Matching Items (3)
Filtering by

Clear all filters

152670-Thumbnail Image.png
Description
The research described in this dissertation involved the use of transmission electron microscopy (TEM) to characterize II-VI and III-V compound semiconductor quantum dots (QDs) and dilute-nitride alloys grown by molecular beam epitaxy (MBE) and intended for photovoltaic applications. The morphology of CdTe QDs prepared by the post-annealing MBE method were

The research described in this dissertation involved the use of transmission electron microscopy (TEM) to characterize II-VI and III-V compound semiconductor quantum dots (QDs) and dilute-nitride alloys grown by molecular beam epitaxy (MBE) and intended for photovoltaic applications. The morphology of CdTe QDs prepared by the post-annealing MBE method were characterized by various microscopy techniques including high-resolution transmission electron microscopy (HR-TEM), and high-angle annular-dark-field scanning transmission electron microscopy (HAADF-STEM). Extensive observations revealed that the of QD shapes were not well-defined, and the QD size and spatial distribution were not determined by the amount of CdTe deposition. These results indicated that the formation of II-VI QDs using a post-annealing treatment did not follow the conventional growth mechanism for III-V and IV-IV materials. The structural properties of dilute-nitride GaAsNx films grown using plasma-assisted MBE were characterized by TEM and HAADF-STEM. A significant amount of the nitrogen incorporated into the dilute nitride films was found to be interstitial, and that fluctuations in local nitrogen composition also occurred during growth. Post-growth partial relaxation of strain resulted in the formation of {110}-oriented microcracks in the sample with the largest substitutional nitrogen composition. Single- and multi-layered InAs QDs grown on GaAsSb/GaAs composite substrates were investigated using HR-TEM and HAADF-STEM. Correlation between the structural and optoelectronic properties revealed that the GaAsSb barrier layers had played an important role in tuning the energy-band alignments but without affecting the overall structural morphology. However, according to both XRD measurement and electron microscopy the densities of dislocations increased as the number of QD layers built up. An investigation of near-wetting layer-free InAs QDs incorporated with AlAs/GaAs spacer layers was carried out. The microscopy observations revealed that both embedded and non-embedded near-wetting layer-free InAs QDs did not have well-defined shapes unlike conventional InAs QDs. According to AFM analysis and plan-view TEM characterization, the InAs QDs incorporated with spacer layers had smaller dot density and more symmetrical larger sizes with an apparent bimodal size distribution (two distinct families of large and small dots) in comparison with conventional InAs QDs grown without any spacer layer.
ContributorsTang, Dinghao (Author) / Smith, David J. (Thesis advisor) / Crozier, Peter A. (Committee member) / Liu, Jingyue (Committee member) / Mccartney, Martha R (Committee member) / Arizona State University (Publisher)
Created2014
157157-Thumbnail Image.png
Description
Among the alternative processes for the traditional distillation, adsorption and membrane separations are the two most promising candidates and metal-organic frameworks (MOFs) are the new material candidate as adsorbent or membrane due to their high surface area, various pore sizes, and highly tunable framework functionality. This dissertation presents an investigation

Among the alternative processes for the traditional distillation, adsorption and membrane separations are the two most promising candidates and metal-organic frameworks (MOFs) are the new material candidate as adsorbent or membrane due to their high surface area, various pore sizes, and highly tunable framework functionality. This dissertation presents an investigation of the formation process of MOF membrane, framework defects, and two-dimensional (2D) MOFs, aiming to explore the answers for three critical questions: (1) how to obtain a continuous MOF membrane, (2) how defects form in MOF framework, and (3) how to obtain isolated 2D MOFs. To solve the first problem, the accumulated protons in the MOF synthesis solution is proposed to be the key factor preventing the continuous growth among Universitetet I Oslo-(UiO)-66 crystals. The hypothesis is verified by the growth reactivation under the addition of deprotonating agent. As long as the protons were sufficiently coordinated by the deprotonating agent, the continuous growth of UiO-66 is guaranteed. Moreover, the modulation effect can impact the coordination equilibrium so that an oriented growth of UiO-66 film was achieved in membrane structures. To find the answer for the second problem, the defect formation mechanism in UiO-66 was investigated and the formation of missing-cluster (MC) defects is attributed to the partially-deprotonated ligands. Experimental results show the number of MC defects is sensitive to the addition of deprotonating agent, synthesis temperature, and reactant concentration. Pore size distribution allows an accurate and convenient characterization of the defects. Results show that these defects can cause significant deviations of its pore size distribution from the perfect crystal. The study of the third questions is based on the established bi-phase synthesis method, a facile synthesis method is adopted for the production of high quality 2D MOFs in large scale. Here, pyridine is used as capping reagent to prevent the interplanar hydrogen bond formation. Meanwhile, formic acid and triethylamine as modulator and deprotonating agent to balance the anisotropic growth, crystallinity, and yield in the 2D MOF synthesis. As a result, high quality 2D zinc-terephthalic acid (ZnBDC) and copper-terephthalic acid (CuBDC) with extraordinary aspect ratio samples were successfully synthesized.
ContributorsShan, Bohan (Author) / Mu, Bin (Thesis advisor) / Forzani, Erica (Committee member) / Dai, Lenore (Committee member) / Lin, Jerry (Committee member) / Liu, Jingyue (Committee member) / Arizona State University (Publisher)
Created2019
161813-Thumbnail Image.png
Description
Oxygen transfer reactions are central to many catalytic processes, including those underlying automotive exhaust emissions control and clean energy conversion. The catalysts used in these applications typically consist of metal nanoparticles dispersed on reducible oxides (e.g., Pt/CeO2), since reducible oxides can transfer their lattice oxygen to reactive adsorbates at the

Oxygen transfer reactions are central to many catalytic processes, including those underlying automotive exhaust emissions control and clean energy conversion. The catalysts used in these applications typically consist of metal nanoparticles dispersed on reducible oxides (e.g., Pt/CeO2), since reducible oxides can transfer their lattice oxygen to reactive adsorbates at the metal-support interface. There are many outstanding questions regarding the atomic and nanoscale spatial variation of the Pt/CeO2 interface, Pt metal particle, and adjacent CeO2 oxide surface during catalysis. To this end, a range of techniques centered around aberration-corrected environmental transmission electron microscopy (ETEM) were developed and employed to visualize and characterize the atomic-scale structural behavior of CeO2-supported Pt catalysts under reaction conditions (in situ) and/or during catalysis (operando). A model of the operando ETEM reactor was developed to simulate the gas and temperature profiles during conditions of catalysis. Most importantly, the model provides a tool for relating the reactant conversion measured with spectroscopy to the reaction rate of the catalyst that is imaged on the TEM grid. As a result, this work has produced a truly operando TEM methodology, since the structure observed during an experiment can be directly linked to quantitative chemical kinetics of the same catalyst. This operando ETEM approach was leveraged to investigate structure-activity relationships for CO oxidation over Pt/CeO2 catalysts. Correlating atomic-level imaging with catalytic turnover frequency reveals a direct relationship between activity and dynamic structural behavior that (a) destabilizes the supported Pt particle, (b) marks an enhanced rate of oxygen vacancy creation and annihilation, and (c) leads to increased strain and reduction in the surface of the CeO2 support. To further investigate the structural meta-stability (i.e., fluxionality) of 1 – 2 nm CeO2-supported Pt nanoparticles, time-resolved in situ AC-ETEM was employed to visualize the catalyst’s dynamical behavior with high spatiotemporal resolution. Observations are made under conditions relevant to the CO oxidation and water-gas shift (WGS) reactions. Finally, deep learning-based convolutional neural networks were leveraged to develop novel denoising techniques for ultra-low signal-to-noise images of catalytic nanoparticles.
ContributorsVincent, Joshua Lawrence (Author) / Crozier, Peter A (Thesis advisor) / Liu, Jingyue (Committee member) / Muhich, Christopher L (Committee member) / Nannenga, Brent L (Committee member) / Singh, Arunima K (Committee member) / Arizona State University (Publisher)
Created2021