Matching Items (4)
Filtering by
- All Subjects: Plastics
- Genre: Academic theses
- Genre: Masters Thesis
- Creators: Green, Matthew
- Member of: Theses and Dissertations
Description
With the growing popularity of 3d printing in recreational, research, and commercial enterprises new techniques and processes are being developed to improve the quality of parts created. Even so, the anisotropic properties is still a major hindrance of parts manufactured in this method. The goal is to produce parts that mimic the strength characteristics of a comparable part of the same design and materials created using injection molding. In achieving this goal the production cost can be reduced by eliminating the initial investment needed for the creation of expensive tooling. This initial investment reduction will allow for a wider variant of products in smaller batch runs to be made available. This thesis implements the use of ultraviolet (UV) illumination for an in-process laser local pre-deposition heating (LLPH). By comparing samples with and without the LLPH process it is determined that applied energy that is absorbed by the polymer is converted to an increase in the interlayer temperature, and resulting in an observed increase in tensile strength over the baseline test samples. The increase in interlayer bonding thus can be considered the dominating factor over polymer degradation.
ContributorsKusel, Scott Daniel (Author) / Hsu, Keng (Thesis advisor) / Sodemann, Angela (Committee member) / Kannan, Arunachala M (Committee member) / Arizona State University (Publisher)
Created2017
Description
Plastic is a valuable part of the consumer economy, but it creates negative environmental externalities throughout its lifecycle. To reduce these effects, a sustainable circular economy is needed, where more plastic is diverted from landfill or environmental sinks through reduction, reuse, recycling, or composting, while addressing social needs. Although many different stakeholders (industry, academia, policymakers) are calling for a sustainable circular economy for plastics, globally, less than 20% of plastic is recycled with no data on reduction and reuse. In this dissertation, a mixed methods approach is used to suggest how organizations related to the plastic industry can implement a sustainable circular economy. The first chapter identifies how firms across the plastic value chain can innovate to adopt a sustainable circular flow. A systematic review reveals over 300 examples, which are used to create a material flow typology. Findings summarize five critical points of innovation and indicate that innovation adoption is low. More concerted efforts are needed to improve innovation adoption and there is a need to shift innovation focus from resource efficiency to sustainability. The second chapters studies U.S. plastic recyclers’ price signals to generate evidence for favorable recycling policies. A hedonic analysis reveals recyclers preferences for recyclability – plastic properties that enable recycling. Results suggest that adequate recycling infrastructure and absence of virgin plastic can play an important role in facilitating more recycling. In the third paper, the role of governments as consumers is studied. As the largest consumers in a market, governments can signal a large demand for circular products and services, however public administration literature has paid limited attention to it. A theoretical framework is created to fill the knowledge gap and suggest how governments can use sustainable public procurement for a circular economy. A systematic literature review of the top ten public administration journals over 32 years reveals critical knowledge gaps and the potential for important sustainable public procurement research
ContributorsHafsa, Fatima (Author) / Englin, Jeffrey (Thesis advisor) / Abbott, Joshua K (Committee member) / Darnall, Nicole (Committee member) / Dooley, Kevin J (Committee member) / Arizona State University (Publisher)
Created2022
Description
Various research papers and literature were reviewed and consulted for the depolymerization of polyethylene terephthalate (PET) using long chain alkyl amines and ethylene glycol (EG) as catalyst in the aminolysis process. The main hypothesis of this thesis is to use EG as a catalyst in the aminolysis of PET using octylamine, dodecylamine and hexadecylamine. Initial reactions with the three amines were performed with and without EG to observe and compare the terephthalamides obtained from these reactions to test this hypothesis. Various reaction conditions like concentration of reactants, temperature and time of reaction were later considered and employed to find the optimal conditions for the depolymerization of PET before confirming the catalytic properties of EG in the aminolysis reaction. The depolymerized products were subjected to attenuated total reflectance-infrared spectroscopy (ATR-IR Spectroscopy) to check for presence of important amide and ester peaks through their infrared absorption peaks, thermogravimetric analysis (TGA) to find their Td5 temperatures and differential scanning calorimetry (DSC) to check for endothermic melting temperature of the obtained products. These characterization techniques were used to understand, examine, and compare the different properties of the products obtained from different reaction mixtures. The three distinct amines considered for this reaction also showed differences in the conversion rate of PET under similar reaction conditions thus signifying the importance of selecting an appropriate amine reactant for the aminolysis process. Finally, the in-situ IR probe was used to determine the reaction kinetics of the aminolysis reaction and the formation and loss of products and reactants with time.
ContributorsBakkireddy, Adarsh (Author) / Green, Matthew (Thesis advisor) / Emady, Heather (Committee member) / Seo, Eileen S. (Committee member) / Arizona State University (Publisher)
Created2023
Description
High-Density polyethylene (HDPE) is the most used polymer on earth. Since it is used in such large quantities, it has become the most extensively produced polymer on the planet. Unfortunately, the rate of reusing or recycling HDPE is far behind the rate of production leading to plastic pollution. Most of this waste plastic ends up in landfills or incineration to recover energy. Plastic production consumes a lot of energy and is associated with CO2 emissions. This method of disposing plastic only adds to the environmental pollution rather than improving it. Primary reasons for low recycling rate appear to be more political and financial. In the US, the rate of recycling was less than 10% whereas Japan showed a recycling rate of more than 80%. The other aspect of low recycling is financial. In order to make recycling a financially viable process, efforts have to be made to streamline the process of waste collection, segregation and technically feasible process. This study focusses on the technical aspect of the issue. Even though efforts have been made to recycle HDPE, none of the processes have been recycle HDPE with financial viability, recovering full value of plastic, minimum CO2 emissions and minimum change in properties of the polymer. This study focusses on effective recycling of HDPE with minimum change in its properties. Dissolution has been used to dissolve the polymer selectively and then reprecipitating the polymer using a non-solvent to obtain the polymer grains. This is followed by mixing additives to the polymer grains to minimize degradation of the polymer during the extrusion process. The polymer is then extruded in an extruder beyond its melting temperature. This process is repeated for 5 cycles. After each cycle, the polymer is tested for its properties using the Tensile Testing, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Dynamic Mechanicalii
Analysis (DMA). It was observed that the rheological properties of the polymer were maintained after the 5th recycle whereas the mechanical properties deteriorated after the 2nd recycle. Also, increase in carbonyl index was observed after 5th recycle.
ContributorsSaini, Rahul Rakesh (Author) / Green, Matthew (Thesis advisor) / Holloway, Julianne (Committee member) / Xie, Renxuan (Committee member) / Arizona State University (Publisher)
Created2022