Matching Items (28)
Filtering by
- All Subjects: Sustainability
- Creators: Parrish, Kristen
Description
Wind measurements are fundamental inputs for the evaluation of potential energy yield and performance of wind farms. Three-dimensional scanning coherent Doppler lidar (CDL) may provide a new basis for wind farm site selection, design, and control. In this research, CDL measurements obtained from multiple wind energy developments are analyzed and a novel wind farm control approach has been modeled. The possibility of using lidar measurements to more fully characterize the wind field is discussed, specifically, terrain effects, spatial variation of winds, power density, and the effect of shear at different layers within the rotor swept area. Various vector retrieval methods have been applied to the lidar data, and results are presented on an elevated terrain-following surface at hub height. The vector retrieval estimates are compared with tower measurements, after interpolation to the appropriate level. CDL data is used to estimate the spatial power density at hub height. Since CDL can measure winds at different vertical levels, an approach for estimating wind power density over the wind turbine rotor-swept area is explored. Sample optimized layouts of wind farm using lidar data and global optimization algorithms, accounting for wake interaction effects, have been explored. An approach to evaluate spatial wind speed and direction estimates from a standard nested Coupled Ocean and Atmosphere Mesoscale Prediction System (COAMPS) model and CDL is presented. The magnitude of spatial difference between observations and simulation for wind energy assessment is researched. Diurnal effects and ramp events as estimated by CDL and COAMPS were inter-compared. Novel wind farm control based on incoming winds and direction input from CDL's is developed. Both yaw and pitch control using scanning CDL for efficient wind farm control is analyzed. The wind farm control optimizes power production and reduces loads on wind turbines for various lidar wind speed and direction inputs, accounting for wind farm wake losses and wind speed evolution. Several wind farm control configurations were developed, for enhanced integrability into the electrical grid. Finally, the value proposition of CDL for a wind farm development, based on uncertainty reduction and return of investment is analyzed.
ContributorsKrishnamurthy, Raghavendra (Author) / Calhoun, Ronald J (Thesis advisor) / Chen, Kangping (Committee member) / Huang, Huei-Ping (Committee member) / Fraser, Matthew (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2013
Description
Among the various end-use sectors, the commercial sector is expected to have the second-largest increase in total primary energy consump¬tion from 2009 to 2035 (5.8 quadrillion Btu) with a growth rate of 1.1% per year, it is the fastest growing end-use sectors. In order to make major gains in reducing U.S. building energy use commercial sector buildings must be improved. Energy benchmarking of buildings gives the facility manager or the building owner a quick evaluation of energy use and the potential for energy savings. It is the process of comparing the energy performance of a building to standards and codes, to a set target performance or to a range of energy performance values of similar buildings in order to help assess opportunities for improvement. Commissioning of buildings is the process of ensuring that systems are designed, installed, functionally tested and capable of being operated and maintained according to the owner's operational needs. It is the first stage in the building upgrade process after it has been assessed using benchmarking tools. The staged approach accounts for the interactions among all the energy flows in a building and produces a systematic method for planning upgrades that increase energy savings. This research compares and analyzes selected benchmarking and retrocommissioning tools to validate their accuracy such that they could be used in the initial audit process of a building. The benchmarking study analyzes the Energy Use Intensities (EUIs) and Ratings assigned by Portfolio Manager and Oak Ridge National Laboratory (ORNL) Spreadsheets. The 90.1 Prototype models and Commercial Reference Building model for Large Office building type were used for this comparative analysis. A case-study building from the DOE - funded Energize Phoenix program was also benchmarked for its EUI and rating. The retrocommissioning study was conducted by modeling these prototype models and the case-study building in the Facility Energy Decision System (FEDS) tool to simulate their energy consumption and analyze the retrofits suggested by the tool. The results of the benchmarking study proved that a benchmarking tool could be used as a first step in the audit process, encouraging the building owner to conduct an energy audit and realize the energy savings potential. The retrocommissioning study established the validity of FEDS as an accurate tool to simulate a building for its energy performance using basic inputs and to accurately predict the energy savings achieved by the retrofits recommended on the basis of maximum LCC savings.
ContributorsAgnihotri, Shreya Prabodhkumar (Author) / Reddy, T Agami (Thesis advisor) / Bryan, Harvey (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2011
Description
The objective for Under the Camper Shell was to build a prototype of a full living environment within the confines of a pickup truck bed and camper shell. The total volume available to work with is approximately 85ft3. This full living environment entails functioning systems for essential modern living, providing shelter and spaces for cooking, sleeping, eating, and sanitation. The project proved to be very challenging from the start. First, the livable space is extremely small, being only tall enough for one to sit up straight. The truck and camper shell were both borrowed items, so no modifications were allowed for either, e.g. drilling holes for mounting. The idea was to create a system that could be easily removed, transforming it from a camper to a utility truck. The systems developed for the living environment would be modular and transformative so to accommodate for different necessities when packing. The goal was to create a low-water system with sustainability in mind. Insulating the space was the largest challenge and the most rewarding, using body heat to warm the space and insulate from the elements. Comfort systems were made of high density foam cushions in sections to allow folding and stacking for different functions (sleeping, lounging, and sitting). Sanitation is necessary for healthy living and regular human function. A composting toilet was used for the design, lending to low-water usage and is sustainable over time. Saw dust would be necessary for its function, but upon composting, the unit will generate sufficient amounts of heat to act as a space heater. Showering serves the functions of exfoliation and ridding of bacteria, both of which bath wipes can accomplish, limiting massive volumes of water storage and waste. Storage systems were also designed for modularity. Hooks were installed the length of the bed for hanging or securing items as necessary. Some are available for hanging bags. A cabinetry rail also runs the length of the bed to allow movement of hard storage to accommodate different scenarios. The cooking method is called "sous-vide", a method of cooking food in air-tight bags submerged in hot water. The water is reusable for cooking and no dishes are necessary for serving. Overall, the prototype fulfilled its function as a full living environment with few improvements necessary for future use.
ContributorsLimsirichai, Pimwadee (Author) / Foy, Joseph (Thesis director) / Parrish, Kristen (Committee member) / Barrett, The Honors College (Contributor) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor)
Created2014-12
Description
Every year hundreds of people are trading in their cubicle to experience the freedom of an open road in a van home. The van life movement is growing rapidly as people seek more sustainable, adventurous, and financially effective ways of life. Many van lifers pursue the luxury of time over the luxury of money. Others fund their journey by working remote jobs from the comfort of their van home while parked next to their favorite waterfall. These camper vans are unique in their minimalist, interior designs as well as their energy efficient systems. This project encompassed the design of an off-grid camper van while following set guidelines of only using clean energy sources for power and including low weight items within the van. My design is showcased with a SolidWorks model and is equipped with a solar panel awning, a rainwater collection system, and a full bathroom with a solar shower. The design includes a general wiring diagram and recommendations for all materials and features to incorporate in the build. In addition, a downloadable bill of materials and website were created to show how this nomadic lifestyle can be achieved by those eager to travel and meet new people. As I begin my own van build and embark on my journey, this website will be updated to share my findings and connect with the larger community currently involved in their own venture or curious about starting their own build. The greatest moments in life will be outside your comfort zone so choose to take that step and embrace the experience.
ContributorsScott, Branson (Author) / Phelan, Patrick (Thesis director) / Nelson, Jacob (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The research analyzes the transformation of wasted thermal energy into a usable form through thermogalvanic devices. This technology helps mitigate international growing energy demands. Building energy efficiency is a critical research topic, since the loads account for 40% of all energy demand in developed nations, and 30% in less developed nations. A significant portion of the energy consumed for heating and cooling, where a majority is dissipated to the ambient as waste heat. This research answers how much power output (µW·cm-2) can the thermogalvanic brick experimentally produce from an induced temperature gradient? While there are multiple avenues for the initial and optimized prototype design, one key area of interest relating to thermogalvanic devices is the effective surface area of the electrodes. This report highlights the experimental power output measurements of a Cu/Cu2+ thermogalvanic brick by manipulating the effective surface area of the electrodes. Across three meshes, the maximum power output normalized for temperature was found to be between 2.13-2.87 x 10-3 μWcm-2K-2. The highest normalized power output corresponded to the mesh with the highest effective surface area, which was classified as the fine mesh. This intuitively aligned with the theoretical understanding of surface area and maximum power output, where decreasing the activation resistance also reduces the internal resistance, which increases the theoretical maximum power.
ContributorsKiracofe, Ryan Moore (Author) / Phelan, Patrick (Thesis director) / El Asmar, Mounir (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
This project is focused on local scale sustainability. The goal is to understand the impact of small unsustainable actions of people, and hopefully create a change in their habits. The focus was plastic usage, such as the use of water bottles, grocery bags, or even the packaging that our food and other products typically come in. Plastic has become an integral part of lives, where we do not even think of our actions as we stuff our leftover grocery bags in its designated drawer. My goal throughout this project was to guide people to an environmentally conscious lifestyle by increasing the likelihood of recycling on the ASU campus. I created an interactive informative presentation that focused on recycling and preventing plastic and unwanted trash from ending up in landfills and oceans. The presentation was given to a small group of participants along with two surveys. There was a survey provided before the presentation to gauge a participant's present recycling habits then there was a survey that was given some time after the presentation to track if certain recycling habits had changed due to the presentation. The post presentation survey did report that there were changes to some of the participants' recycling habits. The research provides suggestions to help increase recycling and waste prevention based off surveys that were widely distributed on campus. The top three suggestions that would help make recycling more prevalent on campus are: education on the subject, more accessibility to recycling bins, and creating an incentive program.
ContributorsVazquez, Juliana Evone (Author) / Parrish, Kristen (Thesis director) / Burke, Rebekah (Committee member) / Civil, Environmental and Sustainable Engineering Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
The beginnings of this paper developed from the initial question of: how can tribal nations create private economies on their reservations? Written and researched from an undergraduate student perspective, this paper begins to answer the question by analyzing the historical and current states of Indian Country's diverse tribal economies. Additionally, this paper will identify various tribal economic development challenges with a specific emphasis on education attainment as a key factor. Then, a solution will be presented in the form of a tribal business program modeled within the W.P. Carey School of Business at Arizona State University located in Tempe, Arizona. The solution is grounded in the idea that a highly qualified workforce is the best resource for economic development.
ContributorsTso, Cora Lee (Author) / Miller, Robert (Thesis director) / Hillman, Amy (Committee member) / School of Politics and Global Studies (Contributor) / American Indian Studies Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
During the 1970's to 90's, scholars in the fields of Jewish Studies, anthropology and sociology (notably, Hellen Epstein, Larry Langer and Yosef Yerushalmi), developed the idea of generational trauma theory, when analyzing the trauma inflicted upon European Jewish populations during the Holocaust. Epstein argues that trauma is passed down from generation to generation, while Langer argues that the second generation interprets the trauma in their own way. Other important terms in trauma theory include liturgical time, sites of memory, historical trauma and the historical trauma response. Scholars who analyze American Indian communities, like Yellow Horse Brave Heart and Durran/Durran, readily took up this theory, applying it to the Native American experience. One area where this theory has been applied to is the Native American Boarding School experience. The purpose of this paper is to analyze the efficacy of applying the post-Holocaust trauma theory to the Native American boarding school experience. In order to determine the effectiveness of the boarding schools, one must analyze the boarding school experience, beginning at the philosophical underpinnings of the boarding school, and then discussing the impacts that the boarding schools had on the students and finally, the impact that this had on the second generation. However, this approach has a number of flaws, such as the differences between native communities and post-Holocaust, American, Jewish communities, as discussed in the Philosophy of American Indian Studies. The length of the boarding schools was also longer than the length of the Holocaust. The fact that Native Americans faced repeated trauma, in a way that post-Holocaust American Jews did not. The trauma also changed for both native peoples and post-Holocaust Jews, making it difficult for there to be a single response to trauma. The philosophical bases of the Holocaust and boarding schools were also different. The post-Holocaust generational trauma approach also has a number of applications to native peoples. This includes the psychological aspect of trauma. The use of terminology by native scholars. Native peoples also developed concepts like sites of memory and liturgical time. Finally, both the post-Holocaust Jewas and Native Americans have used trauma for political ends. The conclusion is that post-Holocaust generational trauma theory has some applications to native peoples, but the application is limited. A scholar must take into careful consideration the native peoples who they are working with.
ContributorsMongeau, Michael Philip (Author) / Benkert, Volker (Thesis director) / Riding In, James (Committee member) / School of Historical, Philosophical and Religious Studies (Contributor) / American Indian Studies Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
The ecological benefits provided by trees include improving air quality (Nowak, et. al., 2006), mitigating climate change by sequestering carbon (Nowak, 1993), providing animal habitats (Livingston, et. al., 2003), and reducing heat (Edmonson, 2016), among others. Trees also provide numerous social benefits, impacting urban sustainability in particular by improving human health (Salmond, 2016), aesthetically and economically improving neighborhoods (Torres, 2012), and contributing to thriving communities by creating gathering spaces and even reducing crime (Abraham, et. al., 2010). Because of the tremendous potential of trees to provide social and ecological services, particularly in urban areas, tree planting has become an important facet of many sustainability initiatives. This thesis assesses one such initiative aimed at planting trees for the diverse benefits they provide. Valley Permaculture Alliance (VPA), a nonprofit based in Phoenix, Arizona, is known for its Shade Tree Program. The author conducted an internal, quantitative assessment of the program between August and December of 2015. The assessment included evaluation of several indicators of ecological and community health related to the presence of shade trees, culminating in a report released in 2016. This paper evaluates the use of sustainability indicators in the VPA assessment as well as their value in different types of organizations. It culminates with an assessment of VPA's strengths, challenges faced by the organization, and suggestions for its future development.
ContributorsJones, Michaela Martine (Author) / Larson, Kelli (Thesis director) / Eakin, Hallie (Committee member) / School of Sustainability (Contributor) / American Indian Studies Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Building construction, design and maintenance is a sector of engineering where improved efficiency will have immense impacts on resource consumption and environmental health. This research closely examines the Leadership in Environment and Energy Design (LEED) rating system and the International Green Construction Code (IgCC). The IgCC is a model code, written with the same structure as many building codes. It is a standard that can be enforced if a city's government decides to adopt it. When IgCC is enforced, the buildings either meet all of the requirements set forth in the document or it fails to meet the code standards. The LEED Rating System, on the other hand, is not a building code. LEED certified buildings are built according to the standards of their local jurisdiction and in addition to that, building owners can chose to pursue a LEED certification. This is a rating system that awards points based on the sustainable measures achieved by a building. A comparison of these green building systems highlights their accomplishments in terms of reduced electricity usage, usage of low-impact materials, indoor environmental quality and other innovative features. It was determined that in general IgCC is more holistic, stringent approach to green building. At the same time the LEED rating system a wider variety of green building options. In addition, building data from LEED certified buildings was complied and analyzed to understand important trends. Both of these methods are progressing towards low-impact, efficient infrastructure and a side-by-side comparison, as done in this research, shed light on the strengths and weaknesses of each method, allowing for future improvements.
ContributorsCampbell, Kaleigh Ruth (Author) / Chong, Oswald (Thesis director) / Parrish, Kristen (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05