Matching Items (3)
Filtering by
- All Subjects: Plastics
- Genre: Academic theses
- Genre: Masters Thesis
- Creators: Akula, kapil Chandra
- Creators: Allenby, Braden R.
- Member of: Theses and Dissertations
Description
Fossil resources have enabled the development of the plastic industry in the last century. More recently biopolymers have been making gains in the global plastics market. Biopolymers are plastics derived from plants, primarily corn, which can function very similarly to fossil based plastics. One difference between some of the dominant biopolymers, namely polylactic acid and thermoplastic starch, and the most common fossil-based plastics is the feature of compostability. This means that biopolymers represent not only a shift from petroleum and natural gas to agricultural resources but also that these plastics have potentially different impacts resulting from alternative disposal routes. The current end of life material flows are not well understood since waste streams vary widely based on regional availability of end of life treatments and the role that decision making has on waste identification and disposal.
This dissertation is focused on highlighting the importance of end of life on the life-cycle of biopolymers, identifying how compostable biopolymer products are entering waste streams, improving collection and waste processing, and quantifying the impacts that result from the disposal of biopolymers. Biopolymers, while somewhat available to residential consumers, are primarily being used by various food service organizations trying to achieve a variety of goals such as zero waste, green advertising, and providing more consumer options. While compostable biopolymers may be able to help reduce wastes to landfill they do result in environmental tradeoffs associated with agriculture during the production phase. Biopolymers may improve the management for compostable waste streams by enabling streamlined services and reducing non-compostable fossil-based plastic contamination. The concerns about incomplete degradation of biopolymers in composting facilities may be ameliorated using alkaline amendments sourced from waste streams of other industries. While recycling still yields major benefits for traditional resins, bio-based equivalents may provide addition benefits and compostable biopolymers offer benefits with regards to global warming and fossil fuel depletion. The research presented here represents two published studies, two studies which have been accepted for publication, and a life-cycle assessment that will be submitted for publication.
This dissertation is focused on highlighting the importance of end of life on the life-cycle of biopolymers, identifying how compostable biopolymer products are entering waste streams, improving collection and waste processing, and quantifying the impacts that result from the disposal of biopolymers. Biopolymers, while somewhat available to residential consumers, are primarily being used by various food service organizations trying to achieve a variety of goals such as zero waste, green advertising, and providing more consumer options. While compostable biopolymers may be able to help reduce wastes to landfill they do result in environmental tradeoffs associated with agriculture during the production phase. Biopolymers may improve the management for compostable waste streams by enabling streamlined services and reducing non-compostable fossil-based plastic contamination. The concerns about incomplete degradation of biopolymers in composting facilities may be ameliorated using alkaline amendments sourced from waste streams of other industries. While recycling still yields major benefits for traditional resins, bio-based equivalents may provide addition benefits and compostable biopolymers offer benefits with regards to global warming and fossil fuel depletion. The research presented here represents two published studies, two studies which have been accepted for publication, and a life-cycle assessment that will be submitted for publication.
ContributorsHottle, Troy A (Author) / Landis, Amy E. (Thesis advisor) / Allenby, Braden R. (Thesis advisor) / Bilec, Melissa M (Committee member) / Arizona State University (Publisher)
Created2015
Description
With the growing popularity of 3d printing in recreational, research, and commercial enterprises new techniques and processes are being developed to improve the quality of parts created. Even so, the anisotropic properties is still a major hindrance of parts manufactured in this method. The goal is to produce parts that mimic the strength characteristics of a comparable part of the same design and materials created using injection molding. In achieving this goal the production cost can be reduced by eliminating the initial investment needed for the creation of expensive tooling. This initial investment reduction will allow for a wider variant of products in smaller batch runs to be made available. This thesis implements the use of ultraviolet (UV) illumination for an in-process laser local pre-deposition heating (LLPH). By comparing samples with and without the LLPH process it is determined that applied energy that is absorbed by the polymer is converted to an increase in the interlayer temperature, and resulting in an observed increase in tensile strength over the baseline test samples. The increase in interlayer bonding thus can be considered the dominating factor over polymer degradation.
ContributorsKusel, Scott Daniel (Author) / Hsu, Keng (Thesis advisor) / Sodemann, Angela (Committee member) / Kannan, Arunachala M (Committee member) / Arizona State University (Publisher)
Created2017
Description
Polypropylene, a non-biodegradable plastic with a higher c-c bond disassociation energy than other conventional polymers like Polyethylene (PE), is used to manufacture these three-layered masks. The amount of plastic pollution in the environment has grown tremendously, nearing million tons in a short period of time. As a result, the purpose of this study is to reduce the environmental damage caused by facemasks. This M.S. thesis offers a concise overview of various thermochemical methods employed to depolymerize plastic waste materials. It emphasizes environmentally conscious and sustainable practices, specifically focusing on solvothermal processing. This innovative approach aims to convert discarded face masks into valuable resources, including hydrocarbons suitable for jet fuel and other useful products.
The thesis provides an in-depth exploration of experimental investigations into solvothermal liquefaction techniques. Operating under specific conditions, namely, a temperature of 350°C and a reaction duration of 90 minutes, the results were notably impressive. These results included an exceptional conversion rate of 99.8%, an oil yield of 39.3%, and higher heating values (HHV) of 46.81 MJ/kg for the generated oil samples. It's worth noting that the HHV of the oil samples obtained through the solvothermal liquefaction (STL) method, at 46.82 MJ/kg, surpasses the HHV of gasoline, which stands at 43.4 MJ/kg.
The significant role of the solvent in the depolymerization process involves the dissolution and dispersion of the feedstock through solvation. This reduces the required thermal cracking temperature by enhancing mass and thermal energy transfer. While solvolysis reactions between the solvent and feedstock are limited in thermal liquefaction, the primary depolymerization process follows thermal cracking. This involves the random scission of polypropylene (PP) molecules during heat treatment, with minimal polymerization, cyclization, and radical recombination reactions occurring through free radical mechanisms.
Overall, this work demonstrates the feasibility of a highly promising technique for the effective chemical upcycling of polypropylene-based plastics into valuable resources, particularly in the context of jet fuel hydrocarbons, showcasing the comprehensive analytical methods employed to characterize the products of this innovative process.
ContributorsAkula, kapil Chandra (Author) / Deng, Shuguang (Thesis advisor) / Fini, Elham (Committee member) / Salifu, Emmanuel (Committee member) / Arizona State University (Publisher)
Created2023