. The performance of the camera calibration method is currently measured using standards such as pixel error and computational time. This thesis proposes the use of standard deviation of the intrinsic parameter estimation within a Monte Carlo simulation as a new standard of performance measure. It specifically shows that the standard deviation decreases based on the increased number of images input into the calibration routine. It is also shown that the default thresholds of the non-linear maximum likelihood estimation problem of the calibration method require change in order to improve computational time performance; however, the accuracy lost is negligable even for high accuracy requirements such as ball grid array characterization.
ContributorsStenger, Nickolas Arthur (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Kovvali, Narayan (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2012
Description
Insertion and deletion errors represent an important category of channel impairments. Despite their importance and much work over the years, channels with such impairments are far from being fully understood as they proved to be difficult to analyze. In this dissertation, a promising coding scheme is investigated over independent and identically distributed (i.i.d.) insertion/deletion channels, i.e., interleaved concatenation of an outer low-density parity-check (LDPC) code with error-correction capabilities and an inner marker code for synchronization purposes. Marker code structures which offer the highest achievable rates are found with standard bit-level synchronization is performed. Then, to exploit the correlations in the likelihoods corresponding to different transmitted bits, a novel symbol-level synchronization algorithm that works on groups of consecutive bits is introduced. Extrinsic information transfer (EXIT) charts are also utilized to analyze the convergence behavior of the receiver, and to design LDPC codes with degree distributions matched to these channels. The next focus is on segmented deletion channels. It is first shown that such channels are information stable, and hence their channel capacity exists. Several upper and lower bounds are then introduced in an attempt to understand the channel capacity behavior. The asymptotic behavior of the channel capacity is also quantified when the average bit deletion rate is small. Further, maximum-a-posteriori (MAP) based synchronization algorithms are developed and specific LDPC codes are designed to match the channel characteristics. Finally, in addition to binary substitution errors, coding schemes and the corresponding detection algorithms are also studied for several other models with synchronization errors, including inter-symbol interference (ISI) channels, channels with multiple transmit/receive elements and multi-user communication systems.
ContributorsWang, Feng (Author) / Duman, Tolga M. (Thesis advisor) / Tepedelenlioğlu, Cihan (Committee member) / Reisslein, Martin (Committee member) / Zhang, Junshan (Committee member) / Arizona State University (Publisher)
Created2012
Description
Both two-way relays (TWR) and full-duplex (FD) radios are spectrally efficient, and their integration shows great potential to further improve the spectral efficiency, which offers a solution to the fifth generation wireless systems. High quality channel state information (CSI) are the key components for the implementation and the performance of the FD TWR system, making channel estimation in FD TWRs crucial.
The impact of channel estimation on spectral efficiency in half-duplex multiple-input-multiple-output (MIMO) TWR systems is investigated. The trade-off between training and data energy is proposed. In the case that two sources are symmetric in power and number of antennas, a closed-form for the optimal ratio of data energy to total energy is derived. It can be shown that the achievable rate is a monotonically increasing function of the data length. The asymmetric case is discussed as well.
Efficient and accurate training schemes for FD TWRs are essential for profiting from the inherent spectrally efficient structures of both FD and TWRs. A novel one-block training scheme with a maximum likelihood (ML) estimator is proposed to estimate the channels between the nodes and the residual self-interference (RSI) channel simultaneously. Baseline training schemes are also considered to compare with the one-block scheme. The Cramer-Rao bounds (CRBs) of the training schemes are derived and analyzed by using the asymptotic properties of Toeplitz matrices. The benefit of estimating the RSI channel is shown analytically in terms of Fisher information.
To obtain fundamental and analytic results of how the RSI affects the spectral efficiency, one-way FD relay systems are studied. Optimal training design and ML channel estimation are proposed to estimate the RSI channel. The CRBs are derived and analyzed in closed-form so that the optimal training sequence can be found via minimizing the CRB. Extensions of the training scheme to frequency-selective channels and multiple relays are also presented.
Simultaneously sensing and transmission in an FD cognitive radio system with MIMO is considered. The trade-off between the transmission rate and the detection accuracy is characterized by the sum-rate of the primary and the secondary users. Different beamforming and combining schemes are proposed and compared.
The impact of channel estimation on spectral efficiency in half-duplex multiple-input-multiple-output (MIMO) TWR systems is investigated. The trade-off between training and data energy is proposed. In the case that two sources are symmetric in power and number of antennas, a closed-form for the optimal ratio of data energy to total energy is derived. It can be shown that the achievable rate is a monotonically increasing function of the data length. The asymmetric case is discussed as well.
Efficient and accurate training schemes for FD TWRs are essential for profiting from the inherent spectrally efficient structures of both FD and TWRs. A novel one-block training scheme with a maximum likelihood (ML) estimator is proposed to estimate the channels between the nodes and the residual self-interference (RSI) channel simultaneously. Baseline training schemes are also considered to compare with the one-block scheme. The Cramer-Rao bounds (CRBs) of the training schemes are derived and analyzed by using the asymptotic properties of Toeplitz matrices. The benefit of estimating the RSI channel is shown analytically in terms of Fisher information.
To obtain fundamental and analytic results of how the RSI affects the spectral efficiency, one-way FD relay systems are studied. Optimal training design and ML channel estimation are proposed to estimate the RSI channel. The CRBs are derived and analyzed in closed-form so that the optimal training sequence can be found via minimizing the CRB. Extensions of the training scheme to frequency-selective channels and multiple relays are also presented.
Simultaneously sensing and transmission in an FD cognitive radio system with MIMO is considered. The trade-off between the transmission rate and the detection accuracy is characterized by the sum-rate of the primary and the secondary users. Different beamforming and combining schemes are proposed and compared.
ContributorsLi, Xiaofeng (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Bliss, Daniel W (Committee member) / Kosut, Oliver (Committee member) / Arizona State University (Publisher)
Created2018
Description
Multiple-input multiple-output systems have gained focus in the last decade due to the benefits they provide in enhancing the quality of communications. On the other hand, full-duplex communication has attracted remarkable attention due to its ability to improve the spectral efficiency compared to the existing half-duplex systems. Using full-duplex communications on MIMO co-operative networks can provide us solutions that can completely outperform existing systems with simultaneous transmission and reception at high data rates.
This thesis considers a full-duplex MIMO relay which amplifies and forwards the received signals, between a source and a destination that do not a have line of sight. Full-duplex mode raises the problem of self-interference. Though all the links in the system undergo frequency flat fading, the end-to-end effective channel is frequency selective. This is due to the imperfect cancellation of the self-interference at the relay and this residual self-interference acts as intersymbol interference at the destination which is treated by equalization. This also leads to complications in form of recursive equations to determine the input-output relationship of the system. This also leads to complications in the form of recursive equations to determine the input-output relationship of the system.
To overcome this, a signal flow graph approach using Mason's gain formula is proposed, where the effective channel is analyzed with keen notice to every loop and path the signal traverses. This gives a clear understanding and awareness about the orders of the polynomials involved in the transfer function, from which desired conclusions can be drawn. But the complexity of Mason's gain formula increases with the number of antennas at relay which can be overcome by the proposed linear algebraic method. Input-output relationship derived using simple concepts of linear algebra can be generalized to any number of antennas and the computation complexity is comparatively very low.
For a full-duplex amplify-and-forward MIMO relay system, assuming equalization at the destination, new mechanisms have been implemented at the relay that can compensate the effect of residual self-interference namely equal-gain transmission and antenna selection. Though equal-gain transmission does not perform better than the maximal ratio transmission, a trade-off can be made between performance and implementation complexity. Using the proposed antenna selection strategy, one pair of transmit-receive antennas at the relay is selected based on four selection criteria discussed. Outage probability analysis is performed for all the strategies presented and detailed comparison has been established. Considering minimum mean-squared error decision feedback equalizer at the destination, a bound on the outage probability has been obtained for the antenna selection case and is used for comparisons. A cross-over point is observed while comparing the outage probabilities of equal-gain transmission and antenna selection techniques, as the signal-to-noise ratio increases and from that point antenna selection outperforms equal-gain transmission and this is explained by the fact of reduced residual self-interference in antenna selection method.
This thesis considers a full-duplex MIMO relay which amplifies and forwards the received signals, between a source and a destination that do not a have line of sight. Full-duplex mode raises the problem of self-interference. Though all the links in the system undergo frequency flat fading, the end-to-end effective channel is frequency selective. This is due to the imperfect cancellation of the self-interference at the relay and this residual self-interference acts as intersymbol interference at the destination which is treated by equalization. This also leads to complications in form of recursive equations to determine the input-output relationship of the system. This also leads to complications in the form of recursive equations to determine the input-output relationship of the system.
To overcome this, a signal flow graph approach using Mason's gain formula is proposed, where the effective channel is analyzed with keen notice to every loop and path the signal traverses. This gives a clear understanding and awareness about the orders of the polynomials involved in the transfer function, from which desired conclusions can be drawn. But the complexity of Mason's gain formula increases with the number of antennas at relay which can be overcome by the proposed linear algebraic method. Input-output relationship derived using simple concepts of linear algebra can be generalized to any number of antennas and the computation complexity is comparatively very low.
For a full-duplex amplify-and-forward MIMO relay system, assuming equalization at the destination, new mechanisms have been implemented at the relay that can compensate the effect of residual self-interference namely equal-gain transmission and antenna selection. Though equal-gain transmission does not perform better than the maximal ratio transmission, a trade-off can be made between performance and implementation complexity. Using the proposed antenna selection strategy, one pair of transmit-receive antennas at the relay is selected based on four selection criteria discussed. Outage probability analysis is performed for all the strategies presented and detailed comparison has been established. Considering minimum mean-squared error decision feedback equalizer at the destination, a bound on the outage probability has been obtained for the antenna selection case and is used for comparisons. A cross-over point is observed while comparing the outage probabilities of equal-gain transmission and antenna selection techniques, as the signal-to-noise ratio increases and from that point antenna selection outperforms equal-gain transmission and this is explained by the fact of reduced residual self-interference in antenna selection method.
ContributorsJonnalagadda, Geeta Sankar Kalyan (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Bliss, Daniel (Committee member) / Kosut, Oliver (Committee member) / Arizona State University (Publisher)
Created2018