Matching Items (3)
Filtering by
- All Subjects: chemical engineering
- All Subjects: Iodides
Description
An urgent need for developing new chemical separations that address the capture of dilute impurities from fluid streams are needed. These separations include the capture of carbon dioxide from the atmosphere, impurities from drinking water, and toxins from blood streams. A challenge is presented when capturing these impurities because the energy cost for processing the bulk fluid stream to capture trace contaminants is too great using traditional thermal separations. The development of sorbents that may capture these contaminants passively has been emphasized in academic research for some time, producing many designer materials including metal-organic frameworks (MOFs) and polymeric resins. Scaffolds must be developed to effectively anchor these materials in a passing fluid stream. In this work, two design techniques are presented for anchoring these sorbents in electrospun fiber scaffolds.
The first technique involves imbedding sorbent particles inside the fibers: forming particle-embedded fibers. It is demonstrated that particles will spontaneously coat themselves in the fibers at dilute loadings, but at higher loadings some get trapped on the fiber surface. A mathematical model is used to show that when these particles are embedded, the polymeric coating provided by the fibers may be designed to increase the kinetic selectivity and/or stability of the embedded sorbents. Two proof-of-concept studies are performed to validate this model including the increased selectivity of carbon dioxide over nitrogen when the MOF ZIF-8 is embedded in a poly(ethylene oxide) and Matrimid polymer blend; and that increased hydrothermal stability is realized when the water-sensitive MOF HKUST-1 is embedded in polystyrene fibers relative to pure HKUST-1 powder.
The second technique involves the creation of a pore network throughout the fiber to increase accessibility of embedded sorbent particles. It is demonstrated that the removal of a blended highly soluble polymer additive from the spun particle-containing fibers leaves a pore network behind without removing the embedded sorbent. The increased accessibility of embedded sorbents is validated by embedding a known direct air capture sorbent in porous electrospun fibers, and demonstrating that they have the fastest kinetic uptake of any direct air capture sorbent reported in literature to date, along with over 90% sorbent accessibility.
The first technique involves imbedding sorbent particles inside the fibers: forming particle-embedded fibers. It is demonstrated that particles will spontaneously coat themselves in the fibers at dilute loadings, but at higher loadings some get trapped on the fiber surface. A mathematical model is used to show that when these particles are embedded, the polymeric coating provided by the fibers may be designed to increase the kinetic selectivity and/or stability of the embedded sorbents. Two proof-of-concept studies are performed to validate this model including the increased selectivity of carbon dioxide over nitrogen when the MOF ZIF-8 is embedded in a poly(ethylene oxide) and Matrimid polymer blend; and that increased hydrothermal stability is realized when the water-sensitive MOF HKUST-1 is embedded in polystyrene fibers relative to pure HKUST-1 powder.
The second technique involves the creation of a pore network throughout the fiber to increase accessibility of embedded sorbent particles. It is demonstrated that the removal of a blended highly soluble polymer additive from the spun particle-containing fibers leaves a pore network behind without removing the embedded sorbent. The increased accessibility of embedded sorbents is validated by embedding a known direct air capture sorbent in porous electrospun fibers, and demonstrating that they have the fastest kinetic uptake of any direct air capture sorbent reported in literature to date, along with over 90% sorbent accessibility.
ContributorsArmstrong, Mitchell (Author) / Mu, Bin (Thesis advisor) / Green, Matthew (Committee member) / Seo, Dong (Committee member) / Lackner, Klaus (Committee member) / Holloway, Julianne (Committee member) / Arizona State University (Publisher)
Created2018
Description
Iodide (I-) in surface and groundwaters is a potential precursor for the formation of iodinated disinfection by-products (I-DBPs) during drinking water treatment. The aim of this thesis is to provide a perspective on the sources and occurrence of I- in United States (US) source waters based on ~9200 surface water (SW) and groundwater (GW) sampling locations. The median I- concentrations observed was 16 μg/l and 14 μg/l, respectively in SW and GW. However, these samples were rarely collected at water treatment plant (WTP) intakes, where such iodide occurrence data is needed to understand impacts on DBPs. Most samples were collected in association with geochemical studies. We conclude that I- occurrence appears to be influenced by geological features, including halite rock/river basin formations, saline aquifers and organic rich shale/oil formations. Halide ratios (Cl-/I-, Br-/I- and Cl-/Br-) were analyzed to determine the I- origin in source waters. SW and GW had median Cl-/I- ratios of ~3600 μg/μg and median Br-/I- ratios of ~15 μg/μg. For states with I- concentration >50 μg/l (e.g., Montana and North Dakota), a single source (i.e., organic rich formations) can be identified. However, for states like California and Texas that have wide-ranging I- concentration of below detection limit to >250 μg/l, I- occurrence can be attributed to a mixture of marine and organic signatures. The lack of information of organic iodine, inorganic I- and IO3- in source waters limits our ability to predict I-DBPs formed during drinking water treatment, and new occurrence studies are needed to fill these data gaps. This is first of its kind study to understand the I- occurrence through historical data, however we also identify the shortcomings of existing databases used to carry out this study.
ContributorsSharma, Naushita (Author) / Westerhoff, Paul (Thesis advisor) / Lackner, Klaus (Committee member) / Herckes, Pierre (Committee member) / Arizona State University (Publisher)
Created2018
Description
The excessive use of fossil fuels over the last few centuries has led to unprecedented changes in climate and a steady increase in the average surface global temperatures. Direct Air Capture(DAC) aims to capture CO2 directly from the atmosphere and alleviate some of the adverse effects of climate change. This dissertation focuses on methodologies to make advanced functional materials that show good potential to be used as DAC sorbents. Details on sorbent material synthesis and post-synthesis methods to obtain high surface area morphologies are described in detail. First, by incorporating K2CO3 into activated carbon (AC) fiber felts, the sorption kinetics was significantly improved by increasing the surface area of K2CO3 in contact with air. The AC-K2CO3 fiber composite felts are flexible, cheap, easy to manufacture, chemically stable, and show excellent DAC capacity and (de)sorption rates, with stable performance up to ten cycles. The best composite felts collected an average of 478 µmol of CO2 per gram of composite during 4 h of exposure to ambient (24% RH) air that had a CO2 concentration of 400-450 ppm over 10 cycles. Secondly, incorporating the amino acid L-arginine (L-Arg) into a poly(vinyl alcohol) (PVA) nanofiber support structure, created porous substrates with very high surface areas of L-Arg available for CO2 sorption. The bio-inspired PVA-Arg nanofiber composites are flexible and show excellent DAC performance compared to bulk L-Arg. The nanofiber composites are fabricated from an electrospinning process using an aqueous polymer solution. High ambient humidity levels improve sorption performance significantly. The best performing nanofiber composite collected 542 µmol of CO2 per gram of composite during 2 h of exposure to ambient, high humidity (100% RH) air that had a CO2 concentration of 400-450 ppm. Finally, poly(vinyl guanidine) (PVG) polymer was synthesized and tested for sorption performance. The fabrication of PVG nanofibers, divinyl benzene crosslinked PVG beads and glutaraldehyde crosslinked PVG were demonstrated. The sorption performance of the fabricated sorbents were tested with the glutaraldehyde crosslinked PVG having a dynamic sorption capacity of over 1 mmol of CO2 per gram of polymer in 3 h. The sorption capability of liquid PVG was also explored.
ContributorsModayil Korah, Mani (Author) / Green, Matthew D (Thesis advisor) / Lackner, Klaus (Committee member) / Long, Timothy E (Committee member) / Thomas, Marylaura L (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2024