Matching Items (731)
Filtering by
- All Subjects: psychology
- All Subjects: Mechanical Engineering
- All Subjects: Materials Science
- Genre: Masters Thesis
Description
The current paper presents two studies that examine how asymmetries during interpersonal coordination are compensated for. It was predicted that destabilizing effects of asymmetries are stabilized through the recruitment and suppression of motor degrees-of-freedom (df). Experiment 1 examined this effect by having participants coordinate line movements of different orientations. Greater differences in asymmetries between participants yielded greater spatial deviation, resulting in the recruitment of df. Experiment 2 examined whether coordination of movements asymmetrical in shape (circle and line) yield simultaneous recruitment and suppression of df. This experiment also tested whether the initial stability of the performed movement alters the amount of change in df. Results showed that changes in df were exhibited as circles decreasing in circularity and lines increasing in circularity. Further, more changes in df were found circular (suppression) compared to line (recruitment) movements.
ContributorsFine, Justin (Author) / Amazeen, Eric L (Thesis advisor) / Amazeen, Polemnia G (Committee member) / Brewer, Gene A. (Committee member) / Arizona State University (Publisher)
Created2013
Description
There has been much interest in photoelectrochemical conversion of solar energy in recent years due to its potential for low-–cost, sustainable and renewable production of fuels. Despite the huge potential, there are still a number of technical barriers due to the many constraints needed in order to drive photoelectrochemical reactions such as overall water splitting and the identification of efficient and effective semiconductor materials. To this end, the search for novel semiconductors that can act as light absorbers is still needed. The copper hydroxyphosphate mineral libethenite (CHP), which has a chemical formula of Cu2(OH)PO4, has been recently shown to be active for photocatalytic degradation of methylene blue under UV-–irradiation, indicating that photo-excited electrons and holes can effectively be generated and separated in this material. However, CHP has not been well studied and many of its fundamental electrochemical and photoelectrochemical properties are still unknown. In this work, the synthesis of different morphologies of CHP using hydrothermal synthesis and precipitation methods were explored. Additionally, a preliminary investigation of the relevant fundamental characteristics such as the bandgap, flatband potential, band diagram, electrochemical and photoelectrochemical properties for CHP was performed. Better understanding of the properties of this material may lead to the development of improved catalysts and photocatalysts from natural sources.
ContributorsLi, Man (Author) / Chan, Candace K. (Thesis advisor) / O'Connell, Michael (Committee member) / Crozier, Peter (Committee member) / Arizona State University (Publisher)
Created2013
Description
While acceptance towards same-sex marriage is gradually increasing, same-sex marriage is banned in many states within the United States. Laws that prohibit same-sex couples from marrying have been shown to increase feelings of depression, exclusion, and stigma for same-sex attracted individuals. The intention of this study was to explore the effect both pro- and anti-same-sex marriage advertisements have on heterosexual individuals' implicit attitudes towards same-sex couples. It was predicted that exposure to anti-same-sex advertisements would lead to viewing same-sex couples as more unpleasant and heterosexual couples as being more pleasant. However, heterosexual participants who viewed anti-same-sex marriage ads were more likely to rate heterosexual couples as being unpleasant and same-sex couples as pleasant. It is theorized that viewing anti-same-sex marriage advertisements led heterosexual individuals to report heterosexual stimuli as being more unpleasant compared to same-sex stimuli as a form of defensive processing.
ContributorsWalsh, Theodora Michelle (Author) / Newman, Matt (Thesis advisor) / Hall, Deborah (Committee member) / Salerno, Jessica (Committee member) / Arizona State University (Publisher)
Created2013
Description
Incidental learning of sequential information occurs in visual, auditory and tactile domains. It occurs throughout our lifetime and even in nonhuman species. It is likely to be one of the most important foundations for the development of normal learning. To date, there is no agreement as to how incidental learning occurs. The goal of the present set of experiments is to determine if visual sequential information is learned in terms of abstract rules or stimulus-specific details. Two experiments test the extent to which interaction with the stimuli can influence the information that is encoded by the learner. The results of both experiments support the claim that stimulus and domain specific details directly shape what is learned, through a process of tuning the neuromuscular systems involved in the interaction between the learner and the materials.
ContributorsMarsh, Elizabeth R (Author) / Glenberg, Arthur M. (Thesis advisor) / Amazeen, Eric (Committee member) / Brewer, Gene (Committee member) / Arizona State University (Publisher)
Created2013
Description
Bully victimization has been associated with blunted cardiovascular responses to stress as well as elevated responses to stress. The difference between these altered physiological responses to stress is largely unknown. This study explored several possible moderators to the relationship between chronic stress and future cardiac output (an indicator of increased stress) in response to future stressors. These moderators include the difference between social and physical stressors and individual levels of loneliness. Participants were administered measures of loneliness and victimization history, and led to anticipate either a "social" (recorded speech) or "non-social" (pain tolerance test ) stressor, neither of which occurred. EKG and impedance cardiography were measured throughout the session. When anticipating both stressors, loneliness and victimization were associated with increased CO. A regression revealed a three-way interaction, with change in cardiac output depending on victimization history, loneliness, and condition in the physical stressor condition. Loneliness magnified the CO output levels of non-bullied individuals when facing a physical stressor. These results suggest that non- bullied participants high in loneliness are more stressed out when facing stressors, particularly stressors that are physically threatening in nature.
ContributorsHaneline, Magen (Author) / Newman, Matt (Thesis advisor) / Salerno, Jessica (Committee member) / Miller, Paul (Committee member) / Arizona State University (Publisher)
Created2013
Description
Microwave dielectrics are widely used to make resonators and filters in telecommunication systems. The production of thin films with high dielectric constant and low loss could potentially enable a marked reduction in the size of devices and systems. However, studies of these materials in thin film form are very sparse. In this research, experiments were carried out on practical high-performance dielectrics including ZrTiO4-ZnNb2O6 (ZTZN) and Ba(Co,Zn)1/3Nb2/3O3 (BCZN) with high dielectric constant and low loss tangent. Thin films were deposited by laser ablation on various substrates, with a systematical study of growth conditions like substrate temperature, oxygen pressure and annealing to optimize the film quality, and the compositional, microstructural, optical and electric properties were characterized. The deposited ZTZN films were randomly oriented polycrystalline on Si substrate and textured on MgO substrate with a tetragonal lattice change at elevated temperature. The BCZN films deposited on MgO substrate showed superior film quality relative to that on other substrates, which grow epitaxially with an orientation of (001) // MgO (001) and (100) // MgO (100) when substrate temperature was above 500 oC. In-situ annealing at growth temperature in 200 mTorr oxygen pressure was found to enhance the quality of the films, reducing the peak width of the X-ray Diffraction (XRD) rocking curve to 0.53o and the χmin of channeling Rutherford Backscattering Spectrometry (RBS) to 8.8% when grown at 800oC. Atomic Force Microscopy (AFM) was used to study the topography and found a monotonic decrease in the surface roughness when the growth temperature increased. Optical absorption and transmission measurements were used to determine the energy bandgap and the refractive index respectively. A low-frequency dielectric constant of 34 was measured using a planar interdigital measurement structure. The resistivity of the film is ~3×1010 ohm·cm at room temperature and has an activation energy of thermal activated current of 0.66 eV.
ContributorsLi, You (Author) / Newman, Nathan (Thesis advisor) / Alford, Terry (Committee member) / Singh, Rakesh (Committee member) / Arizona State University (Publisher)
Created2013
Description
The development of self-regulation is believed to play a crucial role in predicting later psychopathology and is believed to begin in early childhood. The early postpartum period is particularly important in laying the groundwork for later self-regulation as infants' dispositional traits interact with caregivers' co-regulatory behaviors to produce the earliest forms of self-regulation. Moreover, although emerging literature suggests that infants' exposure to maternal stress even before birth may be integral in determining children's self-regulatory capacities, the complex pathways that characterize these developmental processes remain unclear. The current study considers the complex, transactional processes in a high-risk, Mexican American sample. Data were collected from 305 Mexican American infants and their mothers during prenatal, 6- and 12-week home interviews. Mother self-reports of stress were obtained prenatally between 34-37 weeks gestation. Mother reports of infant temperamental negativity and surgency were obtained at 6-weeks as were observed global ratings of maternal sensitivity during a structured peek-a-boo task. Microcoded ratings of infants' engagement orienting and self-comforting behaviors were obtained during the 12-week peek-a-boo task. Study findings suggest that self-comforting and orienting behaviors help to modulate infants' experiences of distress, and also that prenatal stress influences infants' engagement in each of those regulatory behaviors, both directly by influence tendencies to engage in orienting behaviors and indirectly by programming higher levels of infant negativity and surgency, both of which may confer risk for later regulatory disadvantage. Advancing our understandings about the nature of these developmental pathways could have significant implications for targets of early intervention in this high-risk population.
ContributorsLin, Betty (Author) / Crnic, Keith A (Thesis advisor) / Lemery-Chalfant, Kathryn S (Committee member) / Mackinnon, David P (Committee member) / Arizona State University (Publisher)
Created2013
Description
The purpose of the current study was to use structural equation modeling-based quantitative genetic models to characterize latent genetic and environmental influences on proneness to three discrete negative emotions in middle childhood, according to mother-report, father-report and in-home observation. One primary aim was to test the extent to which covariance among the three emotions could be accounted for by a single, common genetically- and environmentally-influenced negative emotionality factor. A second aim was to examine the extent to which different reporters appeared to be tapping into the same genetically- and environmentally-influenced aspects of each emotion. According to mother- and father-report, moderate to high genetic influences were evident for all emotions, with mother- and father-report of fear and father-report of anger showing the highest heritability. Significant common environmental influences were also found for mother-report of anger and sadness in both univariate and multivariate models. For observed emotion, anger was moderately heritable with no evidence for common environmental variance, but sadness, object fear and social fear all showed modest to moderate common environmental influences and no significant genetic variance. In addition, cholesky decompositions examining genetic and environmental influences across reporter suggested that despite considerable overlap between mother-report and father-report, there was also reporter-specific variance on anger, sadness, and fear. Specifically, there were significant common environmental influences on mother-report of anger- and sadness that were not shared with father-report, and genetic influences on father-report of sadness and fear that were not shared with mother-report. In-home observations were not highly correlated enough with parent-report to support multivariate analysis for any emotion. Finally, according to both mother- and father-report, a single set of genetic and environmental influences was sufficient to account for covariance among all three negative emotions. However, fear was primarily explained by genetic influences not shared with other emotions, and anger also showed considerable emotion-specific genetic variance. In both cases, findings support the value of a more emotion-specific approach to temperament, and highlight the need to consider distinctions as well as commonalities across emotions, reporters and situations.
ContributorsClifford, Sierra (Author) / Lemery, Kathryn (Thesis advisor) / Shiota, Michelle (Committee member) / Eisenberg, Nancy (Committee member) / Arizona State University (Publisher)
Created2013
Description
This research examines the current challenges of using Lamb wave interrogation methods to localize fatigue crack damage in a complex metallic structural component subjected to unknown temperatures. The goal of this work is to improve damage localization results for a structural component interrogated at an unknown temperature, by developing a probabilistic and reference-free framework for estimating Lamb wave velocities and the damage location. The methodology for damage localization at unknown temperatures includes the following key elements: i) a model that can describe the change in Lamb wave velocities with temperature; ii) the extension of an advanced time-frequency based signal processing technique for enhanced time-of-flight feature extraction from a dispersive signal; iii) the development of a Bayesian damage localization framework incorporating data association and sensor fusion. The technique requires no additional transducers to be installed on a structure, and allows for the estimation of both the temperature and the wave velocity in the component. Additionally, the framework of the algorithm allows it to function completely in an unsupervised manner by probabilistically accounting for all measurement origin uncertainty. The novel algorithm was experimentally validated using an aluminum lug joint with a growing fatigue crack. The lug joint was interrogated using piezoelectric transducers at multiple fatigue crack lengths, and at temperatures between 20°C and 80°C. The results showed that the algorithm could accurately predict the temperature and wave speed of the lug joint. The localization results for the fatigue damage were found to correlate well with the true locations at long crack lengths, but loss of accuracy was observed in localizing small cracks due to time-of-flight measurement errors. To validate the algorithm across a wider range of temperatures the electromechanically coupled LISA/SIM model was used to simulate the effects of temperatures. The numerical results showed that this approach would be capable of experimentally estimating the temperature and velocity in the lug joint for temperatures from -60°C to 150°C. The velocity estimation algorithm was found to significantly increase the accuracy of localization at temperatures above 120°C when error due to incorrect velocity selection begins to outweigh the error due to time-of-flight measurements.
ContributorsHensberry, Kevin (Author) / Chattopadhyay, Aditi (Thesis advisor) / Liu, Yongming (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2013
Description
Ingestion of high temperature mainstream gas into the rotor-stator cavities of a gas turbine is one of the major problems faced by the turbine designers. The ingested gas heats up rotor disks and induces higher thermal stresses on them, giving rise to durability concern. Ingestion is usually reduced by installing seals on the rotor and stator rims and by purging the disk cavity by secondary air bled from the compressor discharge. The geometry of the rim seals and the secondary air flow rate, together, influence the amount of gas that gets ingested into the cavities. Since the amount of secondary air bled off has a negative effect on the gas turbine thermal efficiency, one goal is to use the least possible amount of secondary air. This requires a good understanding of the flow and ingestion fields within a disk cavity. In the present study, the mainstream gas ingestion phenomenon has been experimentally studied in a model single-stage axial flow gas turbine. The turbine stage featured vanes and blades, and rim seals on both the rotor and stator. Additionally, the disk cavity contained a labyrinth seal radially inboard which effectively divided the cavity into a rim cavity and an inner cavity. Time-average static pressure measurements were obtained at various radial positions within the disk cavity, and in the mainstream gas path at three axial locations at the outer shroud spread circumferentially over two vane pitches. The time-average static pressure in the main gas path exhibited a periodic asymmetry following the vane pitch whose amplitude diminished with increasing distance from the vane trailing edge. The static pressure distribution increased with the secondary air flow rate within the inner cavity but was found to be almost independent of it in the rim cavity. Tracer gas (CO2) concentration measurements were conducted to determine the sealing effectiveness of the rim seals against main gas ingestion. For the rim cavity, the sealing effectiveness increased with the secondary air flow rate. Within the inner cavity however, this trend reversed -this may have been due to the presence of rotating low-pressure flow structures inboard of the labyrinth seal.
ContributorsThiagarajan, Jayanth kumar (Author) / Roy, Ramendra P (Thesis advisor) / Lee, Taewoo (Committee member) / Mignolet, Marc (Committee member) / Arizona State University (Publisher)
Created2013