Filtering by
- All Subjects: Technology
- All Subjects: Sustainability
- Status: Published
To gain insight into the state of the industry and current position of independent bookstores, I will first examine the past fifty years of the brick-and-mortar bookstore, followed by a Porter’s Five Forces analysis of the industry threats and a SWOT analysis to compare the strengths and weaknesses of independent bookstores. Next, the patrons of independent bookstores will be discussed with a focus on the two largest consumer groups of Millennials and Baby Boomers, their characteristics, and the opportunities they provide to bookstores. After this there will be an exploration of the competitors to brick-and-mortar bookstores, focusing on Amazon and then touching on some of the other rivals to bookstores’ consumer base. The next section will be an in-depth analysis of a variety of bookstores across the United States, with attention to their successful practices, goals, concerns, and failures. First, there will be a comparison of industry success and failure through case studies of Borders and Powell’s bookstores. Next, there will be a comparison of five beloved independent bookstores across the country to share their varied competitive advantages that are the secret to their success. Finally, there are primary source interviews with the employees of three major Phoenix bookstores, which provide insight into the goals, current projects, attitudes, and inner strengths of these businesses. Finally, the thesis will conclude with a section offering solutions and suggestions for independent bookstores to pursue based on the primary and secondary research discussed above. These recommendations are focused on five key areas:
• Community
• Consumers
• Store Design
• Technology
• Diversification
Ultimately, the information provided by this research and these interviews indicates that while vital business changes are being pursued by independent and chain bookstores across the United States, the independent bookstore shows no signs of disappearing in favor of online vendors or e-readers.
Human beings have long sought to conquer the unconquerable and to push the boundaries of human endurance. There are few such endeavors more challenging than venturing into the coldest and harshest environments on the planet. The challenges these adventurers face are nearly countless, but one that is often underestimated is the massive risk of dehydration in high mountains and the lack of sufficient technology to meet this important need. Astronauts and mountaineers of NASA's Johnson Space Center have created a technology that solves this problem: a freeze-resistant hydration system that helps stop water from freezing at sub-zero temperatures by using cutting-edge technology and materials science to insulate and heat enough water to prevent dehydration over the course of the day, so that adventurers no longer need to worry about their equipment stopping them. This patented technology is the basis of the founding of Aeropak, an advanced outdoor hydration brand developed by three ASU students (Kendall Robinson, Derek Stein, and Thomas Goers) in collaboration with W.P. Carey’s Founder’s Lab. The primary goal was to develop traction among winter sport enthusiasts to create a robust customer base and evaluate the potential for partnership with hydration solution companies as well as direct sales through online and brick-and-mortar retail avenues. To this end, the Aeropak team performed market research to determine the usefulness and need for the product through a survey sent out to a number of outdoor sporting clubs on Arizona State University’s campus. After determining an interest in a potential product, the team developed a marketing strategy and business model which was executed through Instagram as well as a standalone website, with the goal of garnering interest and traction for a future product. Future goals of the project will be to bring a product to market and expand Aeropak’s reach into a variety of winter sport subcommunities, as well as evaluate the potential for further expansion into large-scale retailers and collaboration with established companies.
This thesis project has been conducted in accordance with The Founder’s Lab initiative which is sponsored by the W. P. Carey School of Business. This program groups three students together and tasks them with creating a business idea, conducting the necessary research to bring the concept to life, and exploring different aspects of business, with the end goal of gaining traction. The product we were given to work through this process with was Hot Head, an engineering capstone project concept. The Hot Head product is a sustainable and innovative solution to the water waste issue we find is very prominent in the United States. In order to bring the Hot Head idea to life, we were tasked with doing research on topics ranging from the Hot Head life cycle to finding plausible personas who may have an interest in the Hot Head product. This paper outlines the journey to gaining traction via a marketing campaign and exposure of our brand on several platforms, with a specific interest in website traffic. Our research scope comes from mainly primary sources like gathering opinions of potential buyers by sending out surveys and hosting focus groups. The paper concludes with some possible future steps that could be taken if this project were to be continued.
This thesis project has been conducted in accordance with The Founder’s Lab initiative which is sponsored by the W. P. Carey School of Business. This program groups three students together and tasks them with creating a business idea, conducting the necessary research to bring the concept to life, and exploring different aspects of business, with the end goal of gaining traction. The product we were given to work through this process with was Hot Head, an engineering capstone project concept. The Hot Head product is a sustainable and innovative solution to the water waste issue we find is very prominent in the United States. In order to bring the Hot Head idea to life, we were tasked with doing research on topics ranging from the Hot Head life cycle to finding plausible personas who may have an interest in the Hot Head product. This paper outlines the journey to gaining traction via a marketing campaign and exposure of our brand on several platforms, with a specific interest in website traffic. Our research scope comes from mainly primary sources like gathering opinions of potential buyers by sending out surveys and hosting focus groups. The paper concludes with some possible future steps that could be taken if this project were to be continued.
This thesis project has been conducted in accordance with The Founder’s Lab initiative which is sponsored by the W. P. Carey School of Business. This program groups three students together and tasks them with creating a business idea, conducting the necessary research to bring the concept to life, and exploring different aspects of business, with the end goal of gaining traction. The product we were given to work through this process with was Hot Head, an engineering capstone project concept. The Hot Head product is a sustainable and innovative solution to the water waste issue we find is very prominent in the United States. In order to bring the Hot Head idea to life, we were tasked with doing research on topics ranging from the Hot Head life cycle to finding plausible personas who may have an interest in the Hot Head product. This paper outlines the journey to gaining traction via a marketing campaign and exposure of our brand on several platforms, with a specific interest in website traffic. Our research scope comes from mainly primary sources like gathering opinions of potential buyers by sending out surveys and hosting focus groups. The paper concludes with some possible future steps that could be taken if this project were to be continued.
When you are sitting at the terminal waiting for your flight or taking the bus to get to work, have you ever thought about who used your seat last? More importantly, have you ever thought about the last time that seat was cleaned? Sadly, it is uncertain to see if it was properly sanitized in the last hour, yesterday, in the last week, or even last month. Especially during these tough times, everyone wants to be assured that they are always in a safe and healthy environment. Through the Founders Lab, our team is collaborating with an engineering capstone team to bring automated seat cleaning technology into the market. This product is a custom-designed seat cover that is tear-resistant and provides a sanitary surface for anyone to sit on. When someone leaves the seat, a pressure sensor is triggered, and the cover is replaced with a secondary cover that was stored in a UV radiated container. The waterproof fabric and internal filters prevent spills and food crumbs from remaining when the user changes. The reason for bringing this product into the market is due to the unsanitary conditions in many high traffic areas. This technology can be implemented in public transportation, restaurants, sports stadiums, and much more. It will instantly improve the efficiency of sanitation for many businesses and keep a promise to its users that they will never bring something they sat on back home. #Safeseating
There are quite a few readily available products that one can buy if one looks past some of their flaws. A lot of these alarms either require a user to carry an extra communication device, or they are too big or expensive. The proposed solution merges all desirable features of a bike alarm into one module. In light of this, surveys were conducted to ascertain what these qualities would need to be. The top considerations for purchasing this alarm were how costly it would be, the false detection rate, and also the battery life. Additionally, the features that were most requested was the inclusion of a GPS and a camera. In order to incorporate these features, a three year plan was formulated which would culminate into a bike network in which each bike could communicate with other bikes. This would allow for an IOT network to be established, thus far exceeding expectations. The price point for this alarm is USD $10.00-15.00 and can come in a variety of colors. Additionally, this concept can be applied to many different scenarios, from protecting boats/jet skis and other aquatic vehicles, to houses as well. Furthermore, one could miniaturize this technology to be used in jewelry or accessories.