Optimizing cathodes for microbial fuel cells is important to maximize energy harvested from wastewater. Cathodes were made by modifying a recipe from previous literature and testing the current of the cathode using linear sweep voltammetry. The cathodes contained an Fe-N-C catalyst combined with a Polytetrafluoroethylene binder. Optimizing the power resulting from the microbial fuel cells will help MFCs be an alternative energy source to fossil fuels. The new cathodes did improve in current production from −16 𝐴/𝑚 to −37 𝐴/𝑚 at -0.4 V. When fitted using a Butler-Volmer model, the cathode linear-sweep voltammograms did not follow the expected exponential trend. These results show a need for more research on the cathodes and the Butler-Volmer model, and they also show that the cathode is ready for further and longer application in a microbial fuel cell.

Anaerobic Digestion (AD) typically stabilizes 40-60% of influent wastewater sludge. Improving the methane yield in wastewater may produce enough energy to power some wastewater treatment processes, while the production of volatile-fatty acids (VFAs) generates economic incentives for yard waste pre-fermentation. In this research, pre-fermenters consisting of inocula composed of media; cellulose, lantana, or grass; and rabbit cecotrope were fed various concentrations of plant matter. The contents of these pre-fermenters were the influent for respective anaerobic digesters. The microbial consortium derived for the lignocellulosic pretreatment with common yard waste in Arizona successfully increased methane production in AD, while producing additional VFAs during pretreatment in all systems. The performance of the system appeared to depend on plant matter loading and operating time, with a higher plant loading increasing the VFA production and a longer operating time increasing soluble chemical oxygen demand (COD) in pre-fermentation, and therefore the methane production in AD increased. The pre-fermenter with the highest plant matter loading and longest operating time –1.44 g plant matter per day at a 9.6% influent concentration and 193 days of total operating time– produced 10,000 mg COD/L of VFA, and its reactor produced about 460 mL methane (CH4) per day, which was almost twice the production of the control AD at 250 mL CH4 per day. This research uses yard waste that would previously be disposed of in landfill to increase valuable product production in AD. The potential value added to wastewater treatment plant (WWTP) processes by these methods could incentivize the expansion of wastewater treatment, thereby increasing sanitation access. The use of net-neutral biogas as a fuel source for WWTPs is additionally an incremental solution for reducing carbon equivalents present in the atmosphere, thereby reducing the greenhouse gas effect.

The Future of Wastewater Sensing workshop is part of a collaboration between Arizona State University Center for Nanotechnology in Society in the School for the Future of Innovation in Society, the Biodesign Institute’s Center for Environmental Security, LC Nano, and the Nano-enabled Water Treatment (NEWT) Systems NSF Engineering Research Center. The Future of Wastewater Sensing workshop explores how technologies for studying, monitoring, and mining wastewater and sewage sludge might develop in the future, and what consequences may ensue for public health, law enforcement, private industry, regulations and society at large. The workshop pays particular attention to how wastewater sensing (and accompanying research, technologies, and applications) can be innovated, regulated, and used to maximize societal benefit and minimize the risk of adverse outcomes, when addressing critical social and environmental challenges.