Matching Items (3)
Filtering by
Description
As world energy demands increase, research into more efficient energy production methods has become imperative. Heterogeneous catalysis and nanoscience are used to promote chemical transformations important for energy production. These concepts are important in solid oxide fuel cells (SOFCs) which have attracted attention because of their potential to provide an efficient and environmentally favorable power generation system. The SOFC is also fuel-flexible with the ability to run directly on many fuels other than hydrogen. Internal fuel reforming directly in the anode of the SOFC would greatly reduce the cost and complexity of the device. Methane is the simplest hydrocarbon and a main component in natural gas, making it useful when testing catalysts on the laboratory scale. Nickel (Ni) and gadolinium (Gd) doped ceria (CeO2) catalysts for potential use in the SOFC anode were synthesized with a spray drying method and tested for catalytic performance using partial oxidation of methane and steam reforming. The relationships between catalytic performance and structure were then investigated using X-ray diffraction, transmission electron microscopy, and environmental transmission electron microscopy. The possibility of solid solutions, segregated phases, and surface layers of Ni were explored. Results for a 10 at.% Ni in CeO2 catalyst reveal a poor catalytic behavior while a 20 at.% Ni in CeO2 catalyst is shown to have superior activity. The inclusion of both 10 at.% Gd and 10 at.% Ni in CeO2 enhances the catalytic performance. Analysis of the presence of Ni in all 3 samples reveals Ni heterogeneity and little evidence for extensive solid solution doping. Ni is found in small domains throughout CeO2 particles. In the 20 at.% Ni sample a segregated, catalytically active NiO phase is observed. Overall, it is found that significant interaction between Ni and CeO2 occurs that could affect the synthesis and functionality of the SOFC anode.
ContributorsCavendish, Rio (Author) / Crozier, Peter (Thesis advisor) / Adams, James (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
This dissertation consists of three chapters that investigate the rapid adoption and complex implementation of city commitments to transition to 100% renewable energy (100RE). The first paper uses a two-stage, mixed methods approach to examine 100RE commitments across the US, combining a multivariate regression of demographic, institutional, and policy factors in adoption and six interview-based state case studies to discuss implementation. Adoption of this non-binding commitment progressed rapidly for city councils around the US. Results show that many cities passed 100RE commitments with no implementation plan and minimal understanding of implementation challenges. This analysis highlights that many cities will need new institutions and administrative capacities for successful implementation of these ambitious new policies. While many cities abandoned the commitment soon after adoption, collaboration allowed cities in a few states to break through and pursue implementation, examined further in the next two studies. The second paper is a qualitative case study examining policymaking for the Utah Community Renewable Energy Act. Process tracing methods are used to identify causal factors in enacting this legislation at the state level and complementary resolutions at the local level. This Act was passed through the leadership and financial backing of major cities and committed the investor-owned utility to fulfill any city 100RE resolutions passed through 2019. Finally, the third paper is a mixed-methods, descriptive case study of the benefits of Community Choice Aggregation (CCA) in California, which many cities are using to fulfill their 100RE commitments. Cities have adopted CCAs to increase their local voice in the energy process, while fulfilling climate and energy goals. Overall, this research shows that change in the investor-owned utility electricity system is in fact possible from the city scale, though many cities will need institutional innovation to implement these policies and achieve the change they desire. While cities with greater resources are better positioned to make an impact, smaller cities can collaborate to similarly influence the energy system. Communities are interested in lowering energy costs for customers where possible, but the central motivations in these cases were the pursuit of sustainability and increasing local voice in energy decision-making.
ContributorsKunkel, Leah Christine (Author) / Breetz, Hanna L (Thesis advisor) / Parker, Nathan (Committee member) / Salon, Deborah (Committee member) / Arizona State University (Publisher)
Created2022
Description
Interdigitated back contact (IBC) solar cells have achieved the highest single junction silicon wafer-based solar cell power conversion efficiencies reported to date. This thesis is about the fabrication of a high-efficiency silicon heterojunction IBC solar cell for potential use as the bottom cell for a 3-terminal lattice-matched dilute-nitride Ga (In)NP(As)/Si monolithic tandem solar cell. An effective fabrication process has been developed and the process challenges related to open circuit voltage (Voc), series resistance (Rs), and fill factor (FF) are experimentally analyzed. While wet etching, the sample lost the initial passivation, and by changing the etchant solution and passivation process, the voltage at maximum power recovered to an initial value of over 710 mV before metallization. The factors reducing the series resistance loss in IBC cells were also studied. One of these factors was the Indium Tin Oxide (ITO) sputtering parameters, which impact the conductivity of the ITO layer and transport across the a-Si:H/ITO interface. For the standard recipe, the chamber pressure was 3.5 mTorr with no oxygen partial pressure, and the thickness of the ITO layer in contact with the a-Si:H layers, was optimized to 150 nm. The patterning method for the metal contacts and final annealing also change the contact resistance of the base and emitter stack layers. The final annealing step is necessary to recover the sputtering damage; however, the higher the annealing time the higher the final IBC series resistance. The best efficiency achieved was 19.3% (Jsc = 37 mA/cm2, Voc = 691 mV, FF = 71.7%) on 200 µm thick 1-15 Ω-cm n-type CZ C-Si with a designated area of 4 cm2.
ContributorsMoeini Rizi, Mansoure (Author) / Goodnick, Stephen (Thesis advisor) / Honsberg, Christina (Committee member) / Goryll, Michael (Committee member) / Smith, David (Committee member) / Bowden, Stuart (Committee member) / Arizona State University (Publisher)
Created2022