Matching Items (5)
Filtering by
- All Subjects: Recycling
- All Subjects: Electroplating
- Creators: Tao, Meng
Description
Lithium metal is a promising anode for the next generation lithium batteries owing to its high capacity (3860 mAh g-1) and the lowest negative reduction potential (-3.04 V). Commercial produced lithium anodes have a native rough surface which deteriorates the cycling performance of the battery. Here, an attempt has been made to deposit lithium on copper from an electrolytic cell consisting of simple electrolyte of pyridine and lithium chloride at room temperature. Water is known to react aggressively with the lithium metal, however in the electrochemical plating process, it has a significant beneficial effect in catalyzing the electrochemical reactions. The effect of trace amounts of water was investigated in air as well as in controlled atmosphere of argon, nitrogen, breathing grade dry air and ultra-zero dry air. The electrochemical products examined by Fourier transform infrared spectroscopy revealed the deposition might require the reduction of pyridine to facilitate the reduction of the lithium salt. Purity of the lithium film was determined by inductively coupled plasma mass spectrometry.
ContributorsPode, Gayatri (Author) / Newman, Nathan (Thesis advisor) / Marshall, Daniel (Committee member) / Tao, Meng (Committee member) / Arizona State University (Publisher)
Created2019
Description
Three dimensional printing is a growing field and an excellent medium for rapid prototyping. Its expansion has accelerated over recent years due to the increased affordability of the technology. It is now at the point where the startup cost to get into the field is down to the hobbyist price point. This means that there is an extremely high demand for affordable printing media. Current media such as ABS and PLA is extremely easy to form, but expensive and petroleum intensive to create. A recycling system that could work with a large variety of waste products could change the way that the maker community recycles. This Honors Thesis, or "Creative Project" will be centered on the product launch of small business 3DCycler. Although this launch will require pulling information and skills from various branches of both Business and Science, the scope of this project will be limited to specifically the market entrance of our small business/ product. Within this blanket goal, the project aims to define our target market/ its niche(s), develop proper IP/ lockout strategies, define future manufacturing strategies, and to fully define our beta product. The research was empirical in nature. Through data gathering techniques (e.g., consultations, interviews, survey), exploration was performed. Through these techniques the company 3DCycler took several calculated pivots in order to prepare the company for a strategic product launch and eventual acquisition.
ContributorsFarber-Schaefer, Blaine (Author) / Cho, Steve (Thesis director) / Goodman, Tom (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
In Professor Meng Tao and Wen-His Huang's paper's [1,2] the recycling process to create a sustainable Photovoltaic (PV) industry is laid out. The process utilized to recycle the materials requires the use of three semi-problematic chemicals including: Sodium Hydroxide (NaOH), Nitric Acid (HNO3), and Hydrofluoric Acid (HF). By utilizing a combination of reverse osmosis filtration, pre-lime treatment, neutralization by combination, and mineral specific filtering the chemicals can either by recycled as Environmental Protection Agency (EPA) standardized waste water or profitable byproducts such as Sodium Nitrate (NaNO3). For the recycling of hydrofluoric acid, a combination of pre-lime coagulation, microfiltration and a spiral wound reverse osmosis (RO) system, less than 1mg/L in line with national standards for human consumption. The sodium hydroxide and nitric acid recycling process handles more contaminants that just the byproduct of the chemicals and manages this through a combination of multi-stage flash/vapor distillation along with a reverse osmosis filtration system. By utilizing both systems of recycling, a completely closed loop system for recycling silicon solar cells is laid out and creates a new standard for clean energy management.
ContributorsHaft, Brock Todd (Author) / Tao, Meng (Thesis director) / Augusto, Andre (Committee member) / Barrett, The Honors College (Contributor)
Created2016-12
Description
To date, the most popular and dominant material for commercial solar cells is
crystalline silicon (or wafer-Si). It has the highest cell efficiency and cell lifetime out
of all commercial solar cells. Although the potential of crystalline-Si solar cells in
supplying energy demands is enormous, their future growth will likely be constrained
by two major bottlenecks. The first is the high electricity input to produce
crystalline-Si solar cells and modules, and the second is the limited supply of silver
(Ag) reserves. These bottlenecks prevent crystalline-Si solar cells from reaching
terawatt-scale deployment, which means the electricity produced by crystalline-Si
solar cells would never fulfill a noticeable portion of our energy demands in the future.
In order to solve the issue of Ag limitation for the front metal grid, aluminum (Al)
electroplating has been developed as an alternative metallization technique in the
fabrication of crystalline-Si solar cells. The plating is carried out in a
near-room-temperature ionic liquid by means of galvanostatic electrolysis. It has been
found that dense, adherent Al deposits with resistivity in the high 10^–6 ohm-cm range
can be reproducibly obtained directly on Si substrates and nickel seed layers. An
all-Al Si solar cell, with an electroplated Al front electrode and a screen-printed Al
back electrode, has been successfully demonstrated based on commercial p-type
monocrystalline-Si solar cells, and its efficiency is approaching 15%. Further
optimization of the cell fabrication process, in particular a suitable patterning
technique for the front silicon nitride layer, is expected to increase the efficiency of
the cell to ~18%. This shows the potential of Al electroplating in cell metallization is
promising and replacing Ag with Al as the front finger electrode is feasible.
crystalline silicon (or wafer-Si). It has the highest cell efficiency and cell lifetime out
of all commercial solar cells. Although the potential of crystalline-Si solar cells in
supplying energy demands is enormous, their future growth will likely be constrained
by two major bottlenecks. The first is the high electricity input to produce
crystalline-Si solar cells and modules, and the second is the limited supply of silver
(Ag) reserves. These bottlenecks prevent crystalline-Si solar cells from reaching
terawatt-scale deployment, which means the electricity produced by crystalline-Si
solar cells would never fulfill a noticeable portion of our energy demands in the future.
In order to solve the issue of Ag limitation for the front metal grid, aluminum (Al)
electroplating has been developed as an alternative metallization technique in the
fabrication of crystalline-Si solar cells. The plating is carried out in a
near-room-temperature ionic liquid by means of galvanostatic electrolysis. It has been
found that dense, adherent Al deposits with resistivity in the high 10^–6 ohm-cm range
can be reproducibly obtained directly on Si substrates and nickel seed layers. An
all-Al Si solar cell, with an electroplated Al front electrode and a screen-printed Al
back electrode, has been successfully demonstrated based on commercial p-type
monocrystalline-Si solar cells, and its efficiency is approaching 15%. Further
optimization of the cell fabrication process, in particular a suitable patterning
technique for the front silicon nitride layer, is expected to increase the efficiency of
the cell to ~18%. This shows the potential of Al electroplating in cell metallization is
promising and replacing Ag with Al as the front finger electrode is feasible.
ContributorsSun, Wen-Cheng (Author) / Tao, Meng (Thesis advisor) / Vasileska, Dragica (Committee member) / Yu, Hongbin (Committee member) / Goryll, Michael (Committee member) / Arizona State University (Publisher)
Created2016
Description
As Energy needs grow and photovoltaics expand to meet humanity’s demand for electricity, waste modules will start building up. Tao et. al. propose a recycling process to recover all precious solar cell materials, a process estimated to generate a potential $15 billion in revenue by 2050. A key part of this process is metal recovery, and specifically, silver recovery. Silver recovery via electrowinning was studied using a hydrofluoric acid leachate/electrolyte. Bulk electrolysis trials were performed at varied voltages using a silver working electrode, silver pseudo-reference electrode and a graphite counter-electrode. The highest mass recovery achieved was 98.8% which occurred at 0.65 volts. Product purity was below 90% for all trials and coulombic efficiency never reached above 20%. The average energy consumption per gram of reduced silver was 2.16kWh/kg. Bulk electrolysis indicates that parasitic reactions are drawing power from the potentiostat and limiting the mass recovery of the system. In order to develop this process to the practical use stage, parasitic reactions must be eliminated, and product purity and power efficiency must improve. The system should be run in a vacuum environment and the reduction peaks in the cell should be characterized using cyclic voltammetry.
ContributorsTezak, Cooper R (Author) / Tao, Meng (Thesis director) / Phelan, Patrick (Committee member) / Chemical Engineering Program (Contributor) / School of International Letters and Cultures (Contributor) / Barrett, The Honors College (Contributor)
Created2020-12