Matching Items (4)
Filtering by
- All Subjects: Electric Field Imaging
- All Subjects: engineering
Description
This project examines the science of electric field sensing and completes experiments, gathering data to support its utility for various applications. The basic system consists of a transmitter, receiver, and lock-in amplifier. The primary goal of the study was to determine if such a system could detect a human disturbance, due to the capacitance of a human body, and such a thesis was supported. Much different results were obtained when a person disturbed the electric field transmitted by the system than when other types of objects, such as chairs and electronic devices, were placed in the field. In fact, there was a distinct difference between persons of varied sizes as well. This thesis goes through the basic design of the system and the process of experimental design for determining the capabilities of such an electric field sensing system.
ContributorsBranham, Breana Michelle (Author) / Allee, David (Thesis director) / Papandreou-Suppappola, Antonia (Committee member) / Phillips, Stephen (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor) / School of International Letters and Cultures (Contributor)
Created2013-05
Description
Imaging using electric fields could provide a cheaper, safer, and easier alternative to the standard methods used for imaging. The viability of electric field imaging at very low frequencies using D-dot sensors has already been investigated and proven. The new goal is to determine if imaging is viable at high frequencies. In order to accomplish this, the operational amplifiers used in the very low frequency imaging test set up must be replaced with ones that have higher bandwidth. The trade-off of using these amplifiers is that they have a typical higher input leakage current on the order of 100 compared to the standard. Using a modified circuit design technique that reduces input leakage current of the operational amplifiers used in the imaging test setup, a printed circuit board with D-dot sensors is fabricated to identify the frequency limitations of electric field imaging. Data is collected at both low and high frequencies as well as low peak voltage. The data is then analyzed to determine the range in intensity of electric field and frequency that this circuit low-leakage design can accurately detect a signal. Data is also collected using another printed circuit board that uses the standard circuit design technique. The data taken from the different boards is compared to identify if the modified circuit design technique allows for higher sensitivity imaging. In conclusion, this research supports that using low-leakage design techniques can allow for signal detection comparable to that of the standard circuit design. The low-leakage design allowed for sensitivity within a factor two to that of the standard design. Although testing at higher frequencies was limited, signal detection for the low-leakage design was reliable up until 97 kHz, but further experimentation is needed to determine the upper frequency limits.
ContributorsLin, Richard (Co-author) / Angell, Tyler (Co-author) / Allee, David (Thesis director) / Chung, Hugh (Committee member) / Electrical Engineering Program (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
The field of computed tomography involves reconstructing an image from lower dimensional projections. This is particularly useful for visualizing the inner structure of an object. Presented here is an imaging setup meant for use in computed tomography applications. This imaging setup relies on imaging electric fields through active interrogation. Models designed in Ansys Maxwell are used to simulate this setup and produce 2D images of an object from 1D projections to verify electric field imaging as a potential route for future computed tomography applications. The results of this thesis show reconstructed images that resemble the object being imaged using a filtered back projection method of reconstruction. This work concludes that electric field imaging is a promising option for computed tomography applications.
ContributorsDrummond, Zachary Daniel (Author) / Allee, David (Thesis director) / Cochran, Douglas (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
In-Band Full-Duplex (IBFD) can maximize the spectral resources and enable new types of technology, but generates self-interference (SI) that must be mitigated to enable practical applications. Analog domain SI cancellation (SIC), usually implemented as a digitally controlled adaptive filter, is one technique that is necessary to mitigate the interference below the noise floor. To maximize the efficiency and performance of the adaptive filter this thesis studies how key design choices impact the performance so that device designers can make better tradeoff decisions. Additionally, algorithms are introduced to maximize the SIC that incorporate the hardware constraints. The provided simulations show up to 45dB SIC with 7 bits of precision at 100MHz bandwidth.
ContributorsMorgenstern, Carl Willis (Author) / Bliss, Daniel W (Thesis advisor) / Herschfelt, Andrew (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Rong, Yu (Committee member) / Allee, David (Committee member) / Arizona State University (Publisher)
Created2023