Matching Items (107)
Filtering by
- Creators: Barrett, The Honors College
Description
Lossy compression is a form of compression that slightly degrades a signal in ways that are ideally not detectable to the human ear. This is opposite to lossless compression, in which the sample is not degraded at all. While lossless compression may seem like the best option, lossy compression, which is used in most audio and video, reduces transmission time and results in much smaller file sizes. However, this compression can affect quality if it goes too far. The more compression there is on a waveform, the more degradation there is, and once a file is lossy compressed, this process is not reversible. This project will observe the degradation of an audio signal after the application of Singular Value Decomposition compression, a lossy compression that eliminates singular values from a signal’s matrix.
ContributorsHirte, Amanda (Author) / Kosut, Oliver (Thesis director) / Bliss, Daniel (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
The implementation of a farmers market on the Arizona State University Tempe campus would benefit student helath, the local community, and the environment. A 2009 survey of university students states that "over 60 percent [of students] eat two or fewer servings of fruits and vegetables a day," which falls below the health standard. A campus farmers market would give students easier access to fresh produce. Through purchasing products from local vendors, students will establish better connections with the community while supporting the local economy. In addition, farmers markets encourage sustainable practices. According to a survey conducted by Farmers Markets Today, "85% of farmers market vendors traveled fewer than 50 miles to sell at a famers market [while]... nationwide, food travels an average of 1,500 miles before reaching its consumer." Thus, greenhouse gas emissions can be significantly reduced through purchasing local products. The purposes of a campus farmers market act in conjunction with ASU's intentions to become a New American University, which values students' well-being, the local community, and sustainability.
ContributorsSienicki, Joey (Author) / Van Fleet, David (Thesis director) / Bronowitz, Jason (Committee member) / Smith, Emily (Committee member) / Barrett, The Honors College (Contributor)
Created2010-05
Description
Abstract Knit Together: Craft, Community, and Victims of Domestic Violence Allison Miller Domestic violence shelters play a major role in victim's pathway to survivorship. Through an account of what constitutes domestic violence, who experiences domestic violence, data accumulated on domestic violence, and overview of domestic violence shelters and programs, and a snapshot view of a local domestic violence shelter in Phoenix, Arizona, this paper seeks to define and address the gaps in research involving victim's roads to survivorship, specifically as they involve community building, empowerment, and avenues for stress release. Finally, the project records the researcher's experiences and observations of a knitting and crochet group established in the local shelter.
ContributorsMiller, Allison (Author) / Durfee, Alesha (Thesis director) / Weitz, Rose (Committee member) / Noble, Virginia (Committee member) / Barrett, The Honors College (Contributor)
Created2012-05
Description
The world of a hearing impaired person is much different than that of somebody capable of discerning different frequencies and magnitudes of sound waves via their ears. This is especially true when hearing impaired people play video games. In most video games, surround sound is fed through some sort of digital output to headphones or speakers. Based on this information, the gamer can discern where a particular stimulus is coming from and whether or not that is a threat to their wellbeing within the virtual world. People with reliable hearing have a distinct advantage over hearing impaired people in the fact that they can gather information not just from what is in front of them, but from every angle relative to the way they're facing. The purpose of this project was to find a way to even the playing field, so that a person hard of hearing could also receive the sensory feedback that any other person would get while playing video games To do this, visual surround sound was created. This is a system that takes a surround sound input, and illuminates LEDs around the periphery of glasses based on the direction, frequency and amplitude of the audio wave. This provides the user with crucial information on the whereabouts of different elements within the game. In this paper, the research and development of Visual Surround Sound is discussed along with its viability in regards to a deaf person's ability to learn the technology, and decipher the visual cues.
ContributorsKadi, Danyal (Co-author) / Burrell, Nathaneal (Co-author) / Butler, Kristi (Co-author) / Wright, Gavin (Co-author) / Kosut, Oliver (Thesis director) / Bliss, Daniel (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2015-05
Description
The Latino population is the fastest growing minority group in the United States (U.S Census Bureau, 2003). Such a rapidly changing demographic stresses the importance of implementing strategies into the community social framework to accommodate for cultural and language differences. This research paper seeks to answer: what factors influence the sense of community among Latino families in Phoenix? The following questions will help to assess the dynamic relationship between sense of community and literacy 1) what is the perceived importance of literacy among Latino families living in Phoenix? 2) How is language development reflected among the family dynamics within a predominantly collectivist culture? It is hypothesized that both collectivism and literacy are the main influences on sense of community among this population.
ContributorsBennett, Julie (Author) / Glenberg, Arthur (Thesis director) / Restrepo, Laida (Committee member) / Barrett, The Honors College (Contributor) / School of Politics and Global Studies (Contributor) / School of International Letters and Cultures (Contributor)
Created2015-05
Description
The purpose of the solar powered quadcopter is to join together the growing technologies of photovoltaics and quadcopters, creating a single unified device where the technologies harmonize to produce a new product with abilities beyond those of a traditional battery powered drone. Specifically, the goal is to take the battery-only flight time of a quadcopter loaded with a solar array and increase that flight time by 33% with additional power provided by solar cells. The major concepts explored throughout this project are quadcopter functionality and capability and solar cell power production. In order to combine these technologies, the solar power and quadcopter components were developed and analyzed individually before connecting the solar array to the quadcopter circuit and testing the design as a whole. Several solar copter models were initially developed, resulting in multiple unique quadcopter and solar cell array designs which underwent preliminary testing before settling on a finalized design which proved to be the most effective and underwent final timed flight tests. Results of these tests are showing that the technologies complement each other as anticipated and highlight promising results for future development in this area, in particular the development of a drone running on solar power alone. Applications for a product such as this are very promising in many fields, including the industries of power, defense, consumer goods and services, entertainment, marketing, and medical. Also, becoming a more popular device for UAV hobbyists, such developments would be very appealing for leisure flying and personal photography purposes as well.
ContributorsMartin, Heather Catrina (Author) / Bowden, Stuart (Thesis director) / Aberle, James (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
Description
Every engineer is responsible for completing a capstone project as a culmination of accredited university learning to demonstrate technical knowledge and enhance interpersonal skills, like teamwork, communication, time management, and problem solving. This project, with three or four engineers working together in a group, emphasizes not only the importance of technical skills acquired through laboratory procedures and coursework, but the significance of soft skills as one transitions from a university to a professional workplace; it also enhances the understanding of an engineer's obligation to ethically improve society by harnessing technical knowledge to bring about change. The CC2541 Smart SensorTag is a device manufactured by Texas Instruments that focuses on the use of wireless sensors to create low energy applications, or apps; it is equipped with Bluetooth Smart, which enables it to communicate wirelessly with similar devices like smart phones and computers, assisting greatly in app development. The device contains six built-in sensors, which can be utilized to track and log personal data in real-time; these sensors include a gyroscope, accelerometer, humidifier, thermometer, barometer, and magnetometer. By combining the data obtained through the sensors with the ability to communicate wirelessly, the SensorTag can be used to develop apps in multiple fields, including fitness, recreation, health, safety, and more. Team SensorTag chose to focus on health and safety issues to complete its capstone project, creating applications intended for use by senior citizens who live alone or in assisted care homes. Using the SensorTag's ability to track multiple local variables, the team worked to collect data that verified the accuracy and quality of the sensors through repeated experimental trials. Once the sensors were tested, the team developed applications accessible via smart phones or computers to trigger an alarm and send an alert via vibration, e-mail, or Tweet if the SensorTag detects a fall. The fall detection service utilizes the accelerometer and gyroscope sensors with the hope that such a system will prevent severe injuries among the elderly, allow them to function more independently, and improve their quality of life, which is the obligation of engineers to better through their work.
ContributorsMartin, Katherine Julia (Author) / Thornton, Trevor (Thesis director) / Goryll, Michael (Committee member) / Electrical Engineering Program (Contributor) / School of Film, Dance and Theatre (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
Description
The apparent phenomenon of the human eye retaining images for fractions of a second after the light source has gone is known as Persistence of Vision. While its causes are not fully understood, it can be taken advantage of in order to create illusions which trick the mind into perceiving something which, in actuality, is very different from what the mind portrays. It has motivated many creative engineering technologies in the past and is the core for how we perceive motion in movies and animations. This project applies the persistence of vision concept to a lesser explored medium; the wheel of a moving bicycle. The motion of the wheel, along with intelligent control of discrete LEDs, create vibrant illusions of solid lines and shapes. These shapes make up the image to be displayed on the bike wheel. The rotation of the bike wheel can be compensated for in order to produce a standing image (or images) of the user's choosing. This thesis details how the mechanism for conducting the individual LEDs was created in order to produce a device which is capable of delivering colorful, standing images of the user's choosing.
ContributorsSaltwick, Ian Mark (Author) / Goryll, Michael (Thesis director) / Kozicki, Michael (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The Community Action Research Experiences (CARE) program collaborated with Singleton Moms, a local non-profit organization that provides financial, psychological, and social support services to single parents with cancer. The purpose of this action research project was to assess the volunteer program at Singleton Moms. Both past and present Singleton Moms' volunteers (N = 123; 87.0% female) completed an online survey assessing their motivation for volunteering and their satisfaction with the organization. A mixed ANOVA was conducted to identify the most important motivation and satisfaction domains and to see if the findings depended on whether the volunteers were current or past volunteers. For the motivation assessment, results indicated that the volunteers rate the cancer specific and moral/human kindness domains as the strongest reasons for motivating them to volunteer at Singleton Moms. In addition, results revealed that the social connection motivation domain was the only domain with differences between the ratings of the past and present volunteers. For the satisfaction assessment, results indicated that the volunteers rate the organizational climate domain as the most fulfilled area of satisfaction within the Singleton Moms' volunteer program. It was also revealed that there were no significant differences between the ratings of the past and present volunteers among all satisfaction domains. Both the quantitative and qualitative findings suggest that Singleton Moms' implications for action may include: 1) a volunteer database audit, 2) streamlining communications, 3) variability in volunteer times, and 4) bolstering volunteer motivation. Implementing some of these actions may help Singleton Moms increase volunteer motivation and satisfaction and thus create a more effective volunteer program. Ultimately, this may encourage volunteers to continue their services at Singleton Moms and thus help Singleton Moms expand their support programs and assist additional families.
ContributorsDubois, Courtney Michelle (Author) / Miller, Cindy (Thesis director) / Dumka, Larry (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor) / T. Denny Sanford School of Social and Family Dynamics (Contributor)
Created2016-05
Description
Traumatic brain injury (TBI) is a leading cause of injury related death in the United States. The complexity of the injury environment that follows TBI creates an incomplete understanding of all the mechanisms in place to regulate chemotactic responses to TBI. The goal of this project was to develop a predictive in silco model using diffusion and autocrine/paracrine signaling specific to stromal cell derived factor-1α (SDF-1α) gradient formation after TBI and compare this model with in vivo experimental data. A COMSOL model using Fickian diffusion and autocrine/paracrine reaction terms was generated to predict the gradient formation observed in vivo at three physiologically relevant time points (1, 3, and 7 days). In vivo data was gathered and analyzed via immunohistochemistry and MATLAB. The spatial distribution of SDF-1α concentration in vivo more consistently demonstrated patterns similar to the in silico model dependent on both diffusion and autocrine/paracrine reaction terms rather than diffusion alone. The temporal distribution of these same results demonstrated degradation of SDF-1α at too rapid a rate, compared to the in vivo results. To account for differences in behavior observed in vivo, reaction terms and constants of 1st-order reaction rates must be modulated to better reflect the results observed in vivo. These results from both the in silico model and in vivo data support the hypothesis that SDF-1α gradient formation after TBI depends on more than diffusion alone. Future work will focus on improving the model with constants that are specific to SDF-1α as well as testing methods to better control the degradation of SDF-1α.
ContributorsFreeman, Sabrina Louise (Author) / Stabenfeldt, Sarah (Thesis director) / Caplan, Michael (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05