Matching Items (22)
Filtering by
- All Subjects: engineering
- All Subjects: Industrial Engineering
- Creators: Bakkaloglu, Bertan
Description
Pulse Density Modulation- (PDM-) based class-D amplifiers can reduce non-linearity and tonal content due to carrier signal in Pulse Width Modulation - (PWM-) based amplifiers. However, their low-voltage analog implementations also require a linear- loop filter and a quantizer. A PDM-based class-D audio amplifier using a frequency-domain quantization is presented in this paper. The digital-intensive frequency domain approach achieves high linearity under low-supply regimes. An analog comparator and a single-bit quantizer are replaced with a Current-Controlled Oscillator- (ICO-) based frequency discriminator. By using the ICO as a phase integrator, a third-order noise shaping is achieved using only two analog integrators. A single-loop, singlebit class-D audio amplifier is presented with an H-bridge switching power stage, which is designed and fabricated on a 0.18 um CMOS process, with 6 layers of metal achieving a total harmonic distortion plus noise (THD+N) of 0.065% and a peak power efficiency of 80% while driving a 4-ohms loudspeaker load. The amplifier can deliver the output power of 280 mW.
ContributorsLee, Junghan (Author) / Bakkaloglu, Bertan (Thesis advisor) / Kiaei, Sayfe (Committee member) / Ozev, Sule (Committee member) / Song, Hongjiang (Committee member) / Arizona State University (Publisher)
Created2011
Description
ABSTRACT To meet stringent market demands, manufacturers must produce Radio Frequency (RF) transceivers that provide wireless communication between electronic components used in consumer products at extremely low cost. Semiconductor manufacturers are in a steady race to increase integration levels through advanced system-on-chip (SoC) technology. The testing costs of these devices tend to increase with higher integration levels. As the integration levels increase and the devices get faster, the need for high-calibre low cost test equipment become highly dominant. However testing the overall system becomes harder and more expensive. Traditionally, the transceiver system is tested in two steps utilizing high-calibre RF instrumentation and mixed-signal testers, with separate measurement setups for transmitter and receiver paths. Impairments in the RF front-end, such as the I/Q gain and phase imbalance and nonlinearity, severely affect the performance of the device. The transceiver needs to be characterized in terms of these impairments in order to guarantee good performance and specification requirements. The motivation factor for this thesis is to come up with a low cost and computationally simple extraction technique of these impairments. In the proposed extraction technique, the mapping between transmitter input signals and receiver output signals are used to extract the impairment and nonlinearity parameters. This is done with the help of detailed mathematical modeling of the transceiver. While the overall behavior is nonlinear, both linear and nonlinear models to be used under different test setups are developed. A two step extraction technique has been proposed in this work. The extraction of system parameters is performed by using the mathematical model developed along with a genetic algorithm implemented in MATLAB. The technique yields good extraction results with reasonable error. It uses simple mathematical operation which makes the extraction fast and computationally simple when compared to other existing techniques such as traditional two step dedicated approach, Nonlinear Solver (NLS) approach, etc. It employs frequency domain analysis of low frequency input and output signals, over cumbersome time domain computations. Thus a test method, including detailed behavioral modeling of the transceiver, appropriate test signal design along with a simple algorithm for extraction is presented.
ContributorsSreenivassan, Aiswariya (Author) / Ozev, Sule (Thesis advisor) / Kiaei, Sayfe (Committee member) / Bakkaloglu, Bertan (Committee member) / Arizona State University (Publisher)
Created2011
Description
The partially-depleted (PD) silicon Metal Semiconductor Field Effect Transistor (MESFET) is becoming more and more attractive for analog and RF applications due to its high breakdown voltage. Compared to conventional CMOS high voltage transistors, the silicon MESFET can be fabricated in commercial standard Silicon-on-Insulator (SOI) CMOS foundries without any change to the process. The transition frequency of the device is demonstrated to be 45GHz, which makes the MESFET suitable for applications in high power RF power amplifier designs. Also, high breakdown voltage and low turn-on resistance make it the ideal choice for switches in the switching regulator designs. One of the anticipated applications of the MESFET is for the pass device for a low dropout linear regulator. Conventional NMOS and PMOS linear regulators suffer from high dropout voltage, low bandwidth and poor stability issues. In contrast, the N-MESFET pass transistor can provide an ultra-low dropout voltage and high bandwidth without the need for an external compensation capacitor to ensure stability. In this thesis, the design theory and problems of the conventional linear regulators are discussed. N-MESFET low dropout regulators are evaluated and characterized. The error amplifier used a folded cascode architecture with gain boosting. The source follower topology is utilized as the buffer to sink the gate leakage current from the MESFET. A shunt-feedback transistor is added to reduce the output impedance and provide the current adaptively. Measurement results show that the dropout voltage is less than 150 mV for a 1A load current at 1.8V output. Radiation measurements were done for discrete MESFET and fully integrated LDO regulators, which demonstrate their radiation tolerance ability for aerospace applications.
ContributorsChen, Bo (Author) / Thornton, Trevor (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Goryll, Michael (Committee member) / Arizona State University (Publisher)
Created2013
Description
ABSTRACT Ongoing research into wireless transceivers in the 60 GHz band is required to address the demand for high data rate communications systems at a frequency where signal propagation is challenging even over short ranges. This thesis proposes a mixer architecture in Complementary Metal Oxide Semiconductor (CMOS) technology that uses a voltage controlled oscillator (VCO) operating at a fractional multiple of the desired output signal. The proposed topology is different from conventional subharmonic mixing in that the oscillator phase generation circuitry usually required for such a circuit is unnecessary. Analysis and simulations are performed on the proposed mixer circuit in an IBM 90 nm RF process on a 1.2 V supply. A typical RF transmitter system is considered in determining the block requirements needed for the mixer to meet the IEEE 802.11ad 60 GHz Draft Physical Layer Specification. The proposed circuit has a conversion loss of 21 dB at 60 GHz with a 5 dBm LO power at 20 GHz. Input-referred third-order intercept point (IIP3) is 2.93 dBm. The gain and linearity of the proposed mixer are sufficient for Orthogonal Frequency Division Multiplexing (OFDM) modulation at 60 GHz with a transmitted data rate of over 4 Gbps.
ContributorsMartino, Todd Jeffrey (Author) / Kiaei, Sayfe (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Aberle, James T., 1961- (Committee member) / Arizona State University (Publisher)
Created2010
Description
The constant scaling of supply voltages in state-of-the-art CMOS processes has led to severe limitations for many analog circuit applications. Some CMOS processes have addressed this issue by adding high voltage MOSFETs to their process. Although it can be a completely viable solution, it usually requires a changing of the process flow or adding additional steps, which in turn, leads to an increase in fabrication costs. Si-MESFETs (silicon-metal-semiconductor-field-effect-transistors) from Arizona State University (ASU) on the other hand, have an inherent high voltage capability and can be added to any silicon-on-insulator (SOI) or silicon-on-sapphire (SOS) CMOS process free of cost. This has been proved at five different commercial foundries on technologies ranging from 0.5 to 0.15 μm. Another critical issue facing CMOS processes on insulated substrates is the scaling of the thin silicon channel. Consequently, the future direction of SOI/SOS CMOS transistors may trend away from partially depleted (PD) transistors and towards fully depleted (FD) devices. FD-CMOS are already being implemented in multiple applications due to their very low power capability. Since the FD-CMOS market only figures to grow, it is appropriate that MESFETs also be developed for these processes. The beginning of this thesis will focus on the device aspects of both PD and FD-MESFETs including their layout structure, DC and RF characteristics, and breakdown voltage. The second half will then shift the focus towards implementing both types of MESFETs in an analog circuit application. Aside from their high breakdown ability, MESFETs also feature depletion mode operation, easy to adjust but well controlled threshold voltages, and fT's up to 45 GHz. Those unique characteristics can allow certain designs that were previously difficult to implement or prohibitively expensive using conventional technologies to now be achieved. One such application which benefits is low dropout regulators (LDO). By utilizing an n-channel MESFET as the pass transistor, a LDO featuring very low dropout voltage, fast transient response, and stable operation can be achieved without an external capacitance. With the focus of this thesis being MESFET based LDOs, the device discussion will be mostly tailored towards optimally designing MESFETs for this particular application.
ContributorsLepkowski, William (Author) / Thornton, Trevor (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Goryll, Michael (Committee member) / Ayyanar, Raja (Committee member) / Arizona State University (Publisher)
Created2010
Description
Woodland/Alloy Casting, Inc. is an aluminum foundry known for providing high-quality molds to their customers in industries such as aviation, electrical, defense, and nuclear power. However, as the company has grown larger during the past three years, they have begun to struggle with the on-time delivery of their orders. Woodland prides itself on their high-grade process that includes core processing, the molding process, cleaning process, and heat-treat process. To create each mold, it has to flow through each part of the system flawlessly. Throughout this process, significant bottlenecks occur that limit the number of molds leaving the system. To combat this issue, this project uses a simulation of the foundry to test how best to schedule their work to optimize the use of their resources. Simulation can be an effective tool when testing for improvements in systems where making changes to the physical system is too expensive. ARENA is a simulation tool that allows for manipulation of resources and process while also allowing both random and selected schedules to be run through the foundry’s production process. By using an ARENA simulation to test different scheduling techniques, the risk of missing production runs is minimized during the experimental period so that many different options can be tested to see how they will affect the production line. In this project, several feasible scheduling techniques are compared in simulation to determine which schedules allow for the highest number of molds to be completed.
ContributorsAdams, Danielle Renee (Author) / Pavlic, Theodore (Thesis director) / Montgomery, Douglas (Committee member) / Industrial, Systems & Operations Engineering Prgm (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Based on findings of previous studies, there was speculation that two well-known experimental design software packages, JMP and Design Expert, produced varying power outputs given the same design and user inputs. For context and scope, another popular experimental design software package, Minitab® Statistical Software version 17, was added to the comparison. The study compared multiple test cases run on the three software packages with a focus on 2k and 3K factorial design and adjusting the standard deviation effect size, number of categorical factors, levels, number of factors, and replicates. All six cases were run on all three programs and were attempted to be run at one, two, and three replicates each. There was an issue at the one replicate stage, however—Minitab does not allow for only one replicate full factorial designs and Design Expert will not provide power outputs for only one replicate unless there are three or more factors. From the analysis of these results, it was concluded that the differences between JMP 13 and Design Expert 10 were well within the margin of error and likely caused by rounding. The differences between JMP 13, Design Expert 10, and Minitab 17 on the other hand indicated a fundamental difference in the way Minitab addressed power calculation compared to the latest versions of JMP and Design Expert. This was found to be likely a cause of Minitab’s dummy variable coding as its default instead of the orthogonal coding default of the other two. Although dummy variable and orthogonal coding for factorial designs do not show a difference in results, the methods affect the overall power calculations. All three programs can be adjusted to use either method of coding, but the exact instructions for how are difficult to find and thus a follow-up guide on changing the coding for factorial variables would improve this issue.
ContributorsArmstrong, Julia Robin (Author) / McCarville, Daniel R. (Thesis director) / Montgomery, Douglas (Committee member) / Industrial, Systems (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Reliability growth is not a new topic in either engineering or statistics and has been a major focus for the past few decades. The increasing level of high-tech complex systems and interconnected components and systems implies that reliability problems will continue to exist and may require more complex solutions. The most heavily used experimental designs in assessing and predicting a systems reliability are the "classical designs", such as full factorial designs, fractional factorial designs, and Latin square designs. They are so heavily used because they are optimal in their own right and have served superbly well in providing efficient insight into the underlying structure of industrial processes. However, cases do arise when the classical designs do not cover a particular practical situation. Repairable systems are such a case in that they usually have limitations on the maximum number of runs or too many varying levels for factors. This research explores the D-optimal design criteria as it applies to the Poisson Regression model on repairable systems, with a number of independent variables and under varying assumptions, to include the total time tested at a specific design point with fixed parameters, the use of a Bayesian approach with unknown parameters, and how the design region affects the optimal design. In applying experimental design to these complex repairable systems, one may discover interactions between stressors and provide better failure data. Our novel approach of accounting for time and the design space in the early stages of testing of repairable systems should, theoretically, in the final engineering design improve the system's reliability, maintainability and availability.
ContributorsTAYLOR, DUSTIN (Author) / Montgomery, Douglas (Thesis advisor) / Pan, Rong (Thesis advisor) / Rigdon, Steve (Committee member) / Freeman, Laura (Committee member) / Iquebal, Ashif (Committee member) / Arizona State University (Publisher)
Created2023
Description
Nonregular designs for 9-14 factors in 16 runs are a vital alternative for to theregular minimum aberration resolution III fractional factorials. Because there is no complete aliasing between the main factor and two factor interactions, these designs are useful as potential confusion in results is avoided. However, there is another associated complication to this kind of design due to the complete confounding for some of the two- factors. In this research, the focus is on using three different of methods and compare the results. The methods are: Stepwise, least absolute shrinkage and selection operator (LASSO) and the Dantzig selector method. In a previous research, Metcalfe discuss the nonregular designs for 6-8 factors design and studies several analysis methods. She also develops a new method, The Aliased Informed Model Selection (AIMS), for those designs. This research builds upon that.
For this research, simulation is used to develop random models to analyze designs from the class of nonregular fractions with 9 – 14 factors in 16 runs using JMP scripting. Then, analyze the cases with the mentioned methods and find the success rate for each one. The model generations were random with only main factors, or main factors and two- factors interaction as active effects. Effect sizes of 2 and 3 standard deviations are studied. The nonregular design used in this research are 9 and 11-factors design.
Results shows that there is a clear consistency for the main factors only as active effects using all the methods. However, adding the interactions to the active effects degrade the success rate substantially for the Dantzig method. Moreover, as the active effects exceed approximately half of the degrees of freedom for the design the performance for all
i
the methods decreases. Finally, some recommendations are discussed for further research investigation such as AIMS, other variation methods and Augmentation.
ContributorsAlqarni, Hanan (Author) / Montgomery, Douglas (Thesis advisor) / Metcalfe, Carly (Committee member) / Pedrielli, Giulia (Committee member) / Arizona State University (Publisher)
Created2022
Description
Matching or stratification is commonly used in observational studies to remove bias due to confounding variables. Analyzing matched data sets requires specific methods which handle dependency among observations within a stratum. Also, modern studies often include hundreds or thousands of variables. Traditional methods for matched data sets are challenged in high-dimensional settings, mixed type variables (numerical and categorical), nonlinear andinteraction effects. Furthermore, machine learning research for such structured data is quite limited. This dissertation addresses this important gap and proposes machine learning models for identifying informative variables from high-dimensional matched data sets. The first part of this dissertation proposes a machine learning model to identify informative variables from high-dimensional matched case-control data sets. The outcome of interest in this study design is binary (case or control), and each stratum is assumed to have one unit from each outcome level. The proposed method which is referred to as Matched Forest (MF) is effective for large number of variables and identifying interaction effects. The second part of this dissertation proposes three enhancements of MF algorithm. First, a regularization framework is proposed to improve variable selection performance in excessively high-dimensional settings. Second, a classification method is proposed to classify unlabeled pairs of data. Third, two metrics are proposed to estimate the effects of important variables identified by MF. The third part proposes a machine learning model based on Neural Networks to identify important variables from a more generalized matched case-control data set where each stratum has one unit from case outcome level and more than one unit from control outcome level. This method which is referred to as Matched Neural Network (MNN) performs better than current algorithms to identify variables with interaction effects. Lastly, a generalized machine learning model is proposed to identify informative variables from high-dimensional matched data sets where the outcome has more than two levels. This method outperforms existing algorithms in the literature in identifying variables with complex nonlinear and interaction effects.
ContributorsShomal Zadeh, Nooshin (Author) / Runger, George (Thesis advisor) / Montgomery, Douglas (Committee member) / Shinde, Shilpa (Committee member) / Escobedo, Adolfo (Committee member) / Arizona State University (Publisher)
Created2021