Matching Items (818)
Filtering by
- All Subjects: Electrical Engineering
- All Subjects: Mechanical Engineering
- Genre: Masters Thesis
Description
Advancements in three-dimensional (3D) additive manufacturing techniques have opened up new possibilities for healthcare systems and the medical industry, allowing for the realization of concepts that were once confined to theoretical discussions. Among these groundbreaking research endeavors is the development of intricate magnetic structures that can be actuated through non-invasive methods, including electromagnetic and magnetic actuation. Magnetic actuation, in particular, offers the advantage of untethered operation. In this study, a photopolymerizable resin infused with Fe3O4 oxide nanoparticles is employed in the printing process using the micro-continuous liquid interface production technique. The objective is to optimize the manufacturing process to produce microstructures featuring smooth surfaces and reduced surface porosity, and enhanced flexibility and magnetic actuation. Various intricate structures are fabricated to validate the printing process's capabilities. Furthermore, the assessment of the flexibilty of these 3D-printed structures is conducted in the presence of an external magnetic field using a homemade bending test setup, allowing for a comprehensive characterization of these components. This research serves as a foundation for the future design and development of micro-robots using micro-continuous liquid interface production technique.
ContributorsJha, Ujjawal (Author) / Chen, Xiangfan (Thesis advisor) / Li, Xiangjia (Committee member) / Jin, Kailong (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2023
Description
This work presents two balanced power amplifier (PA) architectures, one at X-band and the other at K-band. The presented balanced PAs are designed for use in small satellite and cube satellite applications.The presented X-band PA employs wideband hybrid couplers to split input power to two commercial off-the-shelf (COTS) Gallium Nitride (GaN) monolithic microwave integrated circuit (MMIC) PAs and combine their output powers. The presented X-band balanced PA manufactured on a Rogers 4003C substrate yields increased small signal gain and saturated output power under continuous wave (CW) operation compared to the single MMIC PA used in the design under pulsed operation. The presented PA operates from 7.5 GHz to 11.5 GHz, has a maximum small signal gain of 36.3 dB, a maximum saturated power out of 40.0 dBm, and a maximum power added efficiency (PAE) of 38%.
Both a Wilkinson and a Gysel splitter and combiner are designed for use at K-band and their performance is compared. The presented K-band balanced PA uses Gysel power dividers and combiners with a GaN MMIC PA that is soon to be released in production.
ContributorsPearson, Katherine Elizabeth (Author) / Kitchen, Jennifer (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Ozev, Sule (Committee member) / Arizona State University (Publisher)
Created2023
Description
Ethylene is one of the most widely used organic compounds worldwide with ever increasing demand. Almost all the industries currently producing ethylene globally use the method of steam cracking, which, though highly selective and cost effective, is energy intensive along with having a high carbon footprint. This study aims to analyze micro-scale partial oxidation of propane as a novel approach towards ethylene generation which is simpler, less energy consuming, operates at lower temperatures and causes minimum CO2 emission. The experimental study endeavors to maximize the ethylene production by investigating the effect of variables such as temperature, flow rate, equivalence ratio and reactor diameter. The micro-scale partial oxidation of propane is studied inside quartz tube reactors of 1 mm and 3 mm diameter at a temperature range of 800 to 900 oC, at varying flow rates of 10 to 100 sccm and equivalence ratios of 1 to 6. The study reveals ethylene yield has a strong dependence on all the above factors. However, the factors are not completely independent of each other. Adjusting certain factors and levels results in greater ethylene yields as high as 10%, but propane to ethylene conversion efficiency is approximately constant for most conditions. Low CO2 concentrations are also recorded for most of the factor and level combinations, indicating the potential to achieve lower CO2 yields compared to conventional approaches. The investigation indicates promise for application in the field of ethylene generation.
ContributorsMAHALKAR, PAWAN MUKUND (Author) / Milcarek, Ryan (Thesis advisor) / Kwon, Beomjin (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2023
Description
Digital signal processing accelerator architectures are designed to provide either high-energy efficiency or high programmability depending on the targeted application and use case. For example, Domain Adaptive Processor (DAP), a highly reconfigurable array architecture, designed by University of Michigan, for signal processing workloads is highly energy efficient but difficult to program. DAP consists of 8x8 array of Processing elements (PE) with each PE containing four heterogeneous SUB-PEs. Each SUB-PE has its own instruction memory and is capable of executing Very Large Instruction Word (VLIW) instructions. Unfortunately, instructions have to be written for every cycle of computation for each SUB-PE used in the application and handcrafted such that all the inter-PE dependencies are synchronized. This thesis builds up on prior work at Arizona State University(ASU) to make DAP more programmable. First, the compiler back-end developed at ASU is extended with more features. Prior work introduced DAP Instruction Set Architecture (ISA), an assembly instruction format, and proposed a compiler framework, called DAP Assembler, with optimization passes to reduce the complexity of programming applications in DAP. While this back-end infrastructure helped generated code with relative ease compared to Very Large Instruction Word (VLIW) code by hand, the output of the code generated was not software-pipelined and the code generated for each Processing Element(PE) had to be manually synchronized. So in this thesis, DAP Assembler tool is extended to support software-pipelining for high throughput applications. Further, a generic synchronization tool is proposed to synchronize instructions in a multi-PE setup and integrated with DAP Assembler to generate synchronized high-throughput application code. Second, a Multi-Level Intermediate Representation(MLIR) based compiler front-end infrastructure is proposed to first lower the application code written by the programmer to an Intermediate Representation (IR) that is suitable for generic array architectures and then further converted to DAP-specific IR that can be used for generating machine code for DAP using DAP ISA. This two stage process enables this infrastructure to be more easily adapted to other array architectures. The first conversion pass uses a designer-provided modular hardware architecture information, called Resource Registry, to allocate operations in the input IR to resources in the Resource registry and capture all data movement. While the resource registry changes from architecture to architecture, the conversion pass algorithm is generic and can be used for other architectures. The second conversion pass is more geared towards DAP and integrates DAP specific constructs to generate optimized instruction in DAP ISA. Multiple kernels such as matrix multiplication, vector-vector addition were implemented using this infrastructure and the code generated by the tool verified to be functionally correct.
ContributorsMurugan, Narayanan (Author) / Chakrabarti, Chaitali Dr (Thesis advisor) / Akoglu, Ali Dr (Committee member) / Bliss, Daniel Dr (Committee member) / Arizona State University (Publisher)
Created2023
Description
Kuwait is committed to implementing the Kyoto Protocol in “Vision 2035” to reduce greenhouse gas emissions by shifting to the use of wind and solar energies [1]. The specific goal of the Vision 2035 is for renewables to comprise 15% of Kuwait’s electrical generation by 2030. Wind and solar are abundant in Kuwait and can easily provide 15% of the total electrical generation. However, there are three significant obstacles. The first is Kuwait currently depends heavily on rapidly diminishing fossil fuels which are the major sources of CO2, NOx, and SOx emissions. Unfortunately, current plans are to build two conventional power stations by 2024. The purpose is to cover the energy needs for growing population. The second problem is that Kuwait has a very small land area. Consequently, there is limited space to build new utility-scale renewable power stations. The third issue is the low electricity tariff provides little incentive for the population to save energy. Offshore wind farms have the potential to provide thousands of GWh/yr to accomplish the goals of Vision 2035. Kuwait has a vast untapped supply of offshore wind energy. Specifically, there are eight offshore locations in which 50 turbines could be built each, for a total of 400 turbines. Using 4.2 MW turbines, this would provide 1.68 GW of wind energy, and increase the renewable portion of the electrical energy production to 13.93% (including Shagaya renewable park). Installing battery storage with the proposed wind turbines could provide fast ramp response which would serve to complement existing power production on Kuwait’s grid. In this work, six different turbines with different sizes are considered from 2.5 MW to 4.2 MW (from well-known manufacturers, such as, Nordex and Vestas), but ultimately 4.2 MW turbines are recommended. Data for this study has been supplied by: A) Civil Aviation -- temperature and wind speed, B) Ministry of Electricity and Water (MEW) -- electricity data, and C) Public Authority for Civil Information -- population data.
ContributorsAlotaibi, Abdullah Saqer (Author) / Calhoun, Ronald (Thesis advisor) / Kitchen, Jennifer (Thesis advisor) / Roedel, Ronald (Committee member) / Mayyas, Abdul Ra'ouf (Committee member) / Arizona State University (Publisher)
Created2020
Description
Integrating advanced materials with innovative manufacturing techniques has propelled the field of additive manufacturing into new frontiers. This study explores the rapid 3D printing of reduced graphene oxide/polymer composites using Micro-Continuous Liquid Interface Production (μCLIP), a cutting-edge technology known for its speed and precision. A printable ink is formulated with reduced graphene oxide for μCLIP-based 3D printing. The research focuses on optimizing μCLIP parameters to fabricate reduced graphene composites efficiently. The study encompasses material synthesis, ink formulation and explores the resulting material's structural and electrical properties. The marriage of graphene's unique attributes with the rapid prototyping capabilities of μCLIP opens new avenues for scalable and rapid production in applications such as energy storage, sensors, and lightweight structural components. This work contributes to the evolving landscape of advanced materials and additive manufacturing, offering insights into the synthesis, characterization, and potential applications of 3D printed reduced graphene oxide/polymercomposites.
ContributorsRavishankar, Chayaank Bangalore (Author) / Chen, Xiangfan (Thesis advisor) / Bhate, Dhruv (Committee member) / Azeredo, Bruno (Committee member) / Arizona State University (Publisher)
Created2024
Description
Alzheimer's disease (AD) and Alzheimer's Related Dementias (ADRD) is projected to affect 50 million people globally in the coming decades. Clinical research suggests that Mild Cognitive Impairment (MCI), a precursor to dementia, offers a critical window for lifestyle interventions to delay or prevent the progression of AD/ADRD. Previous research indicates that lifestyle changes, including increased physical exercise, reduced caloric intake, and mentally stimulating exercises, can reduce the risk of MCI. Early detection of MCI is challenging due to subtle and often unnoticed cognitive decline, traditionally monitored through infrequent clinical tests. As part of this research, the Smart Driving System was proposed, a novel, unobtrusive, and economical technology to detect early stages of neurodegenerative diseases. This system, leveraging a multi-modal biosensing array (MMS) and AI algorithms, assesses daily driving behavior, offering insights into a driver's cognitive function. The ultimate goal is to develop the Smart Driving Device and App, integrating it into vehicles, and validating its effectiveness in detecting MCI through comprehensive pilot studies. The Smart Driving System represents a breakthrough in AD/ADRD management, promising significant improvements in early detection and offering a scalable, cost-effective solution for monitoring cognitive health in real-world settings.
ContributorsSerhan, Peter (Author) / Forzani, Erica (Thesis advisor) / Wu, Teresa (Committee member) / Hihath, Joshua (Committee member) / Arizona State University (Publisher)
Created2024
Description
The measurement of the radiation and convection that the human body experiences are important for ensuring safety in extreme heat conditions. The radiation from the surroundings on the human body is most often measured using globe or cylindrical radiometers. The large errors stemming from differences in internal and exterior temperatures and indirect estimation of convection can be resolved by simultaneously using three cylindrical radiometers (1 cm diameter, 9 cm height) with varying surface properties and internal heating. With three surface balances, the three unknowns (heat transfer coefficient, shortwave, and longwave radiation) can be solved for directly. As compared to integral radiation measurement technique, however, the bottom mounting using a wooden-dowel of the three-cylinder radiometers resulted in underestimated the total absorbed radiation. This first part of this thesis focuses on reducing the size of the three-cylinder radiometers and an alternative mounting that resolves the prior issues. In particular, the heat transfer coefficient in laminar wind tunnel with wind speed of 0.25 to 5 m/s is measured for six polished, heated cylinders with diameter of 1 cm and height of 1.5 to 9 cm mounted using a wooden dowel. For cylinders with height of 6 cm and above, the heat transfer coefficients are independent of the height and agree with the Hilpert correlation for infinitely long cylinder. Subsequently, a side-mounting for heated 6 cm tall cylinder with top and bottom metallic caps is developed and tested within the wind tunnel. The heat transfer coefficient is shown to be independent of the flow-side mounting and in agreement with the Hilpert correlation.
The second part of this thesis explores feasibility of employing the three-cylinder concept to measuring all air-flow parameters relevant to human convection including mean wind speed, turbulence intensity and length scale. Heated cylinders with same surface properties but varying diameters are fabricated. Uniformity of their exterior temperature, which is fundamental to the three-cylinder anemometer concept, is tested during operation using infrared camera. To provide a lab-based method to measure convection from the cylinders in turbulent flow, several designs of turbulence-generating fractal grids are laser-cut and introduced into the wind tunnel.
ContributorsGupta, Mahima (Author) / Rykaczewski, Konrad (Thesis advisor) / Pathikonda, Gokul (Thesis advisor) / Middel, Ariane (Committee member) / Arizona State University (Publisher)
Created2024