Matching Items (190)
Filtering by

Clear all filters

152020-Thumbnail Image.png
Description
The purpose of this pilot randomized control trial was to test the initial efficacy of a 10 week social cognitive theory (SCT)-based intervention to reduce workplace sitting time (ST). Participants were currently employed adults with predominantly sedentary occupations (n=24) working in the Greater Phoenix area in 2012-2013. Participants wore an

The purpose of this pilot randomized control trial was to test the initial efficacy of a 10 week social cognitive theory (SCT)-based intervention to reduce workplace sitting time (ST). Participants were currently employed adults with predominantly sedentary occupations (n=24) working in the Greater Phoenix area in 2012-2013. Participants wore an activPAL (AP) inclinometer to assess postural allocation (i.e., sitting vs. standing) and Actigraph accelerometer (AG) to assess sedentary time for one week prior to beginning and immediately following the completion of the 10 week intervention. Self-reported measures of sedentary time were obtained via two validated questionnaires for overall (International Physical Activity Questionnaire [IPAQ]) and domain specific sedentary behaviors (Sedentary Behavior Questionnaire [SBQ]). SCT constructs were also measured pre and post via adapted physical activity questionnaires. Participants were randomly assigned to receive either (a) 10 weekly social cognitive-based e-newsletters focused on reducing workplace ST; or (b) similarly formatted 10 weekly e-newsletters focusing on health education. Baseline adjusted Analysis of Covariance statistical analyses were used to examine differences between groups in time spent sitting (AP) and sedentary (AG) during self-reported work hours from pre- to post- intervention. Both groups decreased ST and AG sedentary time; however, no significant differences were observed. SCT constructs also did not change significantly between pretest and post test in either group. These results indicate that individualized educational approaches to decreasing workplace sitting time may not be sufficient for observing long term change in behaviors. Future research should utilize a larger sample, measure main outcomes more frequently, and incorporate more environmental factors throughout the intervention.
ContributorsGordon, Amanda (Author) / Buman, Matthew (Thesis advisor) / Der Ananian, Cheryl (Committee member) / Swan, Pamela (Committee member) / Arizona State University (Publisher)
Created2013
151687-Thumbnail Image.png
Description

In recent years, an increase of environmental temperature in urban areas has raised many concerns. These areas are subjected to higher temperature compared to the rural surrounding areas. Modification of land surface and the use of materials such as concrete and/or asphalt are the main factors influencing the surface energy

In recent years, an increase of environmental temperature in urban areas has raised many concerns. These areas are subjected to higher temperature compared to the rural surrounding areas. Modification of land surface and the use of materials such as concrete and/or asphalt are the main factors influencing the surface energy balance and therefore the environmental temperature in the urban areas. Engineered materials have relatively higher solar energy absorption and tend to trap a relatively higher incoming solar radiation. They also possess a higher heat storage capacity that allows them to retain heat during the day and then slowly release it back into the atmosphere as the sun goes down. This phenomenon is known as the Urban Heat Island (UHI) effect and causes an increase in the urban air temperature. Many researchers believe that albedo is the key pavement affecting the urban heat island. However, this research has shown that the problem is more complex and that solar reflectivity may not be the only important factor to evaluate the ability of a pavement to mitigate UHI. The main objective of this study was to analyze and research the influence of pavement materials on the near surface air temperature. In order to accomplish this effort, test sections consisting of Hot Mix Asphalt (HMA), Porous Hot Mix asphalt (PHMA), Portland Cement Concrete (PCC), Pervious Portland Cement Concrete (PPCC), artificial turf, and landscape gravels were constructed in the Phoenix, Arizona area. Air temperature, albedo, wind speed, solar radiation, and wind direction were recorded, analyzed and compared above each pavement material type. The results showed that there was no significant difference in the air temperature at 3-feet and above, regardless of the type of the pavement. Near surface pavement temperatures were also measured and modeled. The results indicated that for the UHI analysis, it is important to consider the interaction between pavement structure, material properties, and environmental factors. Overall, this study demonstrated the complexity of evaluating pavement structures for UHI mitigation; it provided great insight on the effects of material types and properties on surface temperatures and near surface air temperature.

ContributorsPourshams-Manzouri, Tina (Author) / Kaloush, Kamil (Thesis advisor) / Wang, Zhihua (Thesis advisor) / Zapata, Claudia E. (Committee member) / Mamlouk, Michael (Committee member) / Arizona State University (Publisher)
Created2013
152196-Thumbnail Image.png
Description
Objectives: Although childhood obesity has received growing attention, parents still fail to recognize overweight and obesity in their children. Accurate identification of overweight or obesity in their child is associated with the parent's responsiveness to interventions aimed at preventing weight-related health issues. Recent research shows that a child's age and

Objectives: Although childhood obesity has received growing attention, parents still fail to recognize overweight and obesity in their children. Accurate identification of overweight or obesity in their child is associated with the parent's responsiveness to interventions aimed at preventing weight-related health issues. Recent research shows that a child's age and gender are associated with parental misperception of their child's weight status, but little is known about the interaction of these factors across various age groups. This study examined the association between a wide range of parent, child, and household factors and the accuracy of parental perception of their child's body weight status compared to parent-measured body weight status. Methods: Data were collected from a random-digit-dial telephone survey of 1708 households located in five low-income New Jersey cities with large minority populations. A subset of 548 children whose parents completed the survey and returned a worksheet of parent-measured heights and weights were the focus of the analysis. Bivariate and multivariate analyses were performed to determine the factors significantly associated with parental perception of their child's body weight status. Results: Based on parent-measure heights and weights, 36% of the children were overweight or obese (OWOB). Only 21% of OWOB children were perceived by their parents as OWOB. Child gender, child body mass index (BMI) and parent BMI were significant independent predictors of parents' accuracy at perceiving their child's body weight status. Conclusion: Boys, OWOB children, and children of OWOB parents had significantly greater odds of parental underestimation of their body weight status. Parents had better recognition of OWOB in their daughters, especially older daughters, than in their sons, suggesting parental gender bias in identifying OWOB in children. Further research is needed regarding parental gender bias and its implications in OWOB identification in children.
ContributorsBader, Wendy (Author) / Ohri-Vachaspati, Punam (Thesis advisor) / Lloyd, Kristen (Committee member) / Crespo, Noe (Committee member) / Arizona State University (Publisher)
Created2013
152207-Thumbnail Image.png
Description
Current policies subsidizing or accelerating deployment of photovoltaics (PV) are typically motivated by claims of environmental benefit, such as the reduction of CO2 emissions generated by the fossil-fuel fired power plants that PV is intended to displace. Existing practice is to assess these environmental benefits on a net life-cycle basis,

Current policies subsidizing or accelerating deployment of photovoltaics (PV) are typically motivated by claims of environmental benefit, such as the reduction of CO2 emissions generated by the fossil-fuel fired power plants that PV is intended to displace. Existing practice is to assess these environmental benefits on a net life-cycle basis, where CO2 benefits occurring during use of the PV panels is found to exceed emissions generated during the PV manufacturing phase including materials extraction and manufacture of the PV panels prior to installation. However, this approach neglects to recognize that the environmental costs of CO2 release during manufacture are incurred early, while environmental benefits accrue later. Thus, where specific policy targets suggest meeting CO2 reduction targets established by a certain date, rapid PV deployment may have counter-intuitive, albeit temporary, undesired consequences. Thus, on a cumulative radiative forcing (CRF) basis, the environmental improvements attributable to PV might be realized much later than is currently understood. This phenomenon is particularly acute when PV manufacture occurs in areas using CO2 intensive energy sources (e.g., coal), but deployment occurs in areas with less CO2 intensive electricity sources (e.g., hydro). This thesis builds a dynamic Cumulative Radiative Forcing (CRF) model to examine the inter-temporal warming impacts of PV deployments in three locations: California, Wyoming and Arizona. The model includes the following factors that impact CRF: PV deployment rate, choice of PV technology, pace of PV technology improvements, and CO2 intensity in the electricity mix at manufacturing and deployment locations. Wyoming and California show the highest and lowest CRF benefits as they have the most and least CO2 intensive grids, respectively. CRF payback times are longer than CO2 payback times in all cases. Thin film, CdTe PV technologies have the lowest manufacturing CO2 emissions and therefore the shortest CRF payback times. This model can inform policies intended to fulfill time-sensitive CO2 mitigation goals while minimizing short term radiative forcing.
ContributorsTriplican Ravikumar, Dwarakanath (Author) / Seager, Thomas P (Thesis advisor) / Fraser, Matthew P (Thesis advisor) / Chester, Mikhail V (Committee member) / Sinha, Parikhit (Committee member) / Arizona State University (Publisher)
Created2013
152148-Thumbnail Image.png
Description
Globally, more than 350 000 women die annually from complications during pregnancy and childbirth (UNFPA, 2011). Nearly 99% of these, according to World Health Organization (WHO) trends (2010) occur in the developing world outside of a hospital setting with limited resources including emergency care (WHO, 2012; UNFPA, 2011). The most

Globally, more than 350 000 women die annually from complications during pregnancy and childbirth (UNFPA, 2011). Nearly 99% of these, according to World Health Organization (WHO) trends (2010) occur in the developing world outside of a hospital setting with limited resources including emergency care (WHO, 2012; UNFPA, 2011). The most prevalent cause of death is postpartum hemorrhage (PPH), accounting for 25% of deaths according to WHO statistics (2012). Conditions in Afghanistan are reflective of the scope and magnitude of the problem. In Afghanistan, maternal mortality is thought to be among the highest in the world. The Afghan Mortality Survey (AMS) data implies that one Afghan woman dies about every 2 hours from pregnancy-related causes (AMS, 2010). Lack of empowerment, education and access to health care resources increase a woman's risk of dying during pregnancy (AMS, 2010). This project aims to investigate the prospects of scaling-up the correct use of misoprostol, a prostaglandin E1 analogue, to treat PPH in developing countries where skilled assistance and resources are scant. As there has been little published on the lessons learned from programs already in place, this study is experience-driven, based on the knowledge of industry experts. This study employs a concurrent triangulation approach to synthesize quantitative data obtained from previous studies with qualitative information gathered through the testimonies of key personnel who participated in pilot programs involving misoprostol. There are many obstacles to scaling-up training initiatives in Afghanistan and other low-resource areas. The analysis concludes that the most crucial factors for scaling-up community-based programs include: more studies analyzing lessons learns from community driven approaches; stronger partnerships with community health care workers; overcoming barriers like association with abortion, misuse and product issues; and a heightened global and community awareness of the severity of PPH without treatment. These results have implications for those who actively work in Afghanistan to promote maternal health and other countries that may use Afghanistan's work as a blueprint for reducing maternal mortality through community-based approaches. Keywords: Afghanistan, community-based interventions, community-driven, maternal mortality, MDG5, misoprostol, postpartum hemorrhage, reproduction, scale-up
ContributorsCristy, Candice (Author) / Grossman, Gary (Thesis advisor) / Parmentier, Mary-Jane (Committee member) / Byrd, Denise (Committee member) / Arizona State University (Publisher)
Created2013
152084-Thumbnail Image.png
Description
This research presents an analysis of the main institutions and economic incentives that drive farmers behaviors on water use in the Chancay-Lambayeque basin, located in Lambayeque (Peru), a semi arid area of great agricultural importance. I focus my research on identifying the underlying causes of non-collaborative behaviors in regard to

This research presents an analysis of the main institutions and economic incentives that drive farmers behaviors on water use in the Chancay-Lambayeque basin, located in Lambayeque (Peru), a semi arid area of great agricultural importance. I focus my research on identifying the underlying causes of non-collaborative behaviors in regard to water appropriation and infrastructure provisioning decision that generates violent conflicts between users. Since there is not an agreed and concrete criteria to assess "sustainability" I used economic efficiency as my evaluative criteria because, even though this is not a sufficient condition to achieve sustainability it is a necessary one, and thus achieving economic efficiency is moving towards sustainable outcomes. Water management in the basin is far from being economic efficient which means that there is some room for improving social welfare. Previous studies of the region have successfully described the symptoms of this problem; however, they did not focus their study on identifying the causes of the problem. In this study, I describe and analyze how different rules and norms (institutions) define farmers behaviors related to water use. For this, I use the Institutional Analysis and Development framework and a dynamic game theory model to analyze how biophysical attributes, community attributes and rules of the system combined with other factors, can affect farmers actions in regard to water use and affect the sustainability of water resources. Results show that water rights are the factor that is fundamental to the problem. Then, I present an outline for policy recommendation, which includes a revision of water rights and related rules and policies that could increase the social benefits with the use of compensation mechanisms to reach economic efficiency. Results also show that commonly proposed solutions, as switch to less water intensive and more added value crops, improvement in the agronomic and entrepreneurial knowledge, or increases in water tariffs, can mitigate or exacerbate the loss of benefits that come from the poor incentives in the system; but they do not change the nature of the outcome.
ContributorsRubinos, Cathy (Author) / Eakin, Hallie (Committee member) / Abbot, Joshua K (Committee member) / York, Abigail (Committee member) / Arizona State University (Publisher)
Created2013
152109-Thumbnail Image.png
Description
During the months from June to November 2012, the city of Bangalore was faced with a serious solid waste management (SWM) crisis. In the wake of the upheaval, the state court declared source segregation to be mandatory. Yet, while the legislation was clear, the pathway towards a course of action

During the months from June to November 2012, the city of Bangalore was faced with a serious solid waste management (SWM) crisis. In the wake of the upheaval, the state court declared source segregation to be mandatory. Yet, while the legislation was clear, the pathway towards a course of action for the transition was not clear and hence, Bangalore was stuck in a state of limbo. The objectives for this thesis spiraled organically from this crisis. The first objective was to examine the gaps in Bangalore's transition to a more sustainable SWM system. Six particular gaps were identified, which in essence, were opportunities to re-shape the system. The gaps identified included: conflicting political agendas, the exclusion of some key actors, and lack of adequate attention to cultural aspects, provision of appropriate incentives, protection of livelihoods and promotion of innovation. Opportunities were found in better incentivization of sustainable SWM goals, protecting livelihoods that depend on waste, enhancing innovation and endorsing local, context based SWM solutions. Building on this understanding of gaps, the second objective was to explore an innovative, local, bottom-up waste-management model called the Vellore Zero Waste Model, and assess its applicability to Bangalore. The adaptability of the model depended on several factors such as, willingness of actors to redefine their roles and change functions, ability of the municipality to assure quality and oversight, willingness of citizen to source segregate, and most importantly, the political will and collective action needed to ensure and sustain the transition. The role of communication as a vital component to facilitate productive stakeholder engagement and to promote role change was evident. Therefore, the third objective of the study was to explore how interpersonal competencies and communication strategies could be used as a tool to facilitate stakeholder engagement and encourage collective action. In addressing these objectives, India was compared with Austria because Austria is often cited as having some of the best SWM practices in the world and has high recycling rates to show for its reputation.
ContributorsRengarajan, Nivedita (Author) / Aggarwal, Rimjhim (Thesis advisor) / Chhetri, Nalini (Committee member) / Manuel-Navarrete, David (Committee member) / Arizona State University (Publisher)
Created2013
151895-Thumbnail Image.png
Description
Since its launch by the US Green Building Council (USGBC), Leadership in Energy and Environmental Design (LEED) certification has been postured as the "gold standard" for environmentally conscious, sustainable building design, construction and operations. However, as a "living measurement", one which requires ongoing evaluation and reporting of attainment and compliance

Since its launch by the US Green Building Council (USGBC), Leadership in Energy and Environmental Design (LEED) certification has been postured as the "gold standard" for environmentally conscious, sustainable building design, construction and operations. However, as a "living measurement", one which requires ongoing evaluation and reporting of attainment and compliance with LEED certification requirements, there is none. Once awarded, LEED certification does not have a required reporting component to effectively track continued adherence to LEED standards. In addition, there is no expiry tied to the certification; once obtained, a LEED certification rating is presumed to be a valid representation of project certification status. Therefore, LEED lacks a requirement to demonstrate environmental impact of construction materials and building systems over the entire life of the project. Consequently, LEED certification is merely a label rather than a true representation of ongoing adherence to program performance requirements over time. Without continued monitoring and reporting of building design and construction features, and in the absence of recertification requirements, LEED is, in reality, a gold star rather than a gold standard. This thesis examines the lack of required ongoing monitoring, reporting, or recertification requirements following the award by the USGBC of LEED certification; compares LEED with other international programs which do have ongoing reporting or recertification requirements; demonstrates the need and benefit of ongoing reporting or recertification requirements; and explores possible methods for implementation of mandatory reporting requirements within the program.
ContributorsCarpenter, Anne Therese (Author) / Olson, Larry (Thesis advisor) / Hild, Nicholas (Committee member) / Brown, Albert (Committee member) / Arizona State University (Publisher)
Created2013
151919-Thumbnail Image.png
Description
In the past three decades alone, the United States has witnessed a dramatic rise in the prevalence of obesity and overweight in adults and children. Efforts towards obesity mitigation and prevention have produced promising recommendations and researchers and practitioners alike acknowledge that real solutions must match the complexity of the

In the past three decades alone, the United States has witnessed a dramatic rise in the prevalence of obesity and overweight in adults and children. Efforts towards obesity mitigation and prevention have produced promising recommendations and researchers and practitioners alike acknowledge that real solutions must match the complexity of the problem. Comprehensive approaches that target environmental, economic, socio-cultural, and knowledge-based factors that influence diet and physical activity are highly recommended. However, the literature yields little in the way of what such comprehensive obesity interventions actually entail and how they ought to be developed. In particular, there are knowledge gaps in how various stakeholder groups can bridge institutional barriers to collaborate in ways that maximize resources, build upon synergies, and avoid duplication of efforts; and how specific recommendations are actually implemented. This thesis aims to contribute to an emerging body of literature that fills this gap by presenting a practical case study on how to create a playground obesity intervention in the Gateway District of Phoenix, Arizona, in collaboration with researchers, health professionals, neighborhood residents, and city officials. The objectives were two-fold: 1. To outline concrete steps that will allow an organization to create a playground linked with healthy kids education program that aims to increase physical activity, perceptions of safety, and community cohesion; 2. To outline how diverse stakeholders can collaborate effectively to create such a cohesive, complex obesity intervention. A detailed, actionable intervention manual was drafted through semi-structured interviews, literature review, a survey, a stakeholder workshop, and an extended peer-review. The manual describes the sequence of actions necessary for creating an innovative playground that reinforces learning, encourages creative play, and increases physical activity. The sequence of actions was linked with existing local assets, stakeholder roles and responsibilities, costs, and potential barriers. This manual, as well as the process itself, can serve as a transferable model for helping organizations come together to build the capacity required in order to tackle complex health challenges.
ContributorsXiong, Angela (Author) / Wiek, Arnim (Thesis advisor) / Golub, Aaron (Committee member) / Otu, Essen (Committee member) / Arizona State University (Publisher)
Created2013
151922-Thumbnail Image.png
Description
Residential energy consumption accounts for 22% of the total energy use in the United States. The consumer's perception of energy usage and conservation are very inaccurate which is leading to growing number of individuals who try to seek out ways to use energy more wisely. Hence behavioral change in consumers

Residential energy consumption accounts for 22% of the total energy use in the United States. The consumer's perception of energy usage and conservation are very inaccurate which is leading to growing number of individuals who try to seek out ways to use energy more wisely. Hence behavioral change in consumers with respect to energy use, by providing energy use feedback may be important in reducing home energy consumption. Real-time energy information feedback delivered via technology along with feedback interventions has been reported to produce up to 20 percent declines in residential energy consumption through past research and pilot studies. There are, however, large differences in the estimates of the effect of these different types of feedback on energy use. As part of the Energize Phoenix Program, (a U.S. Department of Energy funded program), a Dashboard Study was conducted by the Arizona State University to estimate the impact of real-time, home-energy displays in conjunction with other feedback interventions on the residential rate of energy consumption in Phoenix, while also creating awareness and encouragement to households to reduce energy consumption. The research evaluates the effectiveness of these feedback initiatives. In the following six months of field experiment, a selected number of low-income multi-family apartments in Phoenix, were divided in three groups of feedback interventions, where one group received residential energy use related education and information, the second group received the same education as well as was equipped with the in-home feedback device and the third was given the same education, the feedback device and added budgeting information. Results of the experiment at the end of the six months did not lend a consistent support to the results from literature and past pilot studies. The data revealed a statistically insignificant reduction in energy consumption for the experiment group overall and inconsistent results for individual households when compared to a randomly selected control sample. However, as per the participant survey results, the study proved effective to foster awareness among participating residents of their own patterns of residential electricity consumption and understanding of residential energy use related savings.
ContributorsRungta, Shaily (Author) / Bryan, Harvey (Thesis advisor) / Reddy, Agami (Committee member) / Webster, Aleksasha (Committee member) / Arizona State University (Publisher)
Created2013