Matching Items (209)
Filtering by
- All Subjects: Environmental engineering
- Genre: Masters Thesis
- Creators: Arizona State University
- Status: Published
Description
Intimate coupling of Ti2 photocatalysis and biodegradation (ICPB) offers potential for degrading biorecalcitrant and toxic organic compounds much better than possible with conventional wastewater treatments. This study reports on using a novel sponge-type, Ti2-coated biofilm carrier that shows significant adherence of Ti2 to its exterior and the ability to accumulate biomass in its interior (protected from UV light and free radicals). First, this carrier was tested for ICPB in a continuous-flow photocatalytic circulating-bed biofilm reactor (PCBBR) to mineralize biorecalcitrant organic: 2,4,5-trichlorophenol (TCP). Four mechanisms possibly acting of ICPB were tested separately: TCP adsorption, UV photolysis/photocatalysis, and biodegradation. The carrier exhibited strong TCP adsorption, while photolysis was negligible. Photocatalysis produced TCP-degradation products that could be mineralized and the strong adsorption of TCP to the carrier enhanced biodegradation by relieving toxicity. Validating the ICPB concept, biofilm was protected inside the carriers from UV light and free radicals. ICPB significantly lowered the diversity of the bacterial community, but five genera known to biodegrade chlorinated phenols were markedly enriched. Secondly, decolorization and mineralization of reactive dyes by ICPB were investigated on a refined Ti2-coated biofilm carrier in a PCBBR. Two typical reactive dyes: Reactive Black 5 (RB5) and Reactive Yellow 86 (RY86), showed similar first-order kinetics when being photocatalytically decolorized at low pH (~4-5), which was inhibited at neutral pH in the presence of phosphate or carbonate buffer, presumably due to electrostatic repulsion from negatively charged surface sites on Ti2, radical scavenging by phosphate or carbonate, or both. In the PCBBR, photocatalysis alone with Ti2-coated carriers could remove RB5 and COD by 97% and 47%, respectively. Addition of biofilm inside macroporous carriers maintained a similar RB5 removal efficiency, but COD removal increased to 65%, which is evidence of ICPB despite the low pH. A proposed ICPB pathway for RB5 suggests that a major intermediate, a naphthol derivative, was responsible for most of the residual COD. Finally, three low-temperature sintering methods, called O, D and DN, were compared based on photocatalytic efficiency and Ti2 adherence. The DN method had the best Ti2-coating properties and was a successful carrier for ICPB of RB5 in a PCBBR.
ContributorsLi, Guozheng (Author) / Rittmann, Bruce E. (Thesis advisor) / Halden, Rolf (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Arizona State University (Publisher)
Created2011
Description
Wage theft is a national epidemic that only recently became the focus of increasing research, critical public questioning, and activism. Given the socio- political climate in Maricopa County, Arizona and the heightened national attention on the state, this study answers important questions about the work experiences of immigrant workers in the region. Through an analysis of interviews with 14 low-wage Mexican workers from a local worker rights center, I explore workers' access to traditional recourse, the effects of wage theft on workers and families, and the survival strategies they utilize to mitigate the effects of sudden income loss. By providing an historical overview of immigration and employment law, I show how a dehumanized and racialized labor force has been structurally maintained and exploited. Furthermore, I describe the implications of two simultaneous cultures on the state of labor: the culture of fear among immigrants to assert their rights and utilize recourse, and the culture of criminality and impunity among employers who face virtually no sanctions when they are non-compliant with labor law. The results indicate that unless the rights of immigrant workers are equally enforced and recourse is made equally accessible, not only will the standards for pay and working conditions continue to collapse, but the health of Latino communities will also deteriorate. I assert that in addition to structural change, a shift in national public discourse and ideology is critical to substantive socio-political transformation.
ContributorsSanidad, Cristina (Author) / Téllez, Michelle (Thesis advisor) / Adelman, Madelaine (Committee member) / Gomez, Alan E (Committee member) / Arizona State University (Publisher)
Created2011
Description
This research is about urban homeless people's vulnerability to extreme temperatures and the related socio-spatial dynamics. Specifically, this research investigates heat related coping strategies homeless people use and how the urban environment setting impacts those coping strategies. Semi-structured interviews were conducted with homeless people in Phoenix, Arizona during the summer of 2010. The findings demonstrate that homeless people have a variety of coping strategies and the urban environment setting unjustly impacts those strategies. The results suggest a need for further studies that focus spatial environmental effects on homeless people and other vulnerable populations.
ContributorsSanchez, Cory (Author) / Johnson, John M. (Thesis advisor) / Harlan, Sharon L (Committee member) / Lauderdale, Pat (Committee member) / Arizona State University (Publisher)
Created2011
Description
This paper is seeking to use exploratory factor analysis to construct a numeric representation of Hill Collin's matrix of domination. According to Hill Collins, the Current American matrix of domination, or the interlocking systems of oppression, includes race, gender, class, sexual orientation, religion, immigration status, disability, and age. The study uses exploratory factor analysis to construct a matrix of domination scale. The study launched an on-line survey (n=448) that was circulated through the social network Facebook to collect data. Factor analysis revealed that the constructed matrix of domination represents an accurate description of the current social hierarchy in the United States. Also, the constructed matrix of domination was an accurate predictor of the probability of experiencing domestic abuse according to the current available statistics.
ContributorsAzab, Marian (Author) / Quan, H. L. T. (Thesis advisor) / Keil, Thomas (Committee member) / Stancliff, Michael (Committee member) / Arizona State University (Publisher)
Created2011
A bilingual, bicultural interpreter and researcher navigates blurry boundaries and intersectionality
Description
A researcher reflects using a close reading of interview transcripts and description to share what happened while participating in multiple roles in a larger ethnographic study of the acculturation process of deaf students in kindergarten classrooms in three countries. The course of this paper will focus on three instances that took place in Japan and America. The analysis of these examples will bring to light the concept of taking on multiple roles, including graduate research assistant, interpreter, cultural mediator, and sociolinguistic consultant within a research project serving to uncover challenging personal and professional dilemmas and crossing boundaries; the dual roles, interpreter and researcher being the primary focus. This analysis results in a brief look at a thought provoking, yet evolving task of the researcher/interpreter. Maintaining multiple roles in the study the researcher is able to potentially identify and contribute "hidden" knowledge that may have been overlooked by other members of the research team. Balancing these different roles become key implications when interpreting practice, ethical boundaries, and participant research at times the lines of separation are blurred.
ContributorsHensley, Jennifer Scarboro (Author) / Tobin, Joseph (Thesis advisor) / Artiles, Alfredo (Committee member) / Horejes, Thomas (Committee member) / Arizona State University (Publisher)
Created2011
Description
The goal of the study was twofold: (i) to investigate the synthesis of hematite-impregnated granular activated carbon (Fe-GAC) by hydrolysis of Fe (III) and (ii) to assess the effectiveness of the fabricated media in removal of arsenic from water. Fe-GAC was synthesized by hydrolysis of Fe(III) salts under two Fe (III) initial dosages (0.5M and 2M) and two hydrolysis periods (24 hrs and 72 hrs). The iron content of the fabricated Fe-GAC media ranged from 0.9% to 4.4% Fe/g of the dry media. Pseudo-equilibrium batch test data at pH = 7.7±0.2 in 1mM NaHCO3 buffered ultrapure water and challenge groundwater representative of the Arizona Mexico border region were fitted to a Freundlich isotherm model. The findings suggested that the arsenic adsorption capacity of the metal (hydr)oxide modified GAC media is primarily controlled by the surface area of the media, while the metal content exhibited lesser effect. The adsorption capacity of the media in the model Mexican groundwater matrix was significantly lower for all adsorbent media. Continuous flow short bed adsorber tests (SBA) demonstrated that the adsorption capacity for arsenic in the challenge groundwater was reduced by a factor of 3 to 4 as a result of the mass transport effects. When compared on metal basis, the iron (hydr)oxide modified media performed comparably well as existing commercial media for treatment of arsenic. On dry mass basis, the fabricated media in this study removed less arsenic than their commercial counterparts because the metal content of the commercial media was significantly higher.
ContributorsJain, Arti (Author) / Hristovski, Kiril (Thesis advisor) / Olson, Larry (Committee member) / Madar, David (Committee member) / Edwards, David (Committee member) / Arizona State University (Publisher)
Created2011
Description
One in six children in the developing world is engaged in Child labor. Child labor is considered an issue that violates children's rights in many countries and Iraq is no exception. In 2004, Iraq had 1,300,000 children between the ages of eight and sixteen years engaged in work (UNICEF.com, 2004). This study identifies the major causes of child labor in Iraq and investigates the consequences of this issue. In this thesis I draw on the comparison of former regimes in Iraq and Egypt and how those regimes were mistreating their citizens by making them live under poverty and oppression while they were receiving support from the U.S. Poverty is the major cause behind Iraqi children engaging in work. I used the data I collected in Iraq, in the city of Nasiriyah, of 28 working children to explain the relationship between poverty, students drop out of school, family attitude towards education and the child engagement in work. At the end of the thesis I offer a list of recommendations to try to address the problem of child labor in Iraq. The recommendations and regulations are for Iraqi government and the NGOs to take into consideration in trying to resolve and regulate the issue of child labor to rescue the children in Iraq from more exploitation in the future.
ContributorsAl-Taee, Hawraa F (Author) / Elenes, C (Thesis advisor) / Erfani, Julie M (Committee member) / Ali, Souad (Committee member) / Arizona State University (Publisher)
Created2011
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
As the demand for power increases in populated areas, so will the demand for water. Current power plant technology relies heavily on the Rankine cycle in coal, nuclear and solar thermal power systems which ultimately use condensers to cool the steam in the system. In dry climates, the amount of water to cool off the condenser can be extremely large. Current wet cooling technologies such as cooling towers lose water from evaporation. One alternative to prevent this would be to implement a radiative cooling system. More specifically, a system that utilizes the volumetric radiation emission from water to the night sky could be implemented. This thesis analyzes the validity of a radiative cooling system that uses direct radiant emission to cool water. A brief study on potential infrared transparent cover materials such as polyethylene (PE) and polyvinyl carbonate (PVC) was performed. Also, two different experiments to determine the cooling power from radiation were developed and run. The results showed a minimum cooling power of 33.7 W/m2 for a vacuum insulated glass system and 37.57 W/m2 for a tray system with a maximum of 98.61 Wm-2 at a point when conduction and convection heat fluxes were considered to be zero. The results also showed that PE proved to be the best cover material. The minimum numerical results compared well with other studies performed in the field using similar techniques and materials. The results show that a radiative cooling system for a power plant could be feasible given that the cover material selection is narrowed down, an ample amount of land is available and an economic analysis is performed proving it to be cost competitive with conventional systems.
ContributorsOvermann, William (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Taylor, Robert (Committee member) / Arizona State University (Publisher)
Created2011
Description
A recent joint study by Arizona State University and the Arizona Department of Transportation (ADOT) was conducted to evaluate certain Warm Mix Asphalt (WMA) properties in the laboratory. WMA material was taken from an actual ADOT project that involved two WMA sections. The first section used a foamed-based WMA admixture, and the second section used a chemical-based WMA admixture. The rest of the project included control hot mix asphalt (HMA) mixture. The evaluation included testing of field-core specimens and laboratory compacted specimens. The laboratory specimens were compacted at two different temperatures; 270 °F (132 °C) and 310 °F (154 °C). The experimental plan included four laboratory tests: the dynamic modulus (E*), indirect tensile strength (IDT), moisture damage evaluation using AASHTO T-283 test, and the Hamburg Wheel-track Test. The dynamic modulus E* results of the field cores at 70 °F showed similar E* values for control HMA and foaming-based WMA mixtures; the E* values of the chemical-based WMA mixture were relatively higher. IDT test results of the field cores had comparable finding as the E* results. For the laboratory compacted specimens, both E* and IDT results indicated that decreasing the compaction temperatures from 310 °F to 270 °F did not have any negative effect on the material strength for both WMA mixtures; while the control HMA strength was affected to some extent. It was noticed that E* and IDT results of the chemical-based WMA field cores were high; however, the laboratory compacted specimens results didn't show the same tendency. The moisture sensitivity findings from TSR test disagreed with those of Hamburg test; while TSR results indicated relatively low values of about 60% for all three mixtures, Hamburg test results were quite excellent. In general, the results of this study indicated that both WMA mixes can be best evaluated through field compacted mixes/cores; the results of the laboratory compacted specimens were helpful to a certain extent. The dynamic moduli for the field-core specimens were higher than for those compacted in the laboratory. The moisture damage findings indicated that more investigations are needed to evaluate moisture damage susceptibility in field.
ContributorsAlossta, Abdulaziz (Author) / Kaloush, Kamil (Thesis advisor) / Witczak, Matthew W. (Committee member) / Mamlouk, Michael S. (Committee member) / Arizona State University (Publisher)
Created2011