Matching Items (26)
Filtering by
- All Subjects: Sustainability
- Creators: Mechanical and Aerospace Engineering Program
DescriptionThe heat island effect has resulted in an observational increase in averave ambient as well as surface temperatures and current photovoltaic implementation do not migitate this effect. Thus, the feasibility and performance of alternative solutions are explored and determined using theoretical, computational data.
ContributorsCoyle, Aidan John (Author) / Trimble, Steven (Thesis director) / Underwood, Shane (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
As society's energy crisis continues to become more imminent many industries and niches are seeking a new, sustainable and renewable source of electricity production. Similar to solar, wind and tidal energy, kinetic energy has the potential to generate electricity as an extremely renewable source of energy generation. While stationary bicycles can generate small amounts of electricity, the idea behind this project was to expand energy generation into the more common weight lifting side of exercising. The method for solving this problem was to find the average amount of power generated per user on a Smith machine and determine how much power was available from an accompanying energy generator. The generator consists of three phases: a copper coil and magnet generator, a full wave bridge rectifying circuit and a rheostat. These three phases working together formed a fully functioning controllable generator. The resulting issue with the kinetic energy generator was that the system was too inefficient to serve as a viable system for electricity generation. The electrical production of the generator only saved about 2 cents per year based on current Arizona electricity rates. In the end it was determined that the project was not a sustainable energy generation system and did not warrant further experimentation.
ContributorsO'Halloran, Ryan James (Author) / Middleton, James (Thesis director) / Hinrichs, Richard (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / The Design School (Contributor) / School of Mathematical and Statistical Sciences (Contributor)
Created2014-05
Description
The main goal of this study was to understand the awareness of small business owners regarding occupational fraud, meaning fraud committed from within an organization. A survey/questionnaire was used to gather insight into the knowledge and perceptions of small business owners, while also obtaining information about the history of fraud and the internal controls within their business. Twenty-four owners of businesses with less than 100 employees participated in the study. The results suggest that small business owners overestimate their knowledge regarding internal controls and occupational fraud, while also underestimating the risk of fraud within their own business. In fact, 92% of participants were not at all familiar with the popular Internal Control \u2014 Integrated Framework published by the Committee of Sponsoring Organizations of the Treadway Commission. The results also show that small business owners tend to overestimate the protection provided by their currently implemented controls in regard to their risk of fraud. Overall, through continued knowledge of internal controls and occupational fraud, business owners can better protect their businesses from the risk of occupational fraud by increasing their awareness of fraud.
ContributorsDennis, Lauren Nicole (Author) / Orpurt, Steven (Thesis director) / Munshi, Perseus (Committee member) / Barrett, The Honors College (Contributor) / Department of Information Systems (Contributor) / School of Accountancy (Contributor)
Created2014-05
Description
This honors thesis examines community gardens from throughout Phoenix, Arizona. It shows that community gardens have the potential to both support and hinder sustainability efforts, encourage community development, and increase food access. By measuring the temperature at various community gardens throughout Phoenix, AZ, community gardens were shown to minimize local effects of the urban heat island. Because they use water to survive and Phoenix, AZ is in a desert, this contributes to a depleting water supply. Interviews of gardeners from community gardens throughout Phoenix depicted that community gardens can provide sites for community development as well as promoting food access.
ContributorsBowersox, Diane Kathleen (Author) / Haglund, LaDawn (Thesis director) / Lyon, Mich (Committee member) / Barrett, The Honors College (Contributor) / WPC Graduate Programs (Contributor) / School of Accountancy (Contributor) / School of Politics and Global Studies (Contributor)
Created2014-05
Description
Over the last century, society has begun to acknowledge and observe how human actions are negatively impacting the environment. Sustainable living is becoming more adopted into daily lives, including a focus on waste management and recycling. Previous informal studies have proposed that coffee grounds can be recycled and added to the soil to increase plant productivity. The objective of this experiment was to test how different concentrations of roasted coffee grounds would affect the overall plant productivity when introduced in the soil of various plant types and environmental atmospheres. Three treatments were selected (100% potting mix, 50% potting mix/50% coffee grounds, and 25% potting mix/75% coffee grounds) and applied to 3 acid-tolerating plants (radish, basil, and parsley). Each of these treatments were grown in 2 different environments, where one was planted in a Tempe, AZ backyard while the other group was planted in a lab environment, locating at Arizona State University's Tempe Campus. Each plant with its respective treatments (plant type, coffee ground treatment, and environment) had 10 identical plants for statistical accuracy, resulting in a total of 180 plants grown, observed, and analyzed for this 3-month long experiment. The plant development, plant height, length of roots, quantity of leaves, and environmental observations were recorded and used to define plant productivity in this investigation. The experiment demonstrated low survival rates in all groups including the control group, suggesting a flaw in the experimental design. Nonetheless, the experiment showed that among the surviving plants, the 75% treatment had the largest negative impact on plant productivity. The measured root lengths and leaf quantity had various results across each plant group, leaving the hypothesis unverified. Overall, the experiment was effective in demonstrating negative impacts of great concentrations of coffee grounds when introduced to various plants, but further investigation with an adjusted experimental design will need to be completed to reach a reliable conclusion.
ContributorsVan Winkle, Delaney Dare (Author) / Bang, Christofer (Thesis director) / Fox, Peter (Committee member) / Earl, Stevan (Committee member) / School of Sustainability (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
The purpose of this research is to study the effect of angle of acceptance and mechanical control system noise on the power available to a two-axis solar concentrating photovoltaic (CPV) system. The efficiency of a solar CPV system is greatly dependent on the accuracy of the tracking system because a strong focal point is needed to concentrate incident solar irradiation on the small, high efficiency cells. The objective of this study was to evaluate and quantify tracking accuracy for a performance model which would apply to similar two-axis systems. An analysis comparing CPV to traditional solar photovoltaics from an economic standpoint was conducted as well to evaluate the viability of emerging CPV technology. The research was performed using two calibrated solar radiation sensors mounted on the plane of the tracking system, normal to the sun. One sensor is held at a constant, normal angle (0 degrees) and the other is varied by a known interior angle in the range of 0 degrees to 10 degrees. This was to study the magnitude of the decrease in in irradiance as the angle deviation increases. The results show that, as the interior angle increases, the solar irradiance and thus available power available on the focal point will decrease roughly at a parabolic rate, with a sharp cutoff point at angles greater than 5 degrees. These findings have a significant impact on CPV system tracking mechanisms, which require high precision tracking in order to perform as intended.
ContributorsPodzemny, Dominic James (Author) / Reddy, Agami (Thesis director) / Kelman, Jonathan (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Within this paper I summarize the key features, and results, of research conducted to support the development, design, and implementation of an internal control system at a startup small business. These efforts were conducted for an Honors Thesis/Creative Project for Barrett, the Honors College at Arizona State University. The research revolved around deciding which financial policies, procedures, and safeguards could be useful in creating an internal control system for small businesses. In addition to academic research, I developed an “Internal Control Questionnaire” for use as a ‘jumping off point’ in conversations about a business’ existing accounting system. This questionnaire is applicable across many industries, covering the major topics which every small business/startup should consider.
The questionnaire was then used in conjunction with two interviews of small business owners. The interviews covered both the overall financial status of their business and their business’ pre-existing accounting system. The feedback received during these interviews was subsequently used to provide the business owners with eleven recommendations ranging from the implementation of new policies to verification of existing internal controls.
Finally, I summarize my findings, both academic and real-world, conveying that many small business owners do not implement formal internal control systems. I also discuss why the business owners, in this specific circumstance, did not yet implement the aforementioned eleven suggestions.
The questionnaire was then used in conjunction with two interviews of small business owners. The interviews covered both the overall financial status of their business and their business’ pre-existing accounting system. The feedback received during these interviews was subsequently used to provide the business owners with eleven recommendations ranging from the implementation of new policies to verification of existing internal controls.
Finally, I summarize my findings, both academic and real-world, conveying that many small business owners do not implement formal internal control systems. I also discuss why the business owners, in this specific circumstance, did not yet implement the aforementioned eleven suggestions.
ContributorsDuncan, Spencer James (Author) / Garverick, Michael (Thesis director) / Casas Arce, Pablo (Committee member) / School of Accountancy (Contributor) / School of International Letters and Cultures (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The research analyzes the transformation of wasted thermal energy into a usable form through thermogalvanic devices. This technology helps mitigate international growing energy demands. Building energy efficiency is a critical research topic, since the loads account for 40% of all energy demand in developed nations, and 30% in less developed nations. A significant portion of the energy consumed for heating and cooling, where a majority is dissipated to the ambient as waste heat. This research answers how much power output (µW·cm-2) can the thermogalvanic brick experimentally produce from an induced temperature gradient? While there are multiple avenues for the initial and optimized prototype design, one key area of interest relating to thermogalvanic devices is the effective surface area of the electrodes. This report highlights the experimental power output measurements of a Cu/Cu2+ thermogalvanic brick by manipulating the effective surface area of the electrodes. Across three meshes, the maximum power output normalized for temperature was found to be between 2.13-2.87 x 10-3 μWcm-2K-2. The highest normalized power output corresponded to the mesh with the highest effective surface area, which was classified as the fine mesh. This intuitively aligned with the theoretical understanding of surface area and maximum power output, where decreasing the activation resistance also reduces the internal resistance, which increases the theoretical maximum power.
ContributorsKiracofe, Ryan Moore (Author) / Phelan, Patrick (Thesis director) / El Asmar, Mounir (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The goal of this research was to analyze the impact of consumer behavior on the sustainability of the fast fashion industry, specifically in regards to the framework of the Triple Bottom Line. First, a review of relevant literature investigating the three aspects of the Triple Bottom Line (environmental, social, and economic) as it pertains to the fast fashion industry was conducted to provide context for this research. Research methods utilized scholarly articles and journals along with companies’ CSR reports to determine the course of development of the fast fashion industry over time. Additionally, the impact of consumer behavior was investigated and linked to trends observed in the production and business practices of the industry over time. Based on the analysis of the influence of past consumer behavior on the industry, it was clear consumers play a major role in the industry and its sustainability in terms of the Triple Bottom Line. This suggests that the unsustainability of the fast fashion industry is due in part to consumer behavior and the retailers themselves, which is important to understand for the industry going forward as it aims to improve overall sustainability.
ContributorsStoller, MacKenzie (Co-author) / Beltran, Gabriella (Co-author) / O'Flaherty, Katherine (Thesis director) / Sewell, Dennita (Committee member) / School of Accountancy (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
This thesis project has been conducted in accordance with The Founder’s Lab initiative which is sponsored by the W. P. Carey School of Business. This program groups three students together and tasks them with creating a business idea, conducting the necessary research to bring the concept to life, and exploring different aspects of business, with the end goal of gaining traction. The product we were given to work through this process with was Hot Head, an engineering capstone project concept. The Hot Head product is a sustainable and innovative solution to the water waste issue we find is very prominent in the United States. In order to bring the Hot Head idea to life, we were tasked with doing research on topics ranging from the Hot Head life cycle to finding plausible personas who may have an interest in the Hot Head product. This paper outlines the journey to gaining traction via a marketing campaign and exposure of our brand on several platforms, with a specific interest in website traffic. Our research scope comes from mainly primary sources like gathering opinions of potential buyers by sending out surveys and hosting focus groups. The paper concludes with some possible future steps that could be taken if this project were to be continued.
ContributorsRote, Jennifer Ashley (Co-author) / Goodall, Melody (Co-author) / Lozano Porras, Mariela (Co-author) / Byrne, Jared (Thesis director) / Sebold, Brent (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05