Matching Items (868)
Filtering by
- All Subjects: Mechanical Engineering
- All Subjects: Nutrition
- Member of: Theses and Dissertations
- Member of: Barrett, The Honors College Thesis/Creative Project Collection
- Status: Published
Description
Cavitation erosion is a significant cause of wear in marine components, such as impellers, propellers or rudders. While the erosion process has been widely studied on metals, the effect of cavitation on polymers is not well-understood. The stress response in metals differs greatly from that of polymers, e.g. rate and temperature effects are far more important, thus damage and wear mechanisms of polymers under cavitating flows are significantly different. In this work, heat-driven failure caused by viscous dissipation and void nucleation resulting from tensile stresses arising from stress wave reflections are investigated as two possible material failure mechanisms.
As a first step in developing a fundamental understanding of the cavitation erosion process on polymer surfaces, simulations are performed of the collapse of individual bubbles against a compliant surface e.g. metallic substrates with polyurea coatings. The surface response of collapse-driven impact loads is represented by a idealized, time-dependent, Gaussian pressure distribution on the surface. A two-dimensional distribution of load radii and durations is considered corresponding to characteristic of cavitating flows accelerated erosion experiments. Finite element simulations are performed to fit a response curve that relates the loading parameters to the energy dissipated in the coating and integrated with collapse statistics to generate an expected heat input into the coating.
The impulsive pressure, which is generated due to bubble collapse, impacts the material and generates intense shock waves. The stress waves within the material reflects by interaction with the substrate. A transient region of high tensile stress is produced by the interaction of these waves. Simulations suggests that maximum hydrostatic tension which cause failure of polyurea layer is observed in thick coating. Also, the dissipated viscous energy and corresponding temperature rise in a polyurea is calculated, and it is concluded that temperature has influence on deformation.
As a first step in developing a fundamental understanding of the cavitation erosion process on polymer surfaces, simulations are performed of the collapse of individual bubbles against a compliant surface e.g. metallic substrates with polyurea coatings. The surface response of collapse-driven impact loads is represented by a idealized, time-dependent, Gaussian pressure distribution on the surface. A two-dimensional distribution of load radii and durations is considered corresponding to characteristic of cavitating flows accelerated erosion experiments. Finite element simulations are performed to fit a response curve that relates the loading parameters to the energy dissipated in the coating and integrated with collapse statistics to generate an expected heat input into the coating.
The impulsive pressure, which is generated due to bubble collapse, impacts the material and generates intense shock waves. The stress waves within the material reflects by interaction with the substrate. A transient region of high tensile stress is produced by the interaction of these waves. Simulations suggests that maximum hydrostatic tension which cause failure of polyurea layer is observed in thick coating. Also, the dissipated viscous energy and corresponding temperature rise in a polyurea is calculated, and it is concluded that temperature has influence on deformation.
ContributorsPanwar, Ajay (Author) / Oswald, Jay (Thesis advisor) / Dooley, Kevin (Committee member) / Chen, Kangping (Committee member) / Arizona State University (Publisher)
Created2015
Description
Skin electronics is one of the most promising applications of stretchable electronics. The versatility of skin electronics can only be guaranteed when it has conformal contact with human skin. While both analytical and numerical solutions for contact between serpentine interconnects and soft substrate remain unreported, the motivation of this thesis is to render a novel method to numerically study the conformability of the serpentine interconnects. This thesis explained thoroughly how to conduct finite element analysis for the conformability of skin electronics, including modeling, meshing method and step setup etc.. User-defined elements were implemented to the finite element commercial package ABAQUS for the analysis of conformability. With thorough investigation into the conformability of Fermat’s spiral, it has been found that the kirigami based pattern exhibits high conformability. Since thickness is a key factor to design skin electronics, the thesis also talked about how the change of thickness of the skin electronics impacts on the conformability.
ContributorsFan, Yiling (Author) / Jiang, Hanqing (Thesis advisor) / Hildreth, Owen (Committee member) / Yu, Hongbin (Committee member) / Arizona State University (Publisher)
Created2015
Description
Recent studies of the occurrence of post-flutter limit cycle oscillations (LCO) of the F-16 have provided good support to the long-standing hypothesis that this phenomenon involves a nonlinear structural damping. A potential mechanism for the appearance of nonlinearity in the damping are the nonlinear geometric effects that arise when the deformations become large enough to exceed the linear regime. In this light, the focus of this investigation is first on extending nonlinear reduced order modeling (ROM) methods to include viscoelasticity which is introduced here through a linear Kelvin-Voigt model in the undeformed configuration. Proceeding with a Galerkin approach, the ROM governing equations of motion are obtained and are found to be of a generalized van der Pol-Duffing form with parameters depending on the structure and the chosen basis functions. An identification approach of the nonlinear damping parameters is next proposed which is applicable to structures modeled within commercial finite element software.
The effects of this nonlinear damping mechanism on the post-flutter response is next analyzed on the Goland wing through time-marching of the aeroelastic equations comprising a rational fraction approximation of the linear aerodynamic forces. It is indeed found that the nonlinearity in the damping can stabilize the unstable aerodynamics and lead to finite amplitude limit cycle oscillations even when the stiffness related nonlinear geometric effects are neglected. The incorporation of these latter effects in the model is found to further decrease the amplitude of LCO even though the dominant bending motions do not seem to stiffen as the level of displacements is increased in static analyses.
The effects of this nonlinear damping mechanism on the post-flutter response is next analyzed on the Goland wing through time-marching of the aeroelastic equations comprising a rational fraction approximation of the linear aerodynamic forces. It is indeed found that the nonlinearity in the damping can stabilize the unstable aerodynamics and lead to finite amplitude limit cycle oscillations even when the stiffness related nonlinear geometric effects are neglected. The incorporation of these latter effects in the model is found to further decrease the amplitude of LCO even though the dominant bending motions do not seem to stiffen as the level of displacements is increased in static analyses.
ContributorsSong, Pengchao (Author) / Mignolet, Marc P (Thesis advisor) / Chattopadhyay, Aditi (Committee member) / Oswald, Jay (Committee member) / Arizona State University (Publisher)
Created2015
Description
Gluten is another name for natural proteins found in wheat, rye, barley and other grains that are commonly found in most boxed, pre-made, or baked items. However, the number of people diagnosed with Celiac's Disease, Non-Celiac Gluten Sensitivity, or Wheat Allergy has risen dramatically over the past few decades. In fact, the Gluten-Free Market is estimated to be worth 6.6 billion dollars by 2017. Therefore, this cookbook was made to provide quick, easy, and diverse recipes for people unable to ingest gluten without hurting their wallets.
ContributorsDas, Surina Maria (Author) / Morse, Lisa (Thesis director) / Grgich, Traci (Committee member) / Department of Psychology (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The aim of this paper is to investigate the B-casein fractions in Scandinavian and Icelandic milk for evidence to either support or refute the claim that the A1 variant of B-casein is diabetogenic in adolescent populations. Based on the theory that differences in milk protein composition explain a lower incidence of Type 1 Diabetes (T1D) in Iceland when compared to surrounding Nordic countries, an informative poster was created so that a more educated decision can be made by those wishing to take preventative measures against the incidence of the disease. This paper includes a basic background behind the epidemiology of T1D and the Nordic Nutrition Recommendations. Next, comparison between milk protein composition and consumption in Iceland against the other Nordic countries is performed through an in-depth literature review. The review was conducted using PubMed databases until December of 2018. Key findings of this investigation raise concerns regarding the decision between optimizing milk producing rates or breeding for milk devoid of diabetogenic proteins. The current literature on the impact of cattle genetics on the protein composition of milk sheds light on the safety of Icelandic dairy and the resulting health of their population. Icelandic dairy has been evidenced to contain lower levels of A1 b-casein and is considered less diabetogenic. For these reasons, this author would recommend the consumption of Icelandic dairy products over those from other regions.
ContributorsThunberg, Carly Marie (Author) / Morse, Lisa (Thesis director) / Grgich, Traci (Committee member) / College of Health Solutions (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Failures in the cold chain, the system of refrigerated storage and transport that provides fresh produce or other essentials to be maintained at desired temperatures and environmental conditions, lead to food and energy waste. The mini container (MC) concept is introduced as an alternative to conventional refrigerated trucks (“reefers”), particularly for small growers. The energy consumption and corresponding GHG emissions for transporting tomatoes in two cities representing contrasting climates is analyzed for conventional reefers and the proposed mini containers. The results show that, for partial reefer loads, using the MCs reduces energy consumption and GHG emissions. The transient behavior of the vapor compression refrigeration cycle is analyzed by considering each component as a “lumped” system, and the resulting sub-models are solved using the Runge Kutta 4th-order method in a MATLAB code at hot and cold ambient temperatures. The time needed to reach steady state temperatures and the temperature values are determined. The maximum required compressor work in the transient phase and at steady state are computed, and as expected, as the ambient temperature increases, both values increase. Finally, the average coefficient of performance (COP) is determined for varying heat transfer coefficient values for the condenser and for the evaporator. The results show that the average COP increases as heat transfer coefficient values for the condenser and the evaporator increase. Starting the system from rest has an adverse effect on the COP due to the higher compressor load needed to change the temperature of the condenser and the evaporator. Finally, the impact on COP is analyzed by redirecting a fraction of the cold exhaust air to provide supplemental cooling of the condenser. It is noted that cooling the condenser improves the system's performance better than cooling the fresh air at 0% of returned air to the system.To sum up, the dissertation shows that the comparison between the conventional reefer and the MC illustrates the promising advantages of the MC, then a transient analysis is developed for deeply understanding the behaviors of the system component parameters, which leads finally to improvements in the system to enhance its performance.
ContributorsSyam, Mahmmoud Muhammed (Author) / Phelan, Patrick (Thesis advisor) / Villalobos, Rene (Thesis advisor) / Huang, Huei-Ping (Committee member) / Bocanegra, Luis (Committee member) / Al Omari, Salah (Committee member) / Arizona State University (Publisher)
Created2023
Description
MyCollegeCooking.com is a student-driven initiative aimed at revolutionizing the way college students approach nutrition and cooking. Understanding the unique challenges faced by students, such as limited space and time constraints, our platform provides accessible tools and inspiration for preparing nutritious meals. Beyond offering recipes, our website includes detailed nutritional information and encourages interaction from users, fostering a dynamic community. Supported by research and feedback from over 100 college students, our focus on simplicity, accessibility, and balance addresses the common concerns of time and money. Through strategic marketing efforts, particularly leveraging social media, we aim to raise awareness and promote healthy cooking habits among college students nationwide. MyCollegeCooking.com isn't just a recipe website; it's a collaborative platform dedicated to enhancing the well-being and success of students through nutritious eating and community engagement.
ContributorsVandeest, Maren (Author) / Rennie, Isabel (Co-author) / Spreitzer, Nicole (Co-author) / Modic, Jill (Co-author) / Byrne, Jared (Thesis director) / McElfish, Alex (Committee member) / Mogytyuh, Sarah (Committee member) / Hill, Rose (Committee member) / Barrett, The Honors College (Contributor) / School of Sustainable Engineering & Built Envirnmt (Contributor) / Industrial, Systems & Operations Engineering Prgm (Contributor)
Created2024-05
Description
This honors thesis project entailed the design, construction, and validation of a
mechanism capable of creating a consistent and controllable impact between a stone-tipped
dropper and a stone core or other arbitrary workpiece, to assist the experimental archeologist
in conducting flintknapping research which retains the essential features of hand knapping
while largely removing the large element of variation between human knappers. After the
initial design of a linear gravity-powered mechanism—or dropper device—a simplified
prototype was assembled as a proof of concept. After a modified version of the full-sized design
was assembled using insights from the prototype, impact force testing was conducted to verify
the device’s theoretical principles of operation. The validation experiment verified that the
device may be accurately controlled by varying the drop height with the square of the desired
impact force relative to an arbitrary reference drop, though it was unable to predict the
absolute magnitude of impact forces experienced by real hammerstones and cores during
knapping. The project was successful in creating a tool that may be useful for researchers to
conduct better-controlled archeology experiments, though the design may be improved with
added functionality that would allow users to more effectively control the orientation of the
striker and core.
ContributorsMukherjee, Ribhu (Author) / Grewal, Anoop (Thesis director) / Murray, John (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2024-05