Matching Items (14)
Filtering by
- Creators: Arizona State University
Description
The Santa Cruz River, in southern Arizona, receives steady inputs of nutrient-enriched treated wastewater (effluent). Previous studies have documented reduced infiltration of surface water in the river. This disruption of hydrologic connectivity, or clogging, can have consequences for groundwater recharge, flows of wastewater in unwanted locations, and potentially even survivorship of floodplain riparian vegetation. Clogging can result from biotic processes (microbial or algal growth), abiotic processes (siltation of interstitial spaces), or both. Little is known about clogging in rivers and the environmental factors that regulate their dynamics, so natural field experiments along the Santa Cruz and San Pedro Rivers were used to answer: 1) Are there spatial patterns of hydraulic conductivity in the riverbed downstream from the effluent point-source? 2) Is there temporal variability in hydraulic conductivity and microbial abundance associated with flooding? 3) Are there environmental variables, such as nutrients or stream flow, related to differences in hydraulic conductivity and microbial abundance? To address these questions, a series of sites at increasing distance from two municipal effluent discharge points with differing water quality were selected on the Santa Cruz River and compared with non-effluent control reaches of the San Pedro River. Physical, chemical, and biological parameters were monitored over one year to capture seasonal changes and flood cycles.
ContributorsCase, Natalie (Author) / Stromberg, Juliet (Thesis advisor) / Rock, Channah (Committee member) / Meixner, Thomas (Committee member) / Arizona State University (Publisher)
Created2012
Description
As the use of engineered nanomaterials (ENMs) in consumer products becomes more common, the amount of ENMs entering wastewater treatment plants (WWTPs) increases. Investigating the fate of ENMs in WWTPs is critical for risk assessment and pollution control. The objectives of this dissertation were to (1) quantify and characterize titanium (Ti) in full-scale wastewater treatment plants, (2) quantify sorption of different ENMs to wastewater biomass in laboratory-scale batch reactors, (3) evaluate the use of a standard, soluble-pollutant sorption test method for quantifying ENM interaction with wastewater biomass, and (4) develop a mechanistic model of a biological wastewater treatment reactor to serve as the basis for modeling nanomaterial fate in WWTPs. Using titanium (Ti) as a model material for the fate of ENMs in WWTPs, Ti concentrations were measured in 10 municipal WWTPs. Ti concentrations in pant influent ranged from 181 to 3000 µg/L, and more than 96% of Ti was removed, with effluent Ti concentrations being less than 25 µg/L. Ti removed from wastewater accumulated in solids at concentrations ranging from 1 to 6 µg Ti/mg solids. Using transmission electron microscopy, spherical titanium oxide nanoparticles with diameters ranging from 4 to 30 nm were found in WWTP effluents, evidence that some nanoscale particles will pass through WWTPs and enter aquatic systems. Batch experiments were conducted to quantify sorption of different ENM types to activated sludge. Percentages of sorption to 400 mg TSS/L biomass ranged from about 10 to 90%, depending on the ENM material and functionalization. Natural organic matter, surfactants, and proteins had a stabilizing effect on most of the ENMs tested. The United States Environmental Protection Agency's standard sorption testing method (OPPTS 835.1110) used for soluble compounds was found to be inapplicable to ENMs, as freeze-dried activated sludge transforms ENMs into stable particles in suspension. In conjunction with experiments, we created a mechanistic model of the microbiological processes in membrane bioreactors to predict MBR, extended and modified this model to predict the fate of soluble micropollutants, and then discussed how the micropollutant fate model could be used to predict the fate of nanomaterials in wastewater treatment plants.
ContributorsKiser, Mehlika Ayla (Author) / Westerhoff, Paul K (Thesis advisor) / Rittmann, Bruce E. (Committee member) / Hristovski, Kiril D (Committee member) / Arizona State University (Publisher)
Created2011
Description
Microscopic algae have been investigated extensively by researchers for decades for their ability to bioremediate wastewater and flue gas while producing valuable biomass for use as feed, fuel, fertilizer, nutraceutical, and other specialty products. Reports of the exciting commercial potential of this diverse group of organisms started appearing in the literature as early as the 1940’s. However, nearly 80 years later, relatively few successful commercial microalgae installations exist and algae have not yet reached agricultural commodity status. This dissertation examines three major bottlenecks to commercial microalgae production including lack of an efficient and economical cultivation strategy, poor management of volatile waste nutrients, and costly harvesting and post processing strategies. A chapter is devoted to each of these three areas to gain a better understanding of each bottleneck as well as strategies for overcoming them.
The first chapter demonstrates the capability of two strains of Scenedesmus acutus to grow in ultra-high-density (>10 g L-1 dry weight biomass) cultures in flat panel photobioreactors for year-round production in the desert Southwest with record volumetric biomass productivity. The advantages and efficiency of high-density cultivation are discussed. The second chapter focuses on uptake and utilization of the volatile components of wastewater: ammonia and carbon dioxide. Scenedesmus acutus was cultured on wastewater from both municipal and agricultural origin and was shown to perform significantly better on flue gas as compared to commercial grade CO2 and just as well on waste nutrients as the commonly used BG-11 laboratory culture media, all while producing up to 50% lipids of the dry weight biomass suitable for use in biodiesel. The third chapter evaluates the feasibility of using gravity sedimentation for the harvesting of the difficult-to-separate Scenedesmus acutus green algae biomass followed by microfluidization to disrupt the cells. Lipid-extracted biomass was then studied as a fertilizer for plants and shown to have similar performance to a commercially available 4-6-6 fertilizer. Based on the work from these three chapters, a summary of modifications are suggested to help current and future microalgae companies be more competitive in the marketplace with traditional agricultural commodities.
The first chapter demonstrates the capability of two strains of Scenedesmus acutus to grow in ultra-high-density (>10 g L-1 dry weight biomass) cultures in flat panel photobioreactors for year-round production in the desert Southwest with record volumetric biomass productivity. The advantages and efficiency of high-density cultivation are discussed. The second chapter focuses on uptake and utilization of the volatile components of wastewater: ammonia and carbon dioxide. Scenedesmus acutus was cultured on wastewater from both municipal and agricultural origin and was shown to perform significantly better on flue gas as compared to commercial grade CO2 and just as well on waste nutrients as the commonly used BG-11 laboratory culture media, all while producing up to 50% lipids of the dry weight biomass suitable for use in biodiesel. The third chapter evaluates the feasibility of using gravity sedimentation for the harvesting of the difficult-to-separate Scenedesmus acutus green algae biomass followed by microfluidization to disrupt the cells. Lipid-extracted biomass was then studied as a fertilizer for plants and shown to have similar performance to a commercially available 4-6-6 fertilizer. Based on the work from these three chapters, a summary of modifications are suggested to help current and future microalgae companies be more competitive in the marketplace with traditional agricultural commodities.
ContributorsWray, Joshua (Author) / Dempster, Thomas (Thesis advisor) / Roberson, Robert (Thesis advisor) / Bingham, Scott (Committee member) / Neuer, Susanne (Committee member) / Arizona State University (Publisher)
Created2019
Description
Monitoring human exposure to chemicals posing public health threats is critically important for risk management and for informing regulatory actions. Chemical threats result from both environmental pollutants and elected substance use (e.g., consumption of drugs, alcohol and tobacco). Measuring chemical occurrence and concentrations in environmental matrices can help to pinpoint human exposure routes. For instance, indoor dust, a sink of indoor environmental contaminants, can serve to assess indoor air contamination and associated human exposures. Urban wastewater arriving at treatment plants contains urine and stool from the general population, the analysis of which can provide information on chemical threats in the community and ongoing harmful exposures. Analysis of sewage sludge can serve to reveal the identity and quantity of persistent organic pollutants in cities and inform estimates of toxic body burdens in local populations.
The objective of this dissertation was to investigate the occurrence and quantity of select, potentially harmful, anthropogenic chemicals in various environmental matrices and to explore the diagnostic value of analytical assays for informing public health decision-making. This dissertation (i) is the first to report spatio-temporal variations and estrogenic burdens of five parabens in sewage sludge from at the U.S. nationwide scale; (ii) represents the first China-wide survey to assess the occurrence and toxic emissions of parabens, triclosan, triclocarban, as well as triclocarban metabolites and transformation products contained in Chinese sewage sludge; (iii) documents the first use of a dispersive solid phase extraction method for indoor dust to measure dust-borne parabens, triclosan and triclocarban and estimating associated human exposures from dust ingestion; and (iv) is the first U.S. study to assess population-level alcohol and nicotine consumption in three U.S. communities using wastewater-based epidemiology (WBE). Obtained data on baseline levels of selected emerging contaminants in sewage sludge and indoor dust can serve to inform the future monitoring needs, risk assessment, and policy making. This work showcases the utility of WBE and urban metabolism metrology via dust and sewage sludge analysis to assess human behavior (e.g., drinking and smoking) and exposure risks more rapidly, efficiently and anonymously than traditional approaches can.
The objective of this dissertation was to investigate the occurrence and quantity of select, potentially harmful, anthropogenic chemicals in various environmental matrices and to explore the diagnostic value of analytical assays for informing public health decision-making. This dissertation (i) is the first to report spatio-temporal variations and estrogenic burdens of five parabens in sewage sludge from at the U.S. nationwide scale; (ii) represents the first China-wide survey to assess the occurrence and toxic emissions of parabens, triclosan, triclocarban, as well as triclocarban metabolites and transformation products contained in Chinese sewage sludge; (iii) documents the first use of a dispersive solid phase extraction method for indoor dust to measure dust-borne parabens, triclosan and triclocarban and estimating associated human exposures from dust ingestion; and (iv) is the first U.S. study to assess population-level alcohol and nicotine consumption in three U.S. communities using wastewater-based epidemiology (WBE). Obtained data on baseline levels of selected emerging contaminants in sewage sludge and indoor dust can serve to inform the future monitoring needs, risk assessment, and policy making. This work showcases the utility of WBE and urban metabolism metrology via dust and sewage sludge analysis to assess human behavior (e.g., drinking and smoking) and exposure risks more rapidly, efficiently and anonymously than traditional approaches can.
ContributorsChen, Jing (Author) / Halden, Rolf U. (Thesis advisor) / Borges, Chad R (Committee member) / Abbaszadegan, Morteza (Committee member) / Arizona State University (Publisher)
Created2018
Description
This thesis examines the use of the moisture swing resin materials employed at the Center for Negative Carbon Emissions (CNCE) in order to provide carbon dioxide from ambient air to photobioreactors containing extremophile cyanobacteria cultured at the Arizona Center for Algae Technology and Innovation (AzCATI). For this purpose, a carbon dioxide feeding device was designed, built, and tested. The results indicate how much resin should be used with a given volume of algae medium: approximately 500 grams of resin can feed 1% CO2 at about three liters per minute to a ten liter medium of the Galdieria sulphuraria 5587.1 strain for one hour (equivalent to about 0.1 grams of carbon dioxide per hour per seven grams of algae). Using the resin device, the algae grew within their normal growth range: 0.096 grams of ash-free dry weight per liter over a six hour period. Future applications in which the resin-to-algae process can be utilized are discussed.
ContributorsBeaubien, Courtney (Author) / Lackner, Klaus (Thesis advisor) / Lammers, Peter (Committee member) / Atkins, Steve (Committee member) / Arizona State University (Publisher)
Created2016
Description
The worldwide supply of potable fresh water is ever decreasing. While 2.5% of Earth's water is fresh, only 1% is accessible. Of this water, the World Health Organization estimates that only one-third can be used to meet our daily needs while the other two-thirds are unusable due to contamination. As the world population continues to grow and climate change reduces water security, we must consider not only solutions, but evaluate the perceptions and reactions of individuals in order to successfully implement such solutions. To that end, the goal of this dissertation is to explore human attitudes, beliefs, and behaviors around water issues by conducting cross-cultural comparisons of (1) water risks and solutions, (2) wastewater knowledge and acceptance, and (3) motivators for willingness to use treated wastewater. Previous research in these domains has primarily focused on a single site or national context. While such research is valuable for establishing how and why cultural context matters, comparative studies are also needed to help link perceptions at local and global scales. Adopting an interdisciplinary approach grounded in anthropological methods and theory, I use interview data collected in a range of international sites as part of the Arizona State University's Global Ethnohydrology Study. With funding from National Science Foundation grants to the Decision Center for a Desert City (DCDC) and the Central Arizona-Phoenix Long-Term Ecological Research project (CAP LTER), this dissertation explores cross-cultural perceptions of water threats and management strategies, specifically wastewater reclamation and reuse, in order to make recommendations for policy makers and water managers.
ContributorsStotts, Rhian (Author) / Wutich, Amber (Thesis advisor) / BurnSilver, Shauna (Committee member) / Grossman, Gary (Committee member) / White, Dave (Committee member) / Arizona State University (Publisher)
Created2016
Environmental releases of neonicotinoid and fipronil insecticides via U.S. wastewater infrastructure
Description
This dissertation is focused on environmental releases from U.S. wastewater infrastructure of recently introduced, mass-produced insecticides, namely neonicotinoids as well as fipronil and its major degradates (sulfone, sulfide, amide, and desulfinyl derivatives), jointly known as fiproles. Both groups of compounds recently have caught the attention of regulatory agencies worldwide due to their toxic effects on pollinators and on aquatic invertebrates at very low, part-per-trillion levels (Chapter 1). Mass balance studies conducted for 13 U.S. wastewater treatment plants (WWTPs) showed ubiquitous occurrence (3-666 ng/L) and persistence of neonicotinoids (Chapter 2). For the years 2001 through 2016, a longitudinal nationwide study was conducted on the occurrence of fiproles, via analysis of sludge as well as raw and treated wastewater samples. Sludge analysis revealed ubiquitous fiprole occurrence since 2001 (0.2-385 µg/kg dry weight) and a significant increase (2.4±0.3-fold; p<0.005) to elevated levels found both in 2006/7 and 2015/6. This study established a marked persistence of fiproles during both wastewater and sludge treatment, while also identifying non-agricultural uses as a major source of fiprole loading to wastewater (Chapter 3). Eight WWTPs were monitored in Northern California to assess pesticide inputs into San Francisco Bay from wastewater discharge. Per-capita-contaminant-loading calculations identified flea and tick control agents for use on pets as a previously underappreciated source term dominating the mass loading of insecticides to WWTPs in sewage and to the Bay in treated wastewater (Chapter 4). A nationwide assessment of fipronil emissions revealed that pet products, while representing only 22±7% of total fipronil usage (2011-2015), accounted for 86±5% of the mass loading to U.S. surface waters (Chapter 5). In summary, the root cause for considerable annual discharges into U.S. surface waters of the neonicotinoid imidacloprid (3,700-5,500 kg/y) and of fipronil related compounds (1,600-2,400 kg/y) is domestic rather than agricultural insecticide use. Reclaimed effluent from U.S. WWTPs contained insecticide levels that exceed toxicity benchmarks for sensitive aquatic invertebrates in 83% of cases for imidacloprid and in 67% of cases for fipronil. Recommendations are provided on how to limit toxic inputs in the future.
ContributorsSadaria, Akash Mahendra (Author) / Halden, Rolf (Thesis advisor) / Fraser, Matthew (Committee member) / Perreault, Francois (Committee member) / Mascaro, Giuseppe (Committee member) / Arizona State University (Publisher)
Created2017
Description
Pathogens can proliferate in the built environment and can cause disease outbreaks if water and wastewater are not properly managed. Understanding pathogens that grow in engineered systems is crucial to protecting public health and preventing disease. Using dynamic computational models can reveal mechanistic insights into these systems to aid in understanding risk drivers and determining risk management strategies. The first research chapter of this thesis investigates tradeoffs for reducing the cost associated with Legionnaire’s Disease, hot water scalding, and energy use using a computational framework for evaluating an optimal water heater temperature set point. The model demonstrated that the optimal temperature set point was highly dependent on assumptions made regarding the dose response parameter for a common configuration of an electric water heater in a hospital setting. The optimal temperature was 55°C or 48°C for subclinical vs. clinical severity dose response, respectively, compared with current recommendations of 60°C to kill bacteria and 49°C to prevent scalding and conserve energy.
The second research chapter models the population dynamics of antibiotic-susceptible Escherichia coli (E. coli) and antibiotic-resistant E. coli with a population ecology-exposure assessment model in surface water to quantify the risk of urinary tract infection from recreational swimming activities. Horizontal gene transfer (HGT) was modeled in the environment and the human gastrointestinal tract for several scenarios. HGT was generally not a dominant driver of exposure estimates compared to other factors such as growth and dilution, however, the rank order of factors was scenario-dependent.
The final research chapter models pathogen transport from wastewater treatment plant (WWTP) exposures and assesses the risk to workers based on several exposure scenarios. Case studies were performed to investigate infection risk drivers across different scenarios, including adjustments for the timing of exposure and personal protective equipment. A web application was developed for use by WWTP risk managers to be used with site-specific data.
The proposed modeling frameworks identified risk drivers across several microbial risk scenarios and provide flexible tools for risk managers to use when making water treatment and use decisions for water management plans used for premise plumbing as well as for wastewater treatment practices.
ContributorsHeida, Ashley (Author) / Hamilton, Kerry (Thesis advisor) / Garcia, Margared (Committee member) / Muenich, Rebecca (Committee member) / Wilson, Amanda (Committee member) / Arizona State University (Publisher)
Created2023
Description
Corrosion is known to have severe infrastructure integrity implications in a broad range of industries including water and wastewater treatment and reclamation. In the U.S. alone, the total losses due to corrosion in drinking water and wastewater systems can account for economic losses as high as $80 billion dollars a year. Microbially induced corrosion is a complex phenomenon which involve various phases; 1) formation of biofilms on submerged surfaces, 2) creation of micro-environmental niches associated with biofilm growth, 3) altered availability nutrients, 4) changes in the pH and oxygen concentrations. Biofilms can harbor opportunistic or pathogenic bacteria for a long time increasing the risk of pathogen exposure for the end users. The focus of this thesis research was to study the kinetics of microbially induced corrosion of various materials in water and reclaimed water systems. The specific objective was to assess the biofilms formation potential on stainless steel 304, stainless steel 316, galvanized steel, copper, cPVC, glass, carbon steel, and cast iron in water and reclaimed water systems. Experiments were conducted using bioreactor containers, each bioreactor housed four sampling boxes with eight partitions, dedicated to each material type coupon. One bioreactor was stationed at ASU, and one at Vistancia Aquifer Storage and Recovery (ASR) well; while three bioreactors were stationed at Butler facility, at pre-disinfection, post-UV and post-chlorination. From each location, one submerged sampling box was retrieved after 1, 3, 6 and 12 months. Time series of biofilm samples recovered from various types of coupons from different locations were analyzed using physical and culture-based techniques for quantification of biofilms and detection of heterotrophic plate count (HPC) bacteria, Legionella, Mycobacterium, and sulfate reducing bacteria (SRB).
After one-year, galvanized steel had the highest concentration of HPC at 4.27 logs while copper had the lowest concentration of 3.08 logs of HPC. Bacterial growth data collected from the SRB tests was compiled to develop a numerical matrix using growth potential, biofilm formation potential and metal reduction potential of SRB isolates. This risk assessment matrix can be a useful tool for the water industry to evaluate the potential risk of MIC in their systems.
ContributorsNeal, Amber (Author) / Abbaszadegan, Morteza (Thesis advisor) / Fox, Peter (Committee member) / Alum, Absar (Committee member) / Arizona State University (Publisher)
Created2022
Description
Plastic pollution has become a global threat to ecosystems worldwide, with microplastics now representing contaminants reported to occur in ambient air, fresh water, seawater, soils, fauna and people. Over time, larger macro-plastics are subject to weathering and fragmentation, resulting in smaller particles, termed ‘microplastics’ (measuring < 5 mm in diameter), which have been found to pollute virtually every marine and terrestrial ecosystem on the planet. This thesis explored the transfer of plastic pollutants from consumer products into the built water environment and ultimately into global aquatic and terrestrial ecosystems.
A literature review demonstrated that municipal sewage sludge produced by wastewater treatment plants around the world contains detectable quantities of microplastics. Application of sewage sludge on land was shown to represent a mechanism for transfer of microplastics from wastewater into terrestrial environments, with some countries reporting as high as 113 ± 57 microplastic particles per gram of dry sludge.
To address the notable shortcoming of inconsistent reporting practices for microplastic pollution, this thesis introduced a novel, online calculator that converts the number of plastic particles into the unambiguous metric of mass, thereby making global studies on microplastic pollution directly comparable.
This thesis concludes with an investigation of a previously unexplored and more personal source of plastic pollution, namely the disposal of single-use contact lenses and an assessment of the magnitude of this emerging source of environmental pollution. Using an online survey aimed at quantifying trends with the disposal of lenses in the US, it was discovered that 20 ± 0.8% of contact lens wearers flushed their used lenses down the drain, amounting to 44,000 ± 1,700 kg y-1 of lens dry mass discharged into US wastewater.
From the results it is concluded that conventional and medical microplastics represent a significant global source of pollution and a long-term threat to ecosystems around the world. Recommendations are provided on how to limit the entry of medical microplastics into the built water environment to limit damage to ecosystems worldwide.
A literature review demonstrated that municipal sewage sludge produced by wastewater treatment plants around the world contains detectable quantities of microplastics. Application of sewage sludge on land was shown to represent a mechanism for transfer of microplastics from wastewater into terrestrial environments, with some countries reporting as high as 113 ± 57 microplastic particles per gram of dry sludge.
To address the notable shortcoming of inconsistent reporting practices for microplastic pollution, this thesis introduced a novel, online calculator that converts the number of plastic particles into the unambiguous metric of mass, thereby making global studies on microplastic pollution directly comparable.
This thesis concludes with an investigation of a previously unexplored and more personal source of plastic pollution, namely the disposal of single-use contact lenses and an assessment of the magnitude of this emerging source of environmental pollution. Using an online survey aimed at quantifying trends with the disposal of lenses in the US, it was discovered that 20 ± 0.8% of contact lens wearers flushed their used lenses down the drain, amounting to 44,000 ± 1,700 kg y-1 of lens dry mass discharged into US wastewater.
From the results it is concluded that conventional and medical microplastics represent a significant global source of pollution and a long-term threat to ecosystems around the world. Recommendations are provided on how to limit the entry of medical microplastics into the built water environment to limit damage to ecosystems worldwide.
ContributorsRolsky, Charles (Author) / Halden, Rolf (Thesis advisor) / Green, Matthew (Committee member) / Neuer, Susanne (Committee member) / Polidoro, Beth (Committee member) / Smith, Andrew (Committee member) / Arizona State University (Publisher)
Created2020