Matching Items (6)
Filtering by
- All Subjects: Electrical Engineering
- Member of: ASU Electronic Theses and Dissertations
Description
Under the framework of intelligent management of power grids by leveraging advanced information, communication and control technologies, a primary objective of this study is to develop novel data mining and data processing schemes for several critical applications that can enhance the reliability of power systems. Specifically, this study is broadly organized into the following two parts: I) spatio-temporal wind power analysis for wind generation forecast and integration, and II) data mining and information fusion of synchrophasor measurements toward secure power grids. Part I is centered around wind power generation forecast and integration. First, a spatio-temporal analysis approach for short-term wind farm generation forecasting is proposed. Specifically, using extensive measurement data from an actual wind farm, the probability distribution and the level crossing rate of wind farm generation are characterized using tools from graphical learning and time-series analysis. Built on these spatial and temporal characterizations, finite state Markov chain models are developed, and a point forecast of wind farm generation is derived using the Markov chains. Then, multi-timescale scheduling and dispatch with stochastic wind generation and opportunistic demand response is investigated. Part II focuses on incorporating the emerging synchrophasor technology into the security assessment and the post-disturbance fault diagnosis of power systems. First, a data-mining framework is developed for on-line dynamic security assessment by using adaptive ensemble decision tree learning of real-time synchrophasor measurements. Under this framework, novel on-line dynamic security assessment schemes are devised, aiming to handle various factors (including variations of operating conditions, forced system topology change, and loss of critical synchrophasor measurements) that can have significant impact on the performance of conventional data-mining based on-line DSA schemes. Then, in the context of post-disturbance analysis, fault detection and localization of line outage is investigated using a dependency graph approach. It is shown that a dependency graph for voltage phase angles can be built according to the interconnection structure of power system, and line outage events can be detected and localized through networked data fusion of the synchrophasor measurements collected from multiple locations of power grids. Along a more practical avenue, a decentralized networked data fusion scheme is proposed for efficient fault detection and localization.
ContributorsHe, Miao (Author) / Zhang, Junshan (Thesis advisor) / Vittal, Vijay (Thesis advisor) / Hedman, Kory (Committee member) / Si, Jennie (Committee member) / Ye, Jieping (Committee member) / Arizona State University (Publisher)
Created2013
Description
Despite significant advances in digital pathology and automation sciences, current diagnostic practice for cancer detection primarily relies on a qualitative manual inspection of tissue architecture and cell and nuclear morphology in stained biopsies using low-magnification, two-dimensional (2D) brightfield microscopy. The efficacy of this process is limited by inter-operator variations in sample preparation and imaging, and by inter-observer variability in assessment. Over the past few decades, the predictive value quantitative morphology measurements derived from computerized analysis of micrographs has been compromised by the inability of 2D microscopy to capture information in the third dimension, and by the anisotropic spatial resolution inherent to conventional microscopy techniques that generate volumetric images by stacking 2D optical sections to approximate 3D. To gain insight into the analytical 3D nature of cells, this dissertation explores the application of a new technology for single-cell optical computed tomography (optical cell CT) that is a promising 3D tomographic imaging technique which uses visible light absorption to image stained cells individually with sub-micron, isotropic spatial resolution. This dissertation provides a scalable analytical framework to perform fully-automated 3D morphological analysis from transmission-mode optical cell CT images of hematoxylin-stained cells. The developed framework performs rapid and accurate quantification of 3D cell and nuclear morphology, facilitates assessment of morphological heterogeneity, and generates shape- and texture-based biosignatures predictive of the cell state. Custom 3D image segmentation methods were developed to precisely delineate volumes of interest (VOIs) from reconstructed cell images. Comparison with user-defined ground truth assessments yielded an average agreement (DICE coefficient) of 94% for the cell and its nucleus. Seventy nine biologically relevant morphological descriptors (features) were computed from the segmented VOIs, and statistical classification methods were implemented to determine the subset of features that best predicted cell health. The efficacy of our proposed framework was demonstrated on an in vitro model of multistep carcinogenesis in human Barrett's esophagus (BE) and classifier performance using our 3D morphometric analysis was compared against computerized analysis of 2D image slices that reflected conventional cytological observation. Our results enable sensitive and specific nuclear grade classification for early cancer diagnosis and underline the value of the approach as an objective adjunctive tool to better understand morphological changes associated with malignant transformation.
ContributorsNandakumar, Vivek (Author) / Meldrum, Deirdre R (Thesis advisor) / Nelson, Alan C. (Committee member) / Karam, Lina J (Committee member) / Ye, Jieping (Committee member) / Johnson, Roger H (Committee member) / Bussey, Kimberly J (Committee member) / Arizona State University (Publisher)
Created2013
Description
Reliable extraction of human pose features that are invariant to view angle and body shape changes is critical for advancing human movement analysis. In this dissertation, the multifactor analysis techniques, including the multilinear analysis and the multifactor Gaussian process methods, have been exploited to extract such invariant pose features from video data by decomposing various key contributing factors, such as pose, view angle, and body shape, in the generation of the image observations. Experimental results have shown that the resulting pose features extracted using the proposed methods exhibit excellent invariance properties to changes in view angles and body shapes. Furthermore, using the proposed invariant multifactor pose features, a suite of simple while effective algorithms have been developed to solve the movement recognition and pose estimation problems. Using these proposed algorithms, excellent human movement analysis results have been obtained, and most of them are superior to those obtained from state-of-the-art algorithms on the same testing datasets. Moreover, a number of key movement analysis challenges, including robust online gesture spotting and multi-camera gesture recognition, have also been addressed in this research. To this end, an online gesture spotting framework has been developed to automatically detect and learn non-gesture movement patterns to improve gesture localization and recognition from continuous data streams using a hidden Markov network. In addition, the optimal data fusion scheme has been investigated for multicamera gesture recognition, and the decision-level camera fusion scheme using the product rule has been found to be optimal for gesture recognition using multiple uncalibrated cameras. Furthermore, the challenge of optimal camera selection in multi-camera gesture recognition has also been tackled. A measure to quantify the complementary strength across cameras has been proposed. Experimental results obtained from a real-life gesture recognition dataset have shown that the optimal camera combinations identified according to the proposed complementary measure always lead to the best gesture recognition results.
ContributorsPeng, Bo (Author) / Qian, Gang (Thesis advisor) / Ye, Jieping (Committee member) / Li, Baoxin (Committee member) / Spanias, Andreas (Committee member) / Arizona State University (Publisher)
Created2011
Description
Network-on-Chip (NoC) architectures have emerged as the solution to the on-chip communication challenges of multi-core embedded processor architectures. Design space exploration and performance evaluation of a NoC design requires fast simulation infrastructure. Simulation of register transfer level model of NoC is too slow for any meaningful design space exploration. One of the solutions to reduce the speed of simulation is to increase the level of abstraction. SystemC TLM2.0 provides the capability to model hardware design at higher levels of abstraction with trade-off of simulation speed and accuracy. In this thesis, SystemC TLM2.0 models of NoC routers are developed at three levels of abstraction namely loosely-timed, approximately-timed, and cycle accurate. Simulation speed and accuracy of these three models are evaluated by a case study of a 4x4 mesh NoC.
ContributorsArlagadda Narasimharaju, Jyothi Swaroop (Author) / Chatha, Karamvir S (Thesis advisor) / Sen, Arunabha (Committee member) / Shrivastava, Aviral (Committee member) / Arizona State University (Publisher)
Created2012
Description
The accurate monitoring of the bulk transmission system of the electric power grid by sensors, such as Remote Terminal Units (RTUs) and Phasor Measurement Units (PMUs), is essential for maintaining the reliability of the modern power system. One of the primary objectives of power system monitoring is the identification of the snapshots of the system at regular intervals by performing state estimation using the available measurements from the sensors. The process of state estimation corresponds to the estimation of the complex voltages at all buses of the system. PMU measurements play an important role in this regard, because of the time-synchronized nature of these measurements as well as the faster rates at which they are produced. However, a model-based linear state estimator created using PMU-only data requires complete observability of the system by PMUs for its continuous functioning. The conventional model-based techniques also make certain assumptions in the modeling of the physical system, such as the constant values of the line parameters. The measurement error models in the conventional state estimators are also assumed to follow a Gaussian distribution. In this research, a data mining technique using Deep Neural Networks (DNNs) is proposed for performing a high-speed, time-synchronized state estimation of the transmission system of the power system. The proposed technique uses historical data to identify the correlation between the measurements and the system states as opposed to directly using the physical model of the system. Therefore, the highlight of the proposed technique is its ability to provide an accurate, fast, time-synchronized estimate of the system states even in the absence of complete system observability by PMUs.
The state estimator is formulated for the IEEE 118-bus system and its reliable performance is demonstrated in the presence of redundant observability, complete observability, and incomplete observability. The robustness of the state estimator is also demonstrated by performing the estimation in presence of Non-Gaussian measurement errors and varying line parameters. The consistency of the DNN state estimator is demonstrated by performing state estimation for an entire day.
The state estimator is formulated for the IEEE 118-bus system and its reliable performance is demonstrated in the presence of redundant observability, complete observability, and incomplete observability. The robustness of the state estimator is also demonstrated by performing the estimation in presence of Non-Gaussian measurement errors and varying line parameters. The consistency of the DNN state estimator is demonstrated by performing state estimation for an entire day.
ContributorsChandrasekaran, Harish (Author) / Pal, Anamitra (Thesis advisor) / Sen, Arunabha (Committee member) / Tylavsky, Daniel (Committee member) / Arizona State University (Publisher)
Created2020
Description
Due to the rapid penetration of solar power systems in residential areas, there has
been a dramatic increase in bidirectional power flow. Such a phenomenon of bidirectional
power flow creates a need to know where Photovoltaic (PV) systems are
located, what their quantity is, and how much they generate. However, significant
challenges exist for accurate solar panel detection, capacity quantification,
and generation estimation by employing existing methods, because of the limited
labeled ground truth and relatively poor performance for direct supervised learning.
To mitigate these issue, this thesis revolutionizes key learning concepts to (1)
largely increase the volume of training data set and expand the labelled data set by
creating highly realistic solar panel images, (2) boost detection and quantification
learning through physical knowledge and (3) greatly enhance the generation estimation
capability by utilizing effective features and neighboring generation patterns.
These techniques not only reshape the machine learning methods in the GIS
domain but also provides a highly accurate solution to gain a better understanding
of distribution networks with high PV penetration. The numerical
validation and performance evaluation establishes the high accuracy and scalability
of the proposed methodologies on the existing solar power systems in the
Southwest region of the United States of America. The distribution and transmission
networks both have primitive control methodologies, but now is the high time
to work out intelligent control schemes based on reinforcement learning and show
that they can not only perform well but also have the ability to adapt to the changing
environments. This thesis proposes a sequence task-based learning method to
create an agent that can learn to come up with the best action set that can overcome
the issues of transient over-voltage.
been a dramatic increase in bidirectional power flow. Such a phenomenon of bidirectional
power flow creates a need to know where Photovoltaic (PV) systems are
located, what their quantity is, and how much they generate. However, significant
challenges exist for accurate solar panel detection, capacity quantification,
and generation estimation by employing existing methods, because of the limited
labeled ground truth and relatively poor performance for direct supervised learning.
To mitigate these issue, this thesis revolutionizes key learning concepts to (1)
largely increase the volume of training data set and expand the labelled data set by
creating highly realistic solar panel images, (2) boost detection and quantification
learning through physical knowledge and (3) greatly enhance the generation estimation
capability by utilizing effective features and neighboring generation patterns.
These techniques not only reshape the machine learning methods in the GIS
domain but also provides a highly accurate solution to gain a better understanding
of distribution networks with high PV penetration. The numerical
validation and performance evaluation establishes the high accuracy and scalability
of the proposed methodologies on the existing solar power systems in the
Southwest region of the United States of America. The distribution and transmission
networks both have primitive control methodologies, but now is the high time
to work out intelligent control schemes based on reinforcement learning and show
that they can not only perform well but also have the ability to adapt to the changing
environments. This thesis proposes a sequence task-based learning method to
create an agent that can learn to come up with the best action set that can overcome
the issues of transient over-voltage.
ContributorsHashmy, Syed Muhammad Yousaf (Author) / Weng, Yang (Thesis advisor) / Sen, Arunabha (Committee member) / Qin, Jiangchao (Committee member) / Arizona State University (Publisher)
Created2019