Matching Items (711)
Filtering by
- All Subjects: Materials Science
- Resource Type: Text
Description
In this thesis, applications of sparsity, specifically sparse-tensors are motivated in physics.An algorithm is introduced to natively compute sparse-tensor's partial-traces, along with direct implementations in popular python libraries for immediate use. These applications include the infamous exponentially-scaling (with system size) Quantum-Many-Body problems (both Heisenberg/spin-chain-like and Chemical Hamiltonian models). This sparsity aspect is stressed as an important and essential feature in solving many real-world physical problems approximately-and-numerically. These include the original motivation of solving radiation-damage questions for ultrafast light and electron sources.
ContributorsCandanedo, Julio (Author) / Beckstein, Oliver (Thesis advisor) / Arenz, Christian (Thesis advisor) / Keeler, Cynthia (Committee member) / Erten, Onur (Committee member) / Arizona State University (Publisher)
Created2023
Description
The first part of this dissertation focuses on quantum structures with type-II band alignment, which are designed for applications in infrared photodetection and optical nonlinearity. A short- and mid-wavelength infrared dual-band optically-addressed photodetector structure has been designed and fabricated by molecular beam epitaxy, which is used to demonstrate the operational principles of optical address for extended tri-band detection. High-resolution x-ray diffraction and photoluminescence measurement were used to characterize the samples and revealed excellent crystalline quality and optical properties. An analytical model has been developed to address the effects of luminescence coupling and light leakage effects in optically-addressed tri-band photodetectors in terms of the absorber thicknesses and photoluminescence quantum efficiencies.Beyond superlattices, asymmetric quantum wells with type-II band alignment find application in optical nonlinearity enhancement which is the result of increased wavefunction overlap and larger electric dipole moments of the interband transitions compared to the conventional structures with type-I band edge alignment. The novel type-II AQW structure exhibits interband second-order susceptibility tensor elements ranging between 20 pm/V to 1.60×103 pm/V for nearly-resonant optical rectification and difference frequency generation applications at near-infrared and terahertz wavelengths, an improvement of nearly one order of magnitude over the type-I structures and one to three orders of magnitude over natural crystals such as LiNbO3, KTP, or GaAs. A factor of 2-3 further enhancement of the tensor elements is achieved by optimizing the well widths and band offsets of the type-II asymmetric quantum wells.
The second part of the dissertation reports the study of CdSe thin films with mixed zincblende and wurtzite phases grown on lattice-matched InAs(100) substrate using molecular beam epitaxy. These CdSe thin films reveal single-phase zincblende (ZB) structure with high crystalline quality with low defect density. In contrast, CdSe layers grown on lattice-matched InAs(111)B (As-terminated) substrates under different growth temperatures and Cd/Se flux ratios all have their demonstrated mixed ZB and wurtzite phases in coexistence confirmed by high-resolution x-ray diffraction, transmission electron microscopy and photoluminescence measurements. The reason for these properties is due to the small formation energy difference between the ZB and WZ phases of CdSe, which has been confirmed by density functional theory simulations.
ContributorsJu, Zheng (Author) / Zhang, Yong-Hang YHZ (Thesis advisor) / Smith, David DJS (Committee member) / Johnson, Shane SRJ (Committee member) / Ponce, Fernando FAP (Committee member) / Arizona State University (Publisher)
Created2023
Description
Air conditioning is a significant energy consumer in buildings, especially in humid regions where a substantial portion of energy is used to remove moisture rather than cool the air. Traditional dehumidification methods, which cool air to its dew point to condense water vapor, are energy intensive. This process unnecessarily overcools the air, only to reheat it to the desired temperature.This research introduces thermoresponsive materials as efficient desiccants to reduce energy demand for dehumidification. A system using lower critical solution temperature (LCST) type ionic liquids (ILs) as dehumidifiers is presented. Through the Flory-Huggins theory of mixtures, interactions between ionic liquids and water are analyzed. LCST ionic liquids demonstrate superior performance, with a coefficient of performance (COP) four times higher than non-thermoresponsive desiccants under similar conditions. The efficacy of ionic liquids as dehumidifiers is assessed based on properties like LCST temperature and enthalpic interaction parameter.
The research also delves into thermoresponsive solid desiccants, particularly polymers, using the Vrentas-Vrentas model. This model offers a more accurate depiction of their behaviors compared to the Flory-Huggins theory by considering elastic energy stored in the polymers. Moisture absorption in thin film polymers is studied under diverse conditions, producing absorption isotherms for various temperatures and humidities. Using temperature-dependent interaction parameters, the behavior of the widely-used thermoresponsive polymer (TRP) PNIPAAm and hypothetical TRPs is investigated. The parameters from the model are used as input to do a finite element analysis of a thermoresponsive dehumidifier. This model demonstrates the complete absorption-desorption cycle under varied conditions such as polymer absorption temperature, relative humidity, and air speed. Results indicate that a TRP with enhanced absorption capacity and an LCST of 50℃ achieves a peak moisture removal efficiency (MRE) of 0.9 at 75% relative humidity which is comparable to other existing thermoresponsive dehumidification systems. But other TRPs with even greater absorption capacity can produce MRE as high as 3.6. This system also uniquely recovers water in liquid form.
ContributorsRana, Ashish (Author) / Wang, Robert RW (Thesis advisor) / Green, Matthew MG (Committee member) / Milcarek, Ryan RM (Committee member) / Wang, Liping LW (Committee member) / Phelan, Patrick PP (Committee member) / Arizona State University (Publisher)
Created2023
Description
This project was designed to evaluate a nutrition educational tool designated to educate high school dancers about the importance of nutrition through collecting feedback from dancers during focus group discussions. The nutrition educational tool was created to be easy to read and understand, while still informing on important topics such as water intake, sleep, food groups, diets, and meal prepping. After giving a presentation of the tool to a group of high school dancers, eleven students from a high school dance team completed a survey answering questions about the tool and then participated in a group discussion that asked guided questions about their perceptions of the material presented and their suggestions for edits. Results showed that overall, the participants found this tool useful, but suggested improvements include missing information on the sleep requirement section, more suggestions for dietary restrictions, and additional details about foods and meal prepping. Overall, students found this tool useful for themselves, but results were mixed about if they would use this information in the future or share it with others. Nutrition is an important topic for high school athletes, especially dancers, and should be taught in order to keep dancers healthy.
ContributorsSandnas, Courtney (Author) / Vega-Lopez, Sonia (Thesis director) / Grant, Shauna (Committee member) / Barrett, The Honors College (Contributor) / College of Health Solutions (Contributor)
Created2023-12
The Intercoupling of Thermal Transport and Mechanical Properties in Colloidal Nanocrystal Assemblies
Description
Colloidal nanocrystals (NCs) are promising candidates for a wide range of applications (electronics, optoelectronics, photovoltaics, thermoelectrics, etc.). Mechanical and thermal transport property play very important roles in all of these applications. On one hand, mechanical robustness and high thermal conductivity are desired in electronics, optoelectronics, and photovoltaics. This improves thermomechanical stability and minimizes the temperature rise during the device operation. On the other hand, low thermal conductivity is desired for higher thermoelectric figure of merit (ZT). This dissertation demonstrates that ligand structure and nanocrystal ordering are the primary determining factors for thermal transport and mechanical properties in colloidal nanocrystal assemblies. To eliminate the mechanics and thermal transport barrier, I first propose a ligand crosslinking method to improve the thermal transport across the ligand-ligand interface and thus increasing the overall thermal conductivity of NC assemblies. Young’s modulus of nanocrystal solids also increases simultaneously upon ligand crosslinking. My thermal transport measurements show that the thermal conductivity of the iron oxide NC solids increases by a factor of 2-3 upon ligand crosslinking. Further, I demonstrate that, though with same composition, long-range ordered nanocrystal superlattices possess higher mechanical and thermal transport properties than disordered nanocrystal thin films. Experimental measurements along with theoretical modeling indicate that stronger ligand-ligand interaction in NC superlattice accounts for the improved mechanics and thermal transport. This suggests that NC/ligand arranging order also plays important roles in determining mechanics and thermal transport properties of NC assemblies. Lastly, I show that inorganic ligand functionalization could lead to tremendous mechanical enhancement (a factor of ~60) in NC solids. After ligand exchange and drying, the short inorganic Sn2S64- ligands dissociate into a few atomic layers of amorphous SnS2 at room temperature and interconnects the neighboring NCs. I observe a reverse Hall-Petch relation as the size of NC decreases. Both atomistic simulations and analytical phase mixture modeling identify the grain boundaries and their activities as the mechanic bottleneck.
ContributorsWang, Zhongyong (Author) / Wang, Robert RW (Thesis advisor) / Wang, Liping LW (Committee member) / Newman, Nathan NN (Committee member) / Arizona State University (Publisher)
Created2021
Description
Banded iron formations (BIFs) are among the earliest possible indicators for oxidation of the Archean biosphere. However, the origin of BIFs remains debated. Proposed formation mechanisms include oxidation of Fe(II) by O2 (Cloud, 1973), photoferrotrophy (Konhauser et al., 2002), and abiotic UV photooxidation (Braterman et al., 1983; Konhauser et al., 2007). Resolving this debate could help determine whether BIFs are really indicators of O2, biological activity, or neither.
To examine the viability of abiotic UV photooxidation of Fe, laboratory experiments were conducted in which Fe-bearing solutions were irradiated with different regions of the ultraviolet (UV) spectrum and Fe oxidation and precipitation were measured. The goal was to revisit previous experiments that obtained conflicting results, and extend these experiments by using a realistic bicarbonate buffered solution and a xenon (Xe) lamp to better match the solar spectrum and light intensity.
In experiments reexamining previous work, Fe photooxidation and precipitation was observed. Using a series of wavelength cut-off filters, the reaction was determined not to be caused by light > 345 nm. Experiments using a bicarbonate buffered solution, simulating natural waters, and using unbuffered solutions, as in prior work showed the same wavelength sensitivity. In an experiment with a Xe lamp and realistic concentrations of Archean [Fe(II)], Fe precipitation was observed in hours, demonstrating the ability for photooxidation to occur significantly in a simulated natural setting.
These results lead to modeled Fe photooxidation rates of 25 mg Fe cm-2 yr-1—near the low end of published BIF deposition rates, which range from 9 mg Fe cm-2 yr-1 to as high as 254 mg Fe cm-2 yr-1 (Konhauser et al., 2002; Trendall and Blockley, 1970). Because the rates are on the edge and the model has unquantified, favorable assumptions, these results suggest that photooxidation could contribute to, but might not be completely responsible for, large rapidly deposited BIFs such those in the Hamersley Basin. Further work is needed to improve the model and test photooxidation with other solution components. Though possibly unable to fully explain BIFs, UV light has significant oxidizing power, so the importance of photooxidation in the Archean as an environmental process and its impact on paleoredox proxies need to be determined.
To examine the viability of abiotic UV photooxidation of Fe, laboratory experiments were conducted in which Fe-bearing solutions were irradiated with different regions of the ultraviolet (UV) spectrum and Fe oxidation and precipitation were measured. The goal was to revisit previous experiments that obtained conflicting results, and extend these experiments by using a realistic bicarbonate buffered solution and a xenon (Xe) lamp to better match the solar spectrum and light intensity.
In experiments reexamining previous work, Fe photooxidation and precipitation was observed. Using a series of wavelength cut-off filters, the reaction was determined not to be caused by light > 345 nm. Experiments using a bicarbonate buffered solution, simulating natural waters, and using unbuffered solutions, as in prior work showed the same wavelength sensitivity. In an experiment with a Xe lamp and realistic concentrations of Archean [Fe(II)], Fe precipitation was observed in hours, demonstrating the ability for photooxidation to occur significantly in a simulated natural setting.
These results lead to modeled Fe photooxidation rates of 25 mg Fe cm-2 yr-1—near the low end of published BIF deposition rates, which range from 9 mg Fe cm-2 yr-1 to as high as 254 mg Fe cm-2 yr-1 (Konhauser et al., 2002; Trendall and Blockley, 1970). Because the rates are on the edge and the model has unquantified, favorable assumptions, these results suggest that photooxidation could contribute to, but might not be completely responsible for, large rapidly deposited BIFs such those in the Hamersley Basin. Further work is needed to improve the model and test photooxidation with other solution components. Though possibly unable to fully explain BIFs, UV light has significant oxidizing power, so the importance of photooxidation in the Archean as an environmental process and its impact on paleoredox proxies need to be determined.
ContributorsCastleberry, Parker (Author) / Anbar, Ariel D (Thesis advisor) / Herckes, Pierre (Committee member) / Lyons, James (Committee member) / Arizona State University (Publisher)
Created2017
Description
Over the past few years, research into the use of doped diamond in electronics has seen an exponential growth. In the course of finding ways to reduce the contact resistivity, nanocarbon materials have been an interesting focus. In this work, the transfer length method (TLM) was used to investigate Ohmic contact properties using the tri-layer stack Ti/Pt/Au on nitrogen-doped n-type conducting nano-carbon (nanoC) layers grown on (100) diamond substrates. The nanocarbon material was characterized using Secondary Ion Mass Spectrometry (SIMS), Scanning electron Microscopy (SEM) X-ray diffraction (XRD), Raman scattering and Hall effect measurements to probe the materials characteristics. Room temperature electrical measurements were taken, and samples were annealed to observe changes in electrical conductivity. Low specific contact resistivity values of 8 x 10^-5 Ωcm^2 were achieved, which was almost two orders of magnitude lower than previously reported values. The results were attributed to the increased nitrogen incorporation, and the presence of electrically active defects which leads to an increase in conduction in the nanocarbon. Further a study of light phosphorus doped layers using similar methods with Ti/Pt/Au contacts again yielded a low contact resistivity of about 9.88 x 10^-2 Ωcm^2 which is an interesting prospect among lightly doped diamond films for applications in devices such as transistors. In addition, for the first time, hafnium was substituted for Ti in the contact stack (Hf/Pt/Au) and studied on nitrogen doped nanocarbon films, which resulted in low contact resistivity values on the order of 10^-2 Ωcm^2. The implications of the results were discussed, and recommendations for improving the experimental process was outlined. Lastly, a method for the selective area growth of nanocarbon was developed and studied and the results provided an insight into how different characterizations can be used to confirm the presence of the nanocrystalline diamond material, the limitations due to the film thickness was explored and ideas for future work was proposed.
ContributorsAmonoo, Evangeline Abena (Author) / Thornton, Trevor (Thesis advisor) / Alford, Terry L (Thesis advisor) / Anwar, Shahriar (Committee member) / Theodore, David (Committee member) / Arizona State University (Publisher)
Created2023
Description
Late first row transitional metals have attracted attention for the development of sustainable catalysts due to their low cost and natural abundance. This dissertation discusses the utilization of redox-active ligands to overcome one electron redox processes exhibited by these base metals. Previous advances in carbonyl and carboxylate hydrosilylation using redox active ligand-supported complexes such as (Ph2PPrPDI)Mn and (Ph2PPrDI)Ni have been reviewed in this thesis to set the stage for the experimental work described herein.The synthesis and electronic structure of late first row transition metal complexes featuring the Ph2PPrPDI chelate was pursued. Utilizing these complexes as catalysts for a variety of reactions gave a recurring trend in catalytic activity. DFT calculations suggest that the trend in activity observed for these complexes is associated with the ease of phosphine arm dissociation.
Furthermore, the synthesis and characterization of a phosphine-substituted aryl diimine ligand, Ph2PPrADI-H was explored. Addition of Ph2PPrADI-H to CoCl2 resulted in C-H activation of the ligand backbone and formation of [(Ph2PPrADI)CoCl][Co2Cl6]0.5. Reduction of [(Ph2PPrADI)CoCl][Co2Cl6]0.5 afforded the precatalyst, (Ph2PPrADI)Co, that was found to effectively catalyze carbonyl hydrosilylation. At low catalyst loading, TOFs of up to 330 s-1 could be achieved, the highest ever reported for metal-catalyzed carbonyl hydrosilylation.
This dissertation also reports the first cobalt catalyzed pathway for dehydrocoupling diamines or polyamines with polymethylhydrosiloxanes to form crosslinked copolymers. At low catalyst loading, (Ph2PPrADI)Co was found to catalyze the dehydrocoupling of 1,3-diaminopropane and TMS-terminated PMHS with TOFs of up to 157 s-1, the highest TOF ever reported for a Si-N dehydrocoupling reaction. Dehydrocoupling of diamines with hydride-terminated polydimethylsiloxane yielded linear diamine siloxane copolymers as oils.
Finally, dehydrocoupling between diamines and organosilanes catalyzed by a manganese dimer complex, [(2,6-iPr2PhBDI)Mn(μ-H)]2, has allowed for the preparation of silane diamine copolymers. Exceptional solvent absorption capacity was demonstrated by the solid networks, which were found to absorb up to 7 times their own weight. Furthermore, degradation of these networks revealed that their Si-N backbones are easily hydrolysable when exposed to air. The use of lightly crosslinked copolymers as coatings was also studied using SEM analysis.
ContributorsSharma, Anuja (Author) / Trovitch, Ryan J. (Thesis advisor) / Seo, Dong-Kyun (Committee member) / Moore, Gary F. (Committee member) / Arizona State University (Publisher)
Created2024
Description
Integrating advanced materials with innovative manufacturing techniques has propelled the field of additive manufacturing into new frontiers. This study explores the rapid 3D printing of reduced graphene oxide/polymer composites using Micro-Continuous Liquid Interface Production (μCLIP), a cutting-edge technology known for its speed and precision. A printable ink is formulated with reduced graphene oxide for μCLIP-based 3D printing. The research focuses on optimizing μCLIP parameters to fabricate reduced graphene composites efficiently. The study encompasses material synthesis, ink formulation and explores the resulting material's structural and electrical properties. The marriage of graphene's unique attributes with the rapid prototyping capabilities of μCLIP opens new avenues for scalable and rapid production in applications such as energy storage, sensors, and lightweight structural components. This work contributes to the evolving landscape of advanced materials and additive manufacturing, offering insights into the synthesis, characterization, and potential applications of 3D printed reduced graphene oxide/polymercomposites.
ContributorsRavishankar, Chayaank Bangalore (Author) / Chen, Xiangfan (Thesis advisor) / Bhate, Dhruv (Committee member) / Azeredo, Bruno (Committee member) / Arizona State University (Publisher)
Created2024
Description
Engineering polymers are critical for contemporary high-performance applications where toughness, thermal stability, and density are at a premium. These materials often demand high-energy processing conditions or highly reactive monomers that hold negative impacts on human and environmental health. Thus, this work serves to remediate the negative impacts of engineering polymer synthesis by addressing toxicity and processing at the monomer level, while maintaining or exceeding previous thermomechanical and stimuli-responsive performance. Polyurethanes (PUs) represent a class of engineering polymers that possess highly modular properties due to the diverse monomer selection available for their synthesis. The efficient reaction between isocyanates and hydroxyls impart stellar properties and flexible processing modalities, however recent scrutiny regarding the toxicity of the isocyanate precursors has driven the search for non-isocyanate polyurethane (NIPU) pathways. The advancement of bis-carbonylimidazolide (BCI) monomers for the synthesis of NIPU thermoplastics and foams is thoroughly investigated in this work. Remarkably, a novel decarboxylation pathway for BCI monomers controlled by catalyst loading enabled in-situ CO2 generation during crosslinking with trifunctional amines, and resulted in a facile synthetic route for NIPU foams. Further explorations into catalyst considerations revealed Dabco® 33-LV as a suitable mechanism for controlling reaction times and careful selection of surfactant concentration provided control over pore size and geometry. This led to a library of flexible and rigid NIPU foams that displayed a wide range of thermomechanical properties. Furthermore, sequestration of the imidazole byproduct through an efficient Michael reaction identified maleimide and acrylate additives as a viable pathway to eliminate post-processing steps resulting in NIPU foam synthesis that is amenable to current industrial standards. This route held advantages over the isocyanate route, as condensate removal drove molecular weight increase and ultimately achieved the first reported phase separation behavior of a NIPU thermoplastic containing a poly(ethylene glycol) soft segment. Furthermore, sustainable considerations for engineering polymers were explored with the introduction of a novel cyclobutane bisimide monomer that readily installs into various polymeric systems. Direct installation of this monomer, CBDA-AP-I, into a polysulfone backbone enabled controlled photo-cleavage, while further hydroxy ethyl functionalization allowed for incorporation into PU systems for photo-cleavable high-performance adhesive applications.
ContributorsSintas, Jose Ignacio (Author) / Long, Timothy E (Thesis advisor) / Sample, Caitlin S. (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2024