Matching Items (1,043)
Filtering by

Clear all filters

150053-Thumbnail Image.png
Description
While the literature on caregivers of loved ones with Alzheimer's Disease and Related Disorders (ADRD) has continued to grow, the relationship of ethnicity and acculturation factors with regards to the coping strategies used by caregivers has not been extensively explored. The current study included participants from the Palo Alto site

While the literature on caregivers of loved ones with Alzheimer's Disease and Related Disorders (ADRD) has continued to grow, the relationship of ethnicity and acculturation factors with regards to the coping strategies used by caregivers has not been extensively explored. The current study included participants from the Palo Alto site of the Resources for Enhancing Alzheimer's Caregiver Health (REACH) project. The study examined differences in coping strategies between 140 non-Hispanic White, 45 less acculturated Latina, and 61 more acculturated Latina caregivers. Univariate and Multivariate Analysis of Variance, as well as post hoc analyses, were conducted to determine the differences among the three groups. Results indicated less acculturated Latina caregivers employ more avoidant coping strategies compared to non-Hispanic White caregivers. However, no differences were found among the other groups in their use of avoidance coping. Moreover, there were no differences found in the use of social support seeking, count your blessings, problem focused, and blaming others coping among the three groups. These findings have important implications for the design of culturally relevant psychoeducational and therapeutic interventions aimed towards meeting the individual needs of these three populations. In addition, the findings expand on the understanding of maladaptive coping strategies that may be potentially exacerbating caregiver distress among Latina caregivers.
ContributorsFelix, Vitae (Author) / Arciniega, Guillermo M (Thesis advisor) / Robinson-Kurpius, Sharon (Committee member) / Coon, David W. (Committee member) / Arizona State University (Publisher)
Created2011
150058-Thumbnail Image.png
Description
The current study explored whether intrinsically religious individuals are able to separate the "sin" from the "sinner" (i.e., separate category membership from behavior) when judging homosexual individuals, or whether they are instead subject to the negativity bias (judgments based solely on category membership) in moral judgments. All effects were expected

The current study explored whether intrinsically religious individuals are able to separate the "sin" from the "sinner" (i.e., separate category membership from behavior) when judging homosexual individuals, or whether they are instead subject to the negativity bias (judgments based solely on category membership) in moral judgments. All effects were expected to occur only for participants high in homophobia. Participants were 305 undergraduate male and female students at a large, public university in the southwestern U.S. Respondents read one of five scenarios that described gay or straight targets who were celibate or engaged in same or opposite sex relationships, then were asked to respond to a series of questions evaluating attitudes and behavioral intentions toward the target. Results revealed that homophobia led to a negativity bias in judgments of gay targets, which was intensified by intrinsic religiosity. However, individuals high on intrinsic religiosity and high on homophobia also differentiated between gay targets based on sexual behavior, such that gay targets who were celibate or in an opposite-sex relationship were rated more favorably than gay targets in a same-sex relationship. These findings demonstrate that the negativity bias and "sin vs. sinner" differentiation may both be occurring for intrinsically religious individuals. The moderating effect of homophobia on the interaction between intrinsic religiosity and judgments of gay and straight targets shows us that religiosity itself is not inherently tolerant or intolerant.
ContributorsFilip-Crawford, Gabrielle (Author) / Nagoshi, Craig T. (Thesis advisor) / Kwan, Virginia S.Y. (Committee member) / Neuberg, Steven L. (Committee member) / Arizona State University (Publisher)
Created2011
150059-Thumbnail Image.png
Description
Dynamic loading is the term used for one way of optimally loading a transformer. Dynamic loading means the utility takes into account the thermal time constant of the transformer along with the cooling mode transitions, loading profile and ambient temperature when determining the time-varying loading capability of a transformer. Knowing

Dynamic loading is the term used for one way of optimally loading a transformer. Dynamic loading means the utility takes into account the thermal time constant of the transformer along with the cooling mode transitions, loading profile and ambient temperature when determining the time-varying loading capability of a transformer. Knowing the maximum dynamic loading rating can increase utilization of the transformer while not reducing life-expectancy, delaying the replacement of the transformer. This document presents the progress on the transformer dynamic loading project sponsored by Salt River Project (SRP). A software application which performs dynamic loading for substation distribution transformers with appropriate transformer thermal models is developed in this project. Two kinds of thermal hottest-spot temperature (HST) and top-oil temperature (TOT) models that will be used in the application--the ASU HST/TOT models and the ANSI models--are presented. Brief validations of the ASU models are presented, showing that the ASU models are accurate in simulating the thermal processes of the transformers. For this production grade application, both the ANSI and the ASU models are built and tested to select the most appropriate models to be used in the dynamic loading calculations. An existing application to build and select the TOT model was used as a starting point for the enhancements developed in this work. These enhancements include:  Adding the ability to develop HST models to the existing application,  Adding metrics to evaluate the models accuracy and selecting which model will be used in dynamic loading calculation  Adding the capability to perform dynamic loading calculations,  Production of a maximum dynamic load profile that the transformer can tolerate without acceleration of the insulation aging,  Provide suitable output (plots and text) for the results of the dynamic loading calculation. Other challenges discussed include: modification to the input data format, data-quality control, cooling mode estimation. Efforts to overcome these challenges are discussed in this work.
ContributorsLiu, Yi (Author) / Tylavksy, Daniel J (Thesis advisor) / Karady, George G. (Committee member) / Ayyanar, Raja (Committee member) / Arizona State University (Publisher)
Created2011
149705-Thumbnail Image.png
Description
Family adaptation to child developmental disability is a dynamic transactional process that has yet to be tested in a longitudinal, rigorous fashion. In addition, although children with developmental delays frequently have behavior problems, not enough research has examined possible underlying mechanisms in the relation between child developmental delay, adaptation and

Family adaptation to child developmental disability is a dynamic transactional process that has yet to be tested in a longitudinal, rigorous fashion. In addition, although children with developmental delays frequently have behavior problems, not enough research has examined possible underlying mechanisms in the relation between child developmental delay, adaptation and behavior problems. In the current study, factor analysis examined how best to conceptualize the construct of family adaptation to developmental delay. Also, longitudinal growth curve modeling tested models in which child behavior problems mediated the relation between developmental risk and indices of family adaptation. Participants included 130 typically developing children and their families (Mental Development Index [MDI] > 85) and 104 children with developmental delays and their families (MDI < 85). Data were collected yearly between the ages of three and eight as part of a multi-site, longitudinal investigation examining the interrelations among children's developmental status, family processes, and the emergence of child psychopathology. Results of the current study indicated that adaptation is best conceptualized as a multi-index construct. Different aspects of adaptation changed in unique ways over time, with some facets of adaptation remaining stable while others fluctuated. Child internalizing and externalizing behavior problems were found to decrease over time for both children with developmental delays and typically developing children. Child behavior problems were also found to mediate the relation between developmental risk and family adaptation for over half of the mediation pathways. Significant mediation results indicated that children with developmental delays showed higher early levels of behavior problems, which in turn was associated with more maladaptive adaptation. These findings provide further evidence that families of children with developmental delays experience both positive and more challenging changes in their families over time. This study implies important next steps for research and clinical practice in the area of developmental disability.
ContributorsPedersen y Arbona, Anita (Author) / Crnic, Keith A (Thesis advisor) / Sandler, Irwin (Committee member) / Lemery, Kathryn (Committee member) / Enders, Craig (Committee member) / Arizona State University (Publisher)
Created2011
149707-Thumbnail Image.png
Description
Emission of CO2 into the atmosphere has become an increasingly concerning issue as we progress into the 21st century Flue gas from coal-burning power plants accounts for 40% of all carbon dioxide emissions. The key to successful separation and sequestration is to separate CO2 directly from flue gas

Emission of CO2 into the atmosphere has become an increasingly concerning issue as we progress into the 21st century Flue gas from coal-burning power plants accounts for 40% of all carbon dioxide emissions. The key to successful separation and sequestration is to separate CO2 directly from flue gas (10-15% CO2, 70% N2), which can range from a few hundred to as high as 1000°C. Conventional microporous membranes (carbons/silicas/zeolites) are capable of separating CO2 from N2 at low temperatures, but cannot achieve separation above 200°C. To overcome the limitations of microporous membranes, a novel ceramic-carbonate dual-phase membrane for high temperature CO2 separation was proposed. The membrane was synthesized from porous La0.6Sr0.4Co0.8Fe0.2O3-d (LSCF) supports and infiltrated with molten carbonate (Li2CO3/Na2CO3/K2CO3). The CO2 permeation mechanism involves a reaction between CO2 (gas phase) and O= (solid phase) to form CO3=, which is then transported through the molten carbonate (liquid phase) to achieve separation. The effects of membrane thickness, temperature and CO2 partial pressure were studied. Decreasing thickness from 3.0 to 0.375 mm led to higher fluxes at 900°C, ranging from 0.186 to 0.322 mL.min-1.cm-2 respectively. CO2 flux increased with temperature from 700 to 900°C. Activation energy for permeation was similar to that for oxygen ion conduction in LSCF. For partial pressures above 0.05 atm, the membrane exhibited a nearly constant flux. From these observations, it was determined that oxygen ion conductivity limits CO2 permeation and that the equilibrium oxygen vacancy concentration in LSCF is dependent on the partial pressure of CO2 in the gas phase. Finally, the dual-phase membrane was used as a membrane reactor. Separation at high temperatures can produce warm, highly concentrated streams of CO2 that could be used as a chemical feedstock for the synthesis of syngas (H2 + CO). Towards this, three different membrane reactor configurations were examined: 1) blank system, 2) LSCF catalyst and 3) 10% Ni/y-alumina catalyst. Performance increased in the order of blank system < LSCF catalyst < Ni/y-alumina catalyst. Favorable conditions for syngas production were high temperature (850°C), low sweep gas flow rate (10 mL.min-1) and high methane concentration (50%) using the Ni/y-alumina catalyst.
ContributorsAnderson, Matthew Brandon (Author) / Lin, Jerry (Thesis advisor) / Alford, Terry (Committee member) / Rege, Kaushal (Committee member) / Anderson, James (Committee member) / Rivera, Daniel (Committee member) / Arizona State University (Publisher)
Created2011
150023-Thumbnail Image.png
Description
An emerging body of literature suggests that humans likely have multiple threat avoidance systems that enable us to detect and avoid threats in our environment, such as disease threats and physical safety threats. These systems are presumed to be domain-specific, each handling one class of potential threats, and previous research

An emerging body of literature suggests that humans likely have multiple threat avoidance systems that enable us to detect and avoid threats in our environment, such as disease threats and physical safety threats. These systems are presumed to be domain-specific, each handling one class of potential threats, and previous research generally supports this assumption. Previous research has not, however, directly tested the domain-specificity of disease avoidance and self-protection by showing that activating one threat management system does not lead to responses consistent only with a different threat management system. Here, the domain- specificity of the disease avoidance and self-protection systems is directly tested using the lexical decision task, a measure of stereotype accessibility, and the implicit association test. Results, although inconclusive, more strongly support a series of domain-specific threat management systems than a single, domain- general system
ContributorsAnderson, Uriah Steven (Author) / Kenrick, Douglas T. (Thesis advisor) / Shiota, Michelle N. (Committee member) / Neuberg, Steven L. (Committee member) / Becker, David V (Committee member) / Arizona State University (Publisher)
Created2011
149997-Thumbnail Image.png
Description
This thesis pursues a method to deregulate the electric distribution system and provide support to distributed renewable generation. A locational marginal price is used to determine prices across a distribution network in real-time. The real-time pricing may provide benefits such as a reduced electricity bill, decreased peak demand, and lower

This thesis pursues a method to deregulate the electric distribution system and provide support to distributed renewable generation. A locational marginal price is used to determine prices across a distribution network in real-time. The real-time pricing may provide benefits such as a reduced electricity bill, decreased peak demand, and lower emissions. This distribution locational marginal price (D-LMP) determines the cost of electricity at each node in the electrical network. The D-LMP is comprised of the cost of energy, cost of losses, and a renewable energy premium. The renewable premium is an adjustable function to compensate `green' distributed generation. A D-LMP is derived and formulated from the PJM model, as well as several alternative formulations. The logistics and infrastructure an implementation is briefly discussed. This study also takes advantage of the D-LMP real-time pricing to implement distributed storage technology. A storage schedule optimization is developed using linear programming. Day-ahead LMPs and historical load data are used to determine a predictive optimization. A test bed is created to represent a practical electric distribution system. Historical load, solar, and LMP data are used in the test bed to create a realistic environment. A power flow and tabulation of the D-LMPs was conducted for twelve test cases. The test cases included various penetrations of solar photovoltaics (PV), system networking, and the inclusion of storage technology. Tables of the D-LMPs and network voltages are presented in this work. The final costs are summed and the basic economics are examined. The use of a D-LMP can lower costs across a system when advanced technologies are used. Storage improves system costs, decreases losses, improves system load factor, and bolsters voltage. Solar energy provides many of these same attributes at lower penetrations, but high penetrations have a detrimental effect on the system. System networking also increases these positive effects. The D-LMP has a positive impact on residential customer cost, while greatly increasing the costs for the industrial sector. The D-LMP appears to have many positive impacts on the distribution system but proper cost allocation needs further development.
ContributorsKiefer, Brian Daniel (Author) / Heydt, Gerald T (Thesis advisor) / Shunk, Dan (Committee member) / Hedman, Kory (Committee member) / Arizona State University (Publisher)
Created2011
150044-Thumbnail Image.png
Description
The purpose of this study was to investigate the effect of partial exemplar experience on category formation and use. Participants had either complete or limited access to the three dimensions that defined categories by dimensions within different modalities. The concept of "crucial dimension" was introduced and the role it plays

The purpose of this study was to investigate the effect of partial exemplar experience on category formation and use. Participants had either complete or limited access to the three dimensions that defined categories by dimensions within different modalities. The concept of "crucial dimension" was introduced and the role it plays in category definition was explained. It was hypothesized that the effects of partial experience are not explained by a shifting of attention between dimensions (Taylor & Ross, 2009) but rather by an increased reliance on prototypical values used to fill in missing information during incomplete experiences. Results indicated that participants (1) do not fill in missing information with prototypical values, (2) integrate information less efficiently between different modalities than within a single modality, and (3) have difficulty learning only when partial experience prevents access to diagnostic information.
ContributorsCrawford, Thomas (Author) / Homa, Donald (Thesis advisor) / Mcbeath, Micheal (Committee member) / Glenberg, Arthur (Committee member) / Arizona State University (Publisher)
Created2011
150045-Thumbnail Image.png
Description
A relatively simple subset of nanotechnology - nanofluids - can be obtained by adding nanoparticles to conventional base fluids. The promise of these fluids stems from the fact that relatively low particle loadings (typically <1% volume fractions) can significantly change the properties of the base fluid. This research

A relatively simple subset of nanotechnology - nanofluids - can be obtained by adding nanoparticles to conventional base fluids. The promise of these fluids stems from the fact that relatively low particle loadings (typically <1% volume fractions) can significantly change the properties of the base fluid. This research explores how low volume fraction nanofluids, composed of common base-fluids, interact with light energy. Comparative experimentation and modeling reveals that absorbing light volumetrically (i.e. in the depth of the fluid) is fundamentally different from surface-based absorption. Depending on the particle material, size, shape, and volume fraction, a fluid can be changed from being mostly transparent to sunlight (in the case of water, alcohols, oils, and glycols) to being a very efficient volumetric absorber of sunlight. This research also visualizes, under high levels of irradiation, how nanofluids undergo interesting, localized phase change phenomena. For this, images were taken of bubble formation and boiling in aqueous nanofluids heated by a hot wire and by a laser. Infrared thermography was also used to quantify this phenomenon. Overall, though, this research reveals the possibility for novel solar collectors in which the working fluid directly absorbs light energy and undergoes phase change in a single step. Modeling results indicate that these improvements can increase a solar thermal receiver's efficiency by up to 10%.
ContributorsTaylor, Robert (Author) / Phelan, Patrick E (Thesis advisor) / Adrian, Ronald (Committee member) / Trimble, Steve (Committee member) / Posner, Jonathan (Committee member) / Maracas, George (Committee member) / Arizona State University (Publisher)
Created2011
150013-Thumbnail Image.png
Description
Few measurement tools provide reliable, valid data on both children's emotional and behavioral engagement in school. The School Liking and Avoidance Questionnaire (SLAQ) is one such self-report measure developed to evaluate a child's degree of engagement in the school setting as it is manifest in a child's school liking and

Few measurement tools provide reliable, valid data on both children's emotional and behavioral engagement in school. The School Liking and Avoidance Questionnaire (SLAQ) is one such self-report measure developed to evaluate a child's degree of engagement in the school setting as it is manifest in a child's school liking and school avoidance. This study evaluated the SLAQ's dimensionality, reliability, and validity. Data were gathered on children from kindergarten through 6th grade (n=396). Participants reported on their school liking and avoidance in the spring of each school year. Scores consistently represented two distinct, yet related subscales (i.e., school liking and school avoidance) that were reliable and stable over time. Validation analyses provided some corroboration of the construct validity of the SLAQ subscales, but evidence of predictive validity was inconsistent with the hypothesized relations (i.e., early report of school liking and school avoidance did not predict later achievement outcomes). In sum, the findings from this study provide some support for the dimensionality, reliability, and validity of the SLAQ and suggest that it can be used for the assessment of young children's behavioral and emotional engagement in school.
ContributorsSmith, Jillian (Author) / Ladd, Gary W. (Thesis advisor) / Ladd, Becky (Committee member) / Thompson, Marilyn (Committee member) / Arizona State University (Publisher)
Created2011