Matching Items (45)
Filtering by
- All Subjects: engineering
- All Subjects: Heat Transfer
- Creators: Phelan, Patrick
- Creators: Engineering Programs
Description
In this thesis the performance of a Hybrid AC System (HACS) is modeled and optimized. The HACS utilizes solar photovoltaic (PV) panels to help reduce the demand from the utility during peak hours. The system also includes an ice Thermal Energy Storage (TES) tank to accumulate cooling energy during off-peak hours. The AC runs continuously on grid power during off-peak hours to generate cooling for the house and to store thermal energy in the TES. During peak hours, the AC runs on the power supplied from the PV, and cools the house along with the energy stored in the TES. A higher initial cost is expected due to the additional components of the HACS (PV and TES), but a lower operational cost due to higher energy efficiency, energy storage and renewable energy utilization. A house cooled by the HACS will require a smaller size AC unit (about 48% less in the rated capacity), compared to a conventional AC system. To compare the cost effectiveness of the HACS with a regular AC system, time-of-use (TOU) utility rates are considered, as well as the cost of the system components and the annual maintenance. The model shows that the HACS pays back its initial cost of $28k in about 6 years with an 8% APR, and saves about $45k in total cost when compared to a regular AC system that cools the same house for the same period of 6 years.
ContributorsJubran, Sadiq (Author) / Phelan, Patrick (Thesis advisor) / Calhoun, Ronald (Committee member) / Trimble, Steve (Committee member) / Arizona State University (Publisher)
Created2011
Description
As the demand for power increases in populated areas, so will the demand for water. Current power plant technology relies heavily on the Rankine cycle in coal, nuclear and solar thermal power systems which ultimately use condensers to cool the steam in the system. In dry climates, the amount of water to cool off the condenser can be extremely large. Current wet cooling technologies such as cooling towers lose water from evaporation. One alternative to prevent this would be to implement a radiative cooling system. More specifically, a system that utilizes the volumetric radiation emission from water to the night sky could be implemented. This thesis analyzes the validity of a radiative cooling system that uses direct radiant emission to cool water. A brief study on potential infrared transparent cover materials such as polyethylene (PE) and polyvinyl carbonate (PVC) was performed. Also, two different experiments to determine the cooling power from radiation were developed and run. The results showed a minimum cooling power of 33.7 W/m2 for a vacuum insulated glass system and 37.57 W/m2 for a tray system with a maximum of 98.61 Wm-2 at a point when conduction and convection heat fluxes were considered to be zero. The results also showed that PE proved to be the best cover material. The minimum numerical results compared well with other studies performed in the field using similar techniques and materials. The results show that a radiative cooling system for a power plant could be feasible given that the cover material selection is narrowed down, an ample amount of land is available and an economic analysis is performed proving it to be cost competitive with conventional systems.
ContributorsOvermann, William (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Taylor, Robert (Committee member) / Arizona State University (Publisher)
Created2011
Description
The ability to shift the photovoltaic (PV) power curve and make the energy accessible during peak hours can be accomplished through pairing solar PV with energy storage technologies. A prototype hybrid air conditioning system (HACS), built under supervision of project head Patrick Phelan, consists of PV modules running a DC compressor that operates a conventional HVAC system paired with a second evaporator submerged within a thermal storage tank. The thermal storage is a 0.284m3 or 75 gallon freezer filled with Cryogel balls, submerged in a weak glycol solution. It is paired with its own separate air handler, circulating the glycol solution. The refrigerant flow is controlled by solenoid valves that are electrically connected to a high and low temperature thermostat. During daylight hours, the PV modules run the DC compressor. The refrigerant flow is directed to the conventional HVAC air handler when cooling is needed. Once the desired room temperature is met, refrigerant flow is diverted to the thermal storage, storing excess PV power. During peak energy demand hours, the system uses only small amounts of grid power to pump the glycol solution through the air handler (note the compressor is off), allowing for money and energy savings. The conventional HVAC unit can be scaled down, since during times of large cooling demands the glycol air handler can be operated in parallel with the conventional HVAC unit. Four major test scenarios were drawn up in order to fully comprehend the performance characteristics of the HACS. Upon initial running of the system, ice was produced and the thermal storage was charged. A simple test run consisting of discharging the thermal storage, initially ~¼ frozen, was performed. The glycol air handler ran for 6 hours and the initial cooling power was 4.5 kW. This initial test was significant, since greater than 3.5 kW of cooling power was produced for 3 hours, thus demonstrating the concept of energy storage and recovery.
ContributorsPeyton-Levine, Tobin (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Wang, Robert (Committee member) / Arizona State University (Publisher)
Created2012
Description
This study analyzes the thermoelectric phenomena of nanoparticle suspensions, which are composed of liquid and solid nanoparticles that show a relatively stable Seebeck coefficient as bulk solids near room temperature. The approach is to explore the thermoelectric character of the nanoparticle suspensions, predict the outcome of the experiment and compare the experimental data with anticipated results. In the experiment, the nanoparticle suspension is contained in a 15cm*2.5cm*2.5cm glass container, the temperature gradient ranges from 20 °C to 60 °C, and room temperature fluctuates from 20 °C to 23°C. The measured nanoparticles include multiwall carbon nanotubes, aluminum dioxide and bismuth telluride. A temperature gradient from 20 °C to 60 °C is imposed along the length of the container, and the resulting voltage (if any) is measured. Both heating and cooling processes are measured. With three different nanoparticle suspensions (carbon nano tubes, Al2O3 nanoparticles and Bi2Te3 nanoparticles), the correlation between temperature gradient and voltage is correspondingly 8%, 38% and 96%. A comparison of results calculated from the bulk Seebeck coefficients with our measured results indicate that the Seebeck coefficient measured for each suspension is much more than anticipated, which indicates that the thermophoresis effect could have enhanced the voltage. Further research with a closed-loop system might be able to affirm the results of this study.
ContributorsZhu, Moxuan (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Prasher, Ravi (Committee member) / Arizona State University (Publisher)
Created2010
Description
Phase Change Material (PCM) plays an important role as a thermal energy storage device by utilizing its high storage density and latent heat property. One of the potential applications for PCM is in buildings by incorporating them in the envelope for energy conservation. During the summer season, the benefits are a decrease in overall energy consumption by the air conditioning unit and a time shift in peak load during the day. Experimental work was carried out by Arizona Public Service (APS) in collaboration with Phase Change Energy Solutions (PCES) Inc. with a new class of organic-based PCM. This "BioPCM" has non-flammable properties and can be safely used in buildings. The experimental setup showed maximum energy savings of about 30%, a maximum peak load shift of ~ 60 min, and maximum cost savings of about 30%. Simulation was performed to validate the experimental results. EnergyPlus was chosen as it has the capability to simulate phase change material in the building envelope. The building material properties were chosen from the ASHRAE Handbook - Fundamentals and the HVAC system used was a window-mounted heat pump. The weather file used in the simulation was customized for the year 2008 from the National Renewable Energy Laboratory (NREL) website. All EnergyPlus inputs were ensured to match closely with the experimental parameters. The simulation results yielded comparable trends with the experimental energy consumption values, however time shifts were not observed. Several other parametric studies like varying PCM thermal conductivity, temperature range, location, insulation R-value and combination of different PCMs were analyzed and results are presented. It was found that a PCM with a melting point from 23 to 27 °C led to maximum energy savings and greater peak load time shift duration, and is more suitable than other PCM temperature ranges for light weight building construction in Phoenix.
ContributorsMuruganantham, Karthik (Author) / Phelan, Patrick (Thesis advisor) / Reddy, Agami (Committee member) / Lee, Taewoo (Committee member) / Arizona State University (Publisher)
Created2010
Description
This thesis presents a kit of materials intended to present students with a glimpse of what engineering entails by guiding them through building engineering projects similar to what is in the real world. The objective of this project is to pique the interest of children by introducing them to lesser known engineering related topics, and increasing their literacy of terms and methods engineers use to solve problems. The effectiveness of the kit’s content and teaching methods was tested in a classroom of 6th graders and was measured using the responses from surveys handed out. I found that kit did in fact positively lead to a change in the way the students perceived engineering, and it taught students about new engineering related topics. Students were capable of completing difficult tasks of wiring and coding successfully through the use of detailed instruction. However, the instructions were seen in two opposing views of either being too overwhelming or more guidance was necessary.
ContributorsQuezada, Hebellyn Arleth (Author) / Aukes, Daniel (Thesis director) / Kellam, Nadia (Committee member) / Engineering Programs (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The relationship between video games and education is something that has been studied extensively in academia. Based upon these studies a new concept was created, gamification. Gamification is the next step in video game research to analyze why video games enhance learning. The interest and research into this concept have developed so much so that it has become its own topic area for research. This study is looking to analyze the effect that gamification has on not only learning, but also self-efficacy. Through a choose your own adventure game, the knowledge and self-efficacy of participants will be examined to observe the differences when learning difficult engineering concepts with and without gamification. It is expected that participants that experienced training through gamification will demonstrate deeper learning and higher self-efficacy than trained through a video. Furthermore, it is anticipated that some video trained participants’ self-efficacy will increase; however, their comprehension will be less than participants trained through gamification. The results of this study can help promote the interest in researching gamification and education, while influencing educators to corporate gamification elements when designing their courses. Moreover, this study continued through adaptation and integration into a statics forces class, investigated if the same results can be found within a classroom setting.
ContributorsKanechika, Amber (Author) / Craig, Scotty (Thesis director) / Roscoe, Rod (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The purpose of this study is to spark a discussion for engineers and their firms to consider the impact of border barriers on wildlife. The focus of this study is to consider if or how engineers make those considerations, such as through design modifications. Barriers block wildlife migration patterns, disabling them from life-sustaining resources. This is particularly important due to an increasing trend in habitat loss, urban development, and climate change. During literature analysis of border barrier impacts, and outreaching to relevant organizations and individuals, there was little to no public documentation or discussion from the engineering community found. Discussion that was found is included in this study, but the lack of connection between conservation and engineering professionals is eminently profound. Therefore, the analysis of studying engineering design considerations additionally studied the relationship between environmental and engineering professionals. Types of research included involves literature analysis of journal articles, reports, project plans for construction, and environmental laws pertinent to wildlife impact.
ContributorsMcMillin, Kaci (Author) / Karwat, Darshan (Thesis director) / Senko, Jesse (Committee member) / Engineering Programs (Contributor) / Environmental and Resource Management (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
This creative project is a children’s book designed to teach young readers about engineering through a fictional story about a group of children creating a robot for their school’s show-and-tell. The story aims to teach engineering principles to children in a lighthearted and entertaining form, narrating notions such as the design process, prototyping, specialty fields, and repurposing. Other principles such as learning patience, compromise and teamwork are also conveyed throughout the plot details. Small life lessons that transcend the realm of engineering are also embodied throughout. The plot of the story is a young girl who goes to visit her grandfather who is a garage tinkerer with a love of spare parts. He tells her about his job as a robotics engineer, and she loves it. She goes and tells her friends who decide they want to make a robot for show-and-tell at school. The grandfather agrees to help them build a robot and thus the group of kids are walked through the engineering design process, learning new things (and specialization) along the way. The story ends by revealing that the whole story was a flashback the main character was having as she is about to start her first day at an engineering firm.
ContributorsReed, Shelby Marie (Author) / Oberle, Eric (Thesis director) / Williams, Wendy (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
With the ongoing development of simulation technology, classic barriers to social interactions are beginning to be dismantled. One such exchange is encapsulated within education—instructors can use simulations to make difficult topics more manageable and accessible to students. Within simulations that include virtual humans, however, there are important factors to consider. Participants playing in virtual environments will act in a way that is consistent with their real-world behaviors—including their implicit biases. The current study seeks to determine the impact of virtual humans’ skin tone on participants’ behaviors when applying engineering concepts to simulated projects. Within a comparable study focused on a medical training simulation, significantly more errors and delays were made when working for the benefit of dark-skinned patients in a virtual context. In the current study, participants were given a choose-your-own-adventure style game in which they constructed simulated bridges for either a light- ordark-skinned community, and the number of errors and time taken for each decision was tracked. Results are expected to be consistent with previous study, indicating a higher number of errors and less time taken for each decision, although these results may be attenuated by a
lack of time pressure and urgency to the given situations. If these expected results hold, there may be implications for both undergraduate engineering curriculum and real-world engineering endeavors.
lack of time pressure and urgency to the given situations. If these expected results hold, there may be implications for both undergraduate engineering curriculum and real-world engineering endeavors.
ContributorsEldemire, Kate (Author) / Craig, Scotty D. (Thesis director) / Roscoe, Rod D. (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05