Matching Items (42)
Filtering by
- All Subjects: engineering
- All Subjects: Creative Project
- Creators: Phelan, Patrick
- Creators: W. P. Carey School of Business
Description
An eco-industrial park (EIP) is an industrial ecosystem in which a group of co-located firms are involved in collective resource optimization with each other and with the local community through physical exchanges of energy, water, materials, byproducts and services - referenced in the industrial ecology literature as "industrial symbiosis". EIPs, when compared with standard industrial resource sharing networks, prove to be of greater public advantage as they offer improved environmental and economic benefits, and higher operational efficiencies both upstream and downstream in their supply chain.
Although there have been many attempts to adapt EIP methodology to existing industrial sharing networks, most of them have failed for various factors: geographic restrictions by governmental organizations on use of technology, cost of technology, the inability of industries to effectively communicate their upstream and downstream resource usage, and to diminishing natural resources such as water, land and non-renewable energy (NRE) sources for energy production.
This paper presents a feasibility study conducted to evaluate the comparative environmental, economic, and geographic impacts arising from the use of renewable energy (RE) and NRE to power EIPs. Life Cycle Assessment (LCA) methodology, which is used in a variety of sectors to evaluate the environmental merits and demerits of different kinds of products and processes, was employed for comparison between these two energy production methods based on factors such as greenhouse gas emission, acidification potential, eutrophication potential, human toxicity potential, fresh water usage and land usage. To complement the environmental LCA analysis, levelized cost of electricity was used to evaluate the economic impact. This model was analyzed for two different geographic locations; United States and Europe, for 12 different energy production technologies.
The outcome of this study points out the environmental, economic and geographic superiority of one energy source over the other, including the total carbon dioxide equivalent emissions, which can then be related to the total number of carbon credits that can be earned or used to mitigate the overall carbon emission and move closer towards a net zero carbon footprint goal thus making the EIPs truly sustainable.
Although there have been many attempts to adapt EIP methodology to existing industrial sharing networks, most of them have failed for various factors: geographic restrictions by governmental organizations on use of technology, cost of technology, the inability of industries to effectively communicate their upstream and downstream resource usage, and to diminishing natural resources such as water, land and non-renewable energy (NRE) sources for energy production.
This paper presents a feasibility study conducted to evaluate the comparative environmental, economic, and geographic impacts arising from the use of renewable energy (RE) and NRE to power EIPs. Life Cycle Assessment (LCA) methodology, which is used in a variety of sectors to evaluate the environmental merits and demerits of different kinds of products and processes, was employed for comparison between these two energy production methods based on factors such as greenhouse gas emission, acidification potential, eutrophication potential, human toxicity potential, fresh water usage and land usage. To complement the environmental LCA analysis, levelized cost of electricity was used to evaluate the economic impact. This model was analyzed for two different geographic locations; United States and Europe, for 12 different energy production technologies.
The outcome of this study points out the environmental, economic and geographic superiority of one energy source over the other, including the total carbon dioxide equivalent emissions, which can then be related to the total number of carbon credits that can be earned or used to mitigate the overall carbon emission and move closer towards a net zero carbon footprint goal thus making the EIPs truly sustainable.
ContributorsGupta, Vaibhav (Author) / Calhoun, Ronald J (Thesis advisor) / Dooley, Kevin (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2014
Description
As the demand for power increases in populated areas, so will the demand for water. Current power plant technology relies heavily on the Rankine cycle in coal, nuclear and solar thermal power systems which ultimately use condensers to cool the steam in the system. In dry climates, the amount of water to cool off the condenser can be extremely large. Current wet cooling technologies such as cooling towers lose water from evaporation. One alternative to prevent this would be to implement a radiative cooling system. More specifically, a system that utilizes the volumetric radiation emission from water to the night sky could be implemented. This thesis analyzes the validity of a radiative cooling system that uses direct radiant emission to cool water. A brief study on potential infrared transparent cover materials such as polyethylene (PE) and polyvinyl carbonate (PVC) was performed. Also, two different experiments to determine the cooling power from radiation were developed and run. The results showed a minimum cooling power of 33.7 W/m2 for a vacuum insulated glass system and 37.57 W/m2 for a tray system with a maximum of 98.61 Wm-2 at a point when conduction and convection heat fluxes were considered to be zero. The results also showed that PE proved to be the best cover material. The minimum numerical results compared well with other studies performed in the field using similar techniques and materials. The results show that a radiative cooling system for a power plant could be feasible given that the cover material selection is narrowed down, an ample amount of land is available and an economic analysis is performed proving it to be cost competitive with conventional systems.
ContributorsOvermann, William (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Taylor, Robert (Committee member) / Arizona State University (Publisher)
Created2011
Description
In this thesis the performance of a Hybrid AC System (HACS) is modeled and optimized. The HACS utilizes solar photovoltaic (PV) panels to help reduce the demand from the utility during peak hours. The system also includes an ice Thermal Energy Storage (TES) tank to accumulate cooling energy during off-peak hours. The AC runs continuously on grid power during off-peak hours to generate cooling for the house and to store thermal energy in the TES. During peak hours, the AC runs on the power supplied from the PV, and cools the house along with the energy stored in the TES. A higher initial cost is expected due to the additional components of the HACS (PV and TES), but a lower operational cost due to higher energy efficiency, energy storage and renewable energy utilization. A house cooled by the HACS will require a smaller size AC unit (about 48% less in the rated capacity), compared to a conventional AC system. To compare the cost effectiveness of the HACS with a regular AC system, time-of-use (TOU) utility rates are considered, as well as the cost of the system components and the annual maintenance. The model shows that the HACS pays back its initial cost of $28k in about 6 years with an 8% APR, and saves about $45k in total cost when compared to a regular AC system that cools the same house for the same period of 6 years.
ContributorsJubran, Sadiq (Author) / Phelan, Patrick (Thesis advisor) / Calhoun, Ronald (Committee member) / Trimble, Steve (Committee member) / Arizona State University (Publisher)
Created2011
Description
The ability to shift the photovoltaic (PV) power curve and make the energy accessible during peak hours can be accomplished through pairing solar PV with energy storage technologies. A prototype hybrid air conditioning system (HACS), built under supervision of project head Patrick Phelan, consists of PV modules running a DC compressor that operates a conventional HVAC system paired with a second evaporator submerged within a thermal storage tank. The thermal storage is a 0.284m3 or 75 gallon freezer filled with Cryogel balls, submerged in a weak glycol solution. It is paired with its own separate air handler, circulating the glycol solution. The refrigerant flow is controlled by solenoid valves that are electrically connected to a high and low temperature thermostat. During daylight hours, the PV modules run the DC compressor. The refrigerant flow is directed to the conventional HVAC air handler when cooling is needed. Once the desired room temperature is met, refrigerant flow is diverted to the thermal storage, storing excess PV power. During peak energy demand hours, the system uses only small amounts of grid power to pump the glycol solution through the air handler (note the compressor is off), allowing for money and energy savings. The conventional HVAC unit can be scaled down, since during times of large cooling demands the glycol air handler can be operated in parallel with the conventional HVAC unit. Four major test scenarios were drawn up in order to fully comprehend the performance characteristics of the HACS. Upon initial running of the system, ice was produced and the thermal storage was charged. A simple test run consisting of discharging the thermal storage, initially ~¼ frozen, was performed. The glycol air handler ran for 6 hours and the initial cooling power was 4.5 kW. This initial test was significant, since greater than 3.5 kW of cooling power was produced for 3 hours, thus demonstrating the concept of energy storage and recovery.
ContributorsPeyton-Levine, Tobin (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Wang, Robert (Committee member) / Arizona State University (Publisher)
Created2012
Description
Buildings continue to take up a significant portion of the global energy consumption, meaning there are significant research opportunities in reducing the energy consumption of the building sector. One widely studied area is waste heat recovery. The purpose of this research is to test a prototype thermogalvanic cell in the form factor of a UK metric brick sized at 215 mm × 102.5 mm × 65 mm for the experimental power output using a copper/copper(II) (Cu/Cu2+) based aqueous electrode. In this study the thermogalvanic brick uses a 0.7 M CuSO4 + 0.1 M H2SO4 aqueous electrolyte with copper electrodes as two of the walls. The other walls of the thermogalvanic brick are made of 5.588 mm (0.22 in) thick acrylic sheet. Internal to the brick, a 0.2 volume fraction minimal surface Schwartz diamond (Schwartz D) structure made of ABS, Polycarbonate-ABS (PCABS), and Polycarbonate-Carbon Fiber (PCCF) was tested to see the effects on the power output of the thermogalvanic brick. By changing the size of the thermogalvanic cell into that of a brick will allow this thermogalvanic cell to become the literal building blocks of green buildings. The thermogalvanic brick was tested by applying a constant power to the strip heater attached to the hot side of the brick, resulting in various ∆T values between 8◦C and 15◦C depending on the material of Schwartz D inside. From this, it was found that a single Cu/Cu2+ thermogalvanic brick containing the PCCF or PCABS Schwartz D performed equivalently well at a 163.8% or 164.9%, respectively, higher normalized power density output than the control brick containing only electrolyte solution.
ContributorsLee, William J. (Author) / Phelan, Patrick (Thesis advisor) / El Asmar, Mounir (Committee member) / Milcarek, Ryan (Committee member) / Arizona State University (Publisher)
Created2018
Description
Fringe: Abstract Fringe is a feature length screenplay and a work of original science fiction. The story takes place in the future, on a planet far from Earth but it is told from the human perspective and is meant to draw into question many issues present in society today: prejudice, hatred, multiculturalism, war, and social division. The screenplay seeks to pose an allegorical relationship between the humanity living on the planet, and the enemies they face, and the present day conflict between America and the Middle East or ISIS. The story follows Miles as he is forced to ally with his sworn enemy, the Lue, and learn to fight together to save his world from destruction. Miles begins the film bitter, resentful, and filled with prejudice towards his foes, much like a majority of Americans today. Instead of focussing on that conflict though, my story unites these two bitter enemies and asks them to put aside their violent and hateful pasts to fight a new, more powerful foe together. As the events unfold my characters learn that their enemies can be just like them and that they have something valuable to offer their world. My screenplay is about finding commonality with the enemy, on both sides of a conflict. By the end of my tale, Miles learns that there is good to be found in the world, even in his sworn enemies, if he looks close enough. It may seem like an archetypal plot on the surface but I worked hard to create a world that has not been seen in film before, an original science fiction universe that can bring these issues into the light and entertain an audience while doing so. I feel that my screenplay does just that, offering entertainment with and edge of social commentary, and stays true to the science fiction form.
ContributorsTrcic, Colton Walker (Author) / Maday, Gregory (Thesis director) / Bernstein, Gregory (Committee member) / WPC Graduate Programs (Contributor) / W. P. Carey School of Business (Contributor) / School of Film, Dance and Theatre (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
I saw a Dove ad called "Real Beauty Sketches" where a group of women described themselves to a sketch artist, and then a complete stranger described them to the same artist. By the end of the ad, it's apparent that the women, when describing themselves, were very critical of all their features. When total strangers described them the resulting portrait was more beautiful to the women. The take-away from the campaign was that others see more beauty in you than you do in yourself. I explored that idea through my thesis. My aim in this project was to learn to see the beauty in myself through personal artistic expression. I completed a series of self-portraits; for about four months straight I drew one portrait of myself every single day. I also recorded my thoughts in a diary entry as I drew my portrait, hoping to capture my emotions and moods during that day. The resulting outcome of my creative project is twofold. The physical outcome is about 100 self-portraits and daily diary entries that represent the creative thesis project I pursued. The second outcome cannot be physically seen. I have discovered more about myself in four months than I have in twenty years. I have begun to see myself differently, and positively. This thesis project turned into a journey of self-exploration, and I'm looking forward to what the future holds for me.
ContributorsRao, Rachana Sai (Author) / Hood, Mary (Thesis director) / Button, Melissa (Committee member) / School of Art (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The goal of this project is to gain and use knowledge of sustainability topics as a value-adding function for a business in the Tempe, AZ area and to develop the skills to approach and consult with business owners and staff about sustainable business options. Sustainability searches for a balance between society, economy and the environment where all three can thrive; therefore, the ideal project partner was a business that values the wellbeing of mankind, is locally owned and operated and promotes environmental stewardship. The Original Chop Shop Co in Tempe Arizona was appropriately selected. Throughout the duration of our partnership, I observed their daily routine, interviewed employees and managers and used the collected information to identify three areas of focus that have the largest potential to reduce The Original Chop Shop Company's impact on the environment. Information on the areas of recycling, composting, and food sourcing was researched and synthesized to make suggestions for ecofriendly changes to business practices. The scope of the project includes small changes in daily practices such as implementing a recycling and composting program and employee training sessions and minor investments such as purchasing a micro washer and silverware in order to eliminate nonrenewable plastic utensils. The scope does not include major renovations or investments in technology. The suggestions offered position The Original Chop Shop to conduct business in a way that does not compromise the health of the environment, society, or economy.
ContributorsFerry, Brianna Aislinn (Author) / Dooley, Kevin (Thesis director) / Darnall, Nicole (Committee member) / Barrett, The Honors College (Contributor) / W. P. Carey School of Business (Contributor) / School of Politics and Global Studies (Contributor)
Created2015-05
Description
Imagine, after enjoying 40 years with a person you love, and promise to live with ‘till death do us part,’ you are taxed over $360,000 upon the death of your spouse. Edith Windsor, who was legally married experienced discriminatory tax treatment simply because her spouse was a woman. On June 26, 2013 the Supreme Court of the United States ruled the Defense of Marriage Act unconstitutional violating the 5th and 14th amendment to the U.S. Constitution. The ruling eliminated this discriminatory tax policy and the conflict of filing federal and state income taxes in states recognizing same-sex marriage. It did create a new conflict with the states that do not recognize these marriages. GayTaxGuide.com is an authoritative tool to verify the current legal standing for same-sex marriage in every state of the U.S. Visitors will find links to official state tax agencies, state income tax forms including official guidance for the public in completing state income tax returns for same-sex married taxpayers. Reading the paper component of this thesis will inform you of U.S. history of taxation and same-sex marriage dating back to the 1st century. Census data and Gallup® survey results pertaining to LGBT topics are presented along with an account of my research process. This project serves the public in untangling state income tax policy for same-sex married couples with up to date primary sources in an easy to navigate format.
ContributorsQuatrone, Jeffrey John (Author) / Goldman, Donald (Thesis director) / Aviles-Santiago, Manuel (Committee member) / Barrett, The Honors College (Contributor) / W. P. Carey School of Business (Contributor)
Created2014-12
Description
Although the number of women earning college degrees and entering the workforce is increasing, a gender gap persists at top leadership positions. Women are faced with numerous challenges throughout the talent pipeline, challenges that often drive women out of the workforce. This paper looks at the power of mentoring and how women, particularly young women, have the potential to overcome these challenges through a successful mentoring relationship. We use examples of successful mentoring programs at the corporate and university level to support the development of a mentoring program at the high school level. Our paper presents the research and development process behind the Young Women in Leadership (YWiL) Workshop, a half-day event that focused on bringing awareness to the importance of mentoring and leadership at the high school level while providing young women with the confidence and knowledge to begin to establish their own mentoring relationships.
ContributorsRust, Brenna (Co-author) / Myers, Sheridan (Co-author) / Desch, Tim (Thesis director) / Kalika, Dale (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor) / School of Accountancy (Contributor) / T. Denny Sanford School of Social and Family Dynamics (Contributor) / WPC Graduate Programs (Contributor) / W. P. Carey School of Business (Contributor)
Created2015-05