Matching Items (105)
Filtering by
- All Subjects: Creative Project
- All Subjects: engineering
- Creators: Department of English
- Creators: Harrington Bioengineering Program
- Creators: Rogers, Bradley
Description
For this Creative Project, I decided to explore the elements that set novellas apart from other genres and then experiment writing in the form. In doing so, I took into account three main categories: Plot Structure, Character Development, Style/Format, and then used my findings to write 45 pages of a novella titled Emmy and Me.
ContributorsBingham, Roxanne Marie (Author) / Irish, Jennifer (Thesis director) / Danielson, Jonathan (Committee member) / Department of English (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
The object of this study was a 26 year old residential Photovoltaic (PV) monocrystalline silicon (c-Si) power plant, called Solar One, built by developer John F. Long in Phoenix, Arizona (a hot-dry field condition). The task for Arizona State University Photovoltaic Reliability Laboratory (ASU-PRL) graduate students was to evaluate the power plant through visual inspection, electrical performance, and infrared thermography. The purpose of this evaluation was to measure and understand the extent of degradation to the system along with the identification of the failure modes in this hot-dry climatic condition. This 4000 module bipolar system was originally installed with a 200 kW DC output of PV array (17 degree fixed tilt) and an AC output of 175 kVA. The system was shown to degrade approximately at a rate of 2.3% per year with no apparent potential induced degradation (PID) effect. The power plant is made of two arrays, the north array and the south array. Due to a limited time frame to execute this large project, this work was performed by two masters students (Jonathan Belmont and Kolapo Olakonu) and the test results are presented in two masters theses. This thesis presents the results obtained on the north array and the other thesis presents the results obtained on the south array. The resulting study showed that PV module design, array configuration, vandalism, installation methods and Arizona environmental conditions have had an effect on this system's longevity and reliability. Ultimately, encapsulation browning, higher series resistance (potentially due to solder bond fatigue) and non-cell interconnect ribbon breakages outside the modules were determined to be the primary causes for the power loss.
ContributorsBelmont, Jonathan (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Henderson, Mark (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2013
Description
While the piezoelectric effect has been around for some time, it has only recently caught interest as a potential sustainable energy harvesting device. Piezoelectric energy harvesting has been developed for shoes and panels, but has yet to be integrated into a marketable bicycle tire. For this thesis, the development and feasibility of a piezoelectric tire was done. This includes the development of a circuit that incorporates piezoceramic elements, energy harvesting circuitry, and an energy storage device. A single phase circuit was designed using an ac-dc diode rectifier. An electrolytic capacitor was used as the energy storage device. A financial feasibility was also done to determine targets for manufacturing cost and sales price. These models take into account market trends for high performance tires, economies of scale, and the possibility of government subsidies. This research will help understand the potential for the marketability of a piezoelectric energy harvesting tire that can create electricity for remote use. This study found that there are many obstacles that must be addressed before a piezoelectric tire can be marketed to the general public. The power output of this device is miniscule compared to an alkaline battery. In order for this device to approach the power output of an alkaline battery the weight of the device would also become an issue. Additionally this device is very costly compared to the average bicycle tire. Lastly, this device is extreme fragile and easily broken. In order for this device to become marketable the issues of power output, cost, weight, and durability must all be successfully overcome.
ContributorsMalotte, Christopher (Author) / Madakannan, Arunachalanadar (Thesis advisor) / Srinivasan, Devarajan (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2012
Description
Potential induced degradation (PID) due to high system voltages is one of the major degradation mechanisms in photovoltaic (PV) modules, adversely affecting their performance due to the combined effects of the following factors: system voltage, superstrate/glass surface conductivity, encapsulant conductivity, silicon nitride anti-reflection coating property and interface property (glass/encapsulant; encapsulant/cell; encapsulant/backsheet). Previous studies carried out at ASU's Photovoltaic Reliability Laboratory (ASU-PRL) showed that only negative voltage bias (positive grounded systems) adversely affects the performance of commonly available crystalline silicon modules. In previous studies, the surface conductivity of the glass surface was obtained using either conductive carbon layer extending from the glass surface to the frame or humidity inside an environmental chamber. This thesis investigates the influence of glass surface conductivity disruption on PV modules. In this study, conductive carbon was applied only on the module's glass surface without extending to the frame and the surface conductivity was disrupted (no carbon layer) at 2cm distance from the periphery of frame inner edges. This study was carried out under dry heat at two different temperatures (60 °C and 85 °C) and three different negative bias voltages (-300V, -400V, and -600V). To replicate closeness to the field conditions, half of the selected modules were pre-stressed under damp heat for 1000 hours (DH 1000) and the remaining half under 200 hours of thermal cycling (TC 200). When the surface continuity was disrupted by maintaining a 2 cm gap from the frame to the edge of the conductive layer, as demonstrated in this study, the degradation was found to be absent or negligibly small even after 35 hours of negative bias at elevated temperatures. This preliminary study appears to indicate that the modules could become immune to PID losses if the continuity of the glass surface conductivity is disrupted at the inside boundary of the frame. The surface conductivity of the glass, due to water layer formation in a humid condition, close to the frame could be disrupted just by applying a water repelling (hydrophobic) but high transmittance surface coating (such as Teflon) or modifying the frame/glass edges with water repellent properties.
ContributorsTatapudi, Sai Ravi Vasista (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Srinivasan, Devarajan (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2012
Description
This report presents the effects and analysis of the effects of Pulsed-Gas Metal Arc Welding's (P-GMAW) on Lean Duplex stainless steel. Although the welding of Duplex and Super Duplex Stainless steels have been well documented in both the laboratory and construction industry, the use of Lean Duplex has not. The purpose for conducting this research is to ensure that the correct Ferrite-Austenite phase balance along with the correct welding procedures are used in the creation of reactor cores for new construction nuclear power generation stations. In this project the effects of Lincoln Electrics ER-2209 GMAW wire are studied. Suggestions and improvements to the welding process are then proposed in order to increase the weldability, strength, gas selection, and ferrite count. The weldability will be measured using X-Ray photography in order to determine if any inclusions, lack of fusion, or voids are found post welding, along with welder feedback. The ferritic point count method in accordance with ASTM A562-08, is employed so that the amount of ferrite and austenite can be calculated in the same manor that is currently being used in industry. These will then be correlated to the tensile strength and impact toughness in the heat-affected zone (HAZ) of the weld based on the ASTM A923 testing method.
ContributorsCarter, Roger (Author) / Rogers, Bradley (Thesis advisor) / Gintz, Jerry (Committee member) / Georgeou, Trian (Committee member) / Arizona State University (Publisher)
Created2012
Description
Pelvic Circumferential Compression Devices (PCCDs), an important medical device when caring for patients with pelvic fractures, play a crucial role in the stabilization and reduction of the fracture. During pelvic fracture cases, control of internal bleeding through access to the femoral artery is of utmost importance. Current designs of PCCDs do not allow vital access to this artery and in attempts to gain access, medical professionals and emergency care providers choose to cut into the PCCDs or place them in suboptimal positions with unknown downstream effects. We researched the effects on surface pressure and the overall pressure distribution created by the PCCDs when they are modified or placed incorrectly on the patient. In addition, we investigated the effects of those misuses on pelvic fracture reduction, a key parameter in stabilizing the patient during critical care. We hypothesized that incorrectly placing or modifying the PCCD will result in increased surface pressure and decreased fracture reduction. Our mannequin studies show that for SAM Sling and T-POD, surface pressure increases if a PCCD is incorrectly placed or modified, in support of our hypothesis. However, opposite results occurred for the Pelvic Binder, where the correctly placed PCCD had higher surface pressure when compared to the incorrectly placed or modified PCCD. Additionally, pressure distribution was significantly affected by the modification of the PCCDs. The cadaver lab measurements show that modifying or incorrectly placing the PCCDs significantly limits their ability to reduce the pelvic fracture. These results suggest that while modifying or incorrectly placing PCCDs allows access to the femoral artery, there are potentially dangerous effects to the patient including increased surface pressures and limited fracture reduction.
ContributorsConley, Ian Patrick (Co-author) / Ryder, Madison (Co-author) / Vernon, Brent (Thesis director) / Bogert, James (Committee member) / Harrington Bioengineering Program (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
The Undoing Project is an ongoing educational feminist YouTube channel that serves as an introduction to feminism and feminist theory. The objective for this project is to present feminist theory and feminist ideology in an accessible and entertaining way. Through this project I sought to accomplish three goals: to challenge the negative image of feminism, bridge the gap between the language of academia and the public, and to acknowledge and unlearn ingrained prejudices. The videos focus on theory, history, legislation, current events, and pop culture. The initial project consists of ten videos addressing the feminist wave models, a brief history of the feminist movement, and discussions of concepts like hegemony, intersectionality, masculinity, femininity, and race.
ContributorsBuchholtz, Kaylee Marie (Author) / Brian, Jennifer (Thesis director) / Grzanka, Patrick (Committee member) / Brouwer, Dan (Committee member) / Barrett, The Honors College (Contributor) / College of Public Service and Community Solutions (Contributor) / School of Social Transformation (Contributor) / Department of English (Contributor)
Created2015-05
Description
"French Vanilla" is a collection of written narratives drawn from lived experiences which serve as the vehicle storytelling that I use to examine larger themes related to the intersections of race and gender. Themes include: binaries, legitimacy, intersectionality, biracial identity development (border identity construction), whiteness, shame, and crisis. While the narratives are situated within theoretical discourse, the narratives present a representation of the lived experience. These pieces engage members of my family as well as a number of figures, including Rachel Dolezal, President Barack Obama, Alicia Keys, and a stranger on a tram in an airport. My relationship with these people present the grounds for an interrogation of identity. This project asks the question: How does one negotiate biracial identity with herself and others through narrative performance? It engages theories, such as critical race theory, black feminist theory, and standpoint theory, which informed my understanding of the discourse of race and contextualized my commentary on race. These theories present a framework within which to situate my understanding and analysis of race through lived experience. Narrative performance, the formal methodology for this work, provides a structure for the performance itself: the ultimate end product. Note: This work of creative scholarship is rooted in collaboration between three female artist-scholars: Carly Bates, Raji Ganesan, and Allyson Yoder. Working from a common intersectional, feminist framework, we served as artistic co-directors of each other's solo pieces and co-producers of Negotiations, in which we share these pieces in relationship to each other. Thus, Negotiations is not a showcase of three individual works, but rather a conversation among three voices. As collaborators, we have been uncompromising in the pursuit of our own unique inquiries and voices, and each of our works of creative scholarship stand alone. However, we believe that all of the parts are best understood in relationship to each other and to the whole. For this reason, we have chosen to cross-reference our thesis documents: French Vanilla: An Exploration of Biracial Identity Through Narrative Performance by Carly Bates; Deep roots, shared fruits: Emergent creative process and the ecology of solo performance through "Dress in Something Plain and Dark" by Allyson Yoder; and Bhairavi: A Performance-Investigation of Belonging and Dis-Belonging in Diaspora Communities by Raji Ganesan.
ContributorsBates, Carly Christopher (Author) / Davis, Olga Idriss (Thesis director) / de la Garza, Sarah Amira (Committee member) / Dove-Viebahn, Aviva (Committee member) / School of Music (Contributor) / Department of English (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The seven interconnected short stories of Miserablists spring from a reality created by its protagonist and ostensible author: Paul Marston, a persistently melancholy undergraduate who tries to exorcise the ghost of a past love by adapting the story into a screenplay for a film entitled Miserablists. What happens to our identity, Paul asks, in post-narrative selfhood—that is, when the meaningful narratives we’ve told ourselves about others and ourselves collapse?
In other stories (wherein Paul tries—and often fails—to figure himself a secondary character), the tangled lives of his immediate social circle unravel, overlap, and disintegrate amidst the decaying milieu of the Scene and the maddening sprawl of Phoenix. A brief sampling of happenings: Sophie confronts ideological qualms with capitalism by way of a summer gig selling knives to depressed housewives; Brett nearly burns a house down on the Fourth of July; hallucinogenic kombucha is foisted upon a hapless Alex; black mold overtakes Paul’s residence; etc.
The core text is followed by an afterword supposedly written by (the perhaps psychotic) Saul P. Thomas Marton, Ph.D. and acts as an academic analysis of the nonexistent film adaption of Miserablists. There, Marton places Marston’s work in conversation with many influential critical text and works of fiction that shaped the formation of Miserablists (including Roland Barthes’ Lover’s Discourse, Slavoj Žižek’s The Plague of Fantasies, and Alain Robbe-Grillet’s Last Year at Marienbad).
In other stories (wherein Paul tries—and often fails—to figure himself a secondary character), the tangled lives of his immediate social circle unravel, overlap, and disintegrate amidst the decaying milieu of the Scene and the maddening sprawl of Phoenix. A brief sampling of happenings: Sophie confronts ideological qualms with capitalism by way of a summer gig selling knives to depressed housewives; Brett nearly burns a house down on the Fourth of July; hallucinogenic kombucha is foisted upon a hapless Alex; black mold overtakes Paul’s residence; etc.
The core text is followed by an afterword supposedly written by (the perhaps psychotic) Saul P. Thomas Marton, Ph.D. and acts as an academic analysis of the nonexistent film adaption of Miserablists. There, Marton places Marston’s work in conversation with many influential critical text and works of fiction that shaped the formation of Miserablists (including Roland Barthes’ Lover’s Discourse, Slavoj Žižek’s The Plague of Fantasies, and Alain Robbe-Grillet’s Last Year at Marienbad).
ContributorsWebb, Zachariah Kaylar (Author) / Gilfillan, Daniel (Thesis director) / Garrison, Gary (Committee member) / Department of English (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
To supplement lectures, various resources are available to students; however, little research has been done to look systematically at which resources studies find most useful and the frequency at which they are used. We have conducted a preliminary study looking at various resources available in an introductory material science course over four semesters using a custom survey called the Student Resource Value Survey (SRVS). More specifically, the SRVS was administered before each test to determine which resources students use to do well on exams. Additionally, over the course of the semester, which resources students used changed. For instance, study resources for exams including the use of homework problems decreased from 81% to 50%, the utilization of teaching assistant for exam studying increased from 25% to 80%, the use of in class Muddiest Points for exam study increased form 28% to 70%, old exams and quizzes only slightly increased for exam study ranging from 78% to 87%, and the use of drop-in tutoring services provided to students at no charge decreased from 25% to 17%. The data suggest that students thought highly of peer interactions by using those resources more than tutoring centers. To date, no research has been completed looking at courses at the department level or a different discipline. To this end, we adapted the SRVS administered in material science to investigate resource use in thirteen biomedical engineering (BME) courses. Here, we assess the following research question: "From a variety of resources, which do biomedical engineering students feel addresses difficult concept areas, prepares them for examinations, and helps in computer-aided design (CAD) and programming the most and with what frequency?" The resources considered include teaching assistants, classroom notes, prior exams, homework problems, Muddiest Points, office hours, tutoring centers, group study, and the course textbook. Results varied across the four topical areas: exam study, difficult concept areas, CAD software, and math-based programming. When preparing for exams and struggling with a learning concept, the most used and useful resources were: 1) homework problems, 2) class notes and 3) group studying. When working on math-based programming (Matlab and Mathcad) as well as computer-aided design, the most used and useful resources were: 1) group studying, 2) engineering tutoring center, and 3) undergraduate teaching assistants. Concerning learning concepts and exams in the BME department, homework problems and class notes were considered some of the highest-ranking resources for both frequency and usefulness. When comparing to the pilot study in MSE, both BME and MSE students tend to highly favor peer mentors and old exams as a means of studying for exams at the end of the semester1. Because the MSE course only considered exams, we cannot make any comparisons to BME data concerning programming and CAD. This analysis has highlighted potential resources that are universally beneficial, such as the use of peer work, i.e. group studying, engineering tutoring center, and teaching assistants; however, we see differences by both discipline and topical area thereby highlighting the need to determine important resources on a class-by-class basis as well.
ContributorsMalkoc, Aldin (Author) / Ankeny, Casey (Thesis director) / Krause, Stephen (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05