Matching Items (16)
Filtering by
- All Subjects: Sustainability
- Genre: Academic theses
- Creators: Cloutier, Scott
- Creators: Bryan, Harvey
Description
Through manipulation of adaptable opportunities available within a given environment, individuals become active participants in managing personal comfort requirements, by exercising control over their comfort without the assistance of mechanical heating and cooling systems. Similarly, continuous manipulation of a building skin's form, insulation, porosity, and transmissivity qualities exerts control over the energy exchanged between indoor and outdoor environments. This research uses four adaptive response variables in a modified software algorithm to explore an adaptive building skin's potential in reacting to environmental stimuli with the purpose of minimizing energy use without sacrificing occupant comfort. Results illustrate that significant energy savings can be realized with adaptive envelopes over static building envelopes even under extreme summer and winter climate conditions; that the magnitude of these savings are dependent on climate and orientation; and that occupant thermal comfort can be improved consistently over comfort levels achieved by optimized static building envelopes. The resulting adaptive envelope's unique climate-specific behavior could inform designers in creating an intelligent kinetic aesthetic that helps facilitate adaptability and resiliency in architecture.
ContributorsErickson, James (Author) / Bryan, Harvey (Thesis advisor) / Addison, Marlin (Committee member) / Kroelinger, Michael D. (Committee member) / Reddy, T. Agami (Committee member) / Arizona State University (Publisher)
Created2013
Description
Residential energy consumption accounts for 22% of the total energy use in the United States. The consumer's perception of energy usage and conservation are very inaccurate which is leading to growing number of individuals who try to seek out ways to use energy more wisely. Hence behavioral change in consumers with respect to energy use, by providing energy use feedback may be important in reducing home energy consumption. Real-time energy information feedback delivered via technology along with feedback interventions has been reported to produce up to 20 percent declines in residential energy consumption through past research and pilot studies. There are, however, large differences in the estimates of the effect of these different types of feedback on energy use. As part of the Energize Phoenix Program, (a U.S. Department of Energy funded program), a Dashboard Study was conducted by the Arizona State University to estimate the impact of real-time, home-energy displays in conjunction with other feedback interventions on the residential rate of energy consumption in Phoenix, while also creating awareness and encouragement to households to reduce energy consumption. The research evaluates the effectiveness of these feedback initiatives. In the following six months of field experiment, a selected number of low-income multi-family apartments in Phoenix, were divided in three groups of feedback interventions, where one group received residential energy use related education and information, the second group received the same education as well as was equipped with the in-home feedback device and the third was given the same education, the feedback device and added budgeting information. Results of the experiment at the end of the six months did not lend a consistent support to the results from literature and past pilot studies. The data revealed a statistically insignificant reduction in energy consumption for the experiment group overall and inconsistent results for individual households when compared to a randomly selected control sample. However, as per the participant survey results, the study proved effective to foster awareness among participating residents of their own patterns of residential electricity consumption and understanding of residential energy use related savings.
ContributorsRungta, Shaily (Author) / Bryan, Harvey (Thesis advisor) / Reddy, Agami (Committee member) / Webster, Aleksasha (Committee member) / Arizona State University (Publisher)
Created2013
Description
The need for alternative energy efficient building heating and cooling technologies has given rise to the development and widespread use of Ground Coupled Heat Pump (GCHP) systems. This dissertation looks at the feasibility of using GCHP systems as a viable economic alternative to traditional air source cooling systems (ASHP) for conditioning buildings in the hot, semi-arid climate of Phoenix, Arizona. Despite high initial costs, GCHPs are gaining a foothold in northern climates where heating dominates, in large part due to government incentives. However, due to issues associated with low ground heat exchanger (GHE) efficiency and thermally-induced soil deformations, GCHPs are typically not considered a viable option in hot climates with deep groundwater and low permeability soil. To evaluate the energy performance and technical feasibility of GCHPs in Phoenix, the DOE 5,500 sq.ft small office, commercial building prototype was simulated in EnergyPlus to determine the cooling and heating loads. Next, a commercial software program, Ground Loop Design (GLD), was used to design and simulate the annual energy performance of both vertical (V-GCHPs) and horizontal GCHPs (H-GCHPs). Life cycle costs (LCC) were evaluated using realistic market costs both under dry, as well as fully saturated soil conditions (meant as an upper performance limit achievable by ground modification techniques). This analysis included performing several sensitivity analyses and also investigating the effect of financial rebates. The range of annual energy savings from the GCHP system for space cooling and heating was around 38-40% compared to ASHPs for dry soil. Saturated soil condition significantly affects the length of the GHE. For V-GCHPs, there was about 26% decrease in the length of GHE, thereby reducing the initial cost by 18-19% and decreasing the payback period by 24-25%. Likewise, for H-GCHPs, the length of GHE was reduced by 25% resulting in 22% and 39-42 % reduction in the initial cost and payback period respectively. With federal incentives, H-GCHPs under saturated soil conditions have the least LCC and a good payback periods of 2.3-4.7 years. V-GCHPs systems were been found to have payback periods of over 25 years, making them unfeasible for Phoenix, AZ, for the type of building investigated.
ContributorsTambe, Vaibhavi Parmanand (Author) / Reddy, T Agami (Thesis advisor) / Kavanzanjian, Edward (Thesis advisor) / Bryan, Harvey (Committee member) / Arizona State University (Publisher)
Created2014
Description
Among the various end-use sectors, the commercial sector is expected to have the second-largest increase in total primary energy consump¬tion from 2009 to 2035 (5.8 quadrillion Btu) with a growth rate of 1.1% per year, it is the fastest growing end-use sectors. In order to make major gains in reducing U.S. building energy use commercial sector buildings must be improved. Energy benchmarking of buildings gives the facility manager or the building owner a quick evaluation of energy use and the potential for energy savings. It is the process of comparing the energy performance of a building to standards and codes, to a set target performance or to a range of energy performance values of similar buildings in order to help assess opportunities for improvement. Commissioning of buildings is the process of ensuring that systems are designed, installed, functionally tested and capable of being operated and maintained according to the owner's operational needs. It is the first stage in the building upgrade process after it has been assessed using benchmarking tools. The staged approach accounts for the interactions among all the energy flows in a building and produces a systematic method for planning upgrades that increase energy savings. This research compares and analyzes selected benchmarking and retrocommissioning tools to validate their accuracy such that they could be used in the initial audit process of a building. The benchmarking study analyzes the Energy Use Intensities (EUIs) and Ratings assigned by Portfolio Manager and Oak Ridge National Laboratory (ORNL) Spreadsheets. The 90.1 Prototype models and Commercial Reference Building model for Large Office building type were used for this comparative analysis. A case-study building from the DOE - funded Energize Phoenix program was also benchmarked for its EUI and rating. The retrocommissioning study was conducted by modeling these prototype models and the case-study building in the Facility Energy Decision System (FEDS) tool to simulate their energy consumption and analyze the retrofits suggested by the tool. The results of the benchmarking study proved that a benchmarking tool could be used as a first step in the audit process, encouraging the building owner to conduct an energy audit and realize the energy savings potential. The retrocommissioning study established the validity of FEDS as an accurate tool to simulate a building for its energy performance using basic inputs and to accurately predict the energy savings achieved by the retrofits recommended on the basis of maximum LCC savings.
ContributorsAgnihotri, Shreya Prabodhkumar (Author) / Reddy, T Agami (Thesis advisor) / Bryan, Harvey (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2011
Description
The Urban Heat Island (UHI) has been known to have been around from as long as people have been urbanizing. The growth and conglomeration of cities in the past century has caused an increase in the intensity and impact of Urban Heat Island, causing significant changes to the micro-climate and causing imbalances in the temperature patterns of cities. The urban heat island (UHI) is a well established phenomenon and it has been attributed to the reduced heating loads and increased cooling loads, impacting the total energy consumption of affected buildings in all climatic regions. This thesis endeavors to understand the impact of the urban heat island on the typical buildings in the Phoenix Metropolitan region through an annual energy simulation process spanning through the years 1950 to 2005. Phoenix, as a representative city for the hot-arid cooling-dominated region, would be an interesting example to see how the reduction in heating energy consumption offsets the increased demand for cooling energy in the building. The commercial reference building models from the Department of Energy have been used to simulate commercial building stock, while for the residential stock a representative residential model prescribing to IECC 2006 standards will be used. The multiyear simulation process will bring forth the energy consumptions of various building typologies, thus highlighting differing impacts on the various building typologies. A vigorous analysis is performed to see the impact on the cooling loads annually, specifically during summer and summer nights, when the impact of the 'atmospheric canopy layer' - urban heat island (UHI) causes an increase in the summer night time minimum and night time average temperatures. This study also shows the disparity in results of annual simulations run utilizing a typical meteorological year (TMY) weather file, to that of the current recorded weather data. The under prediction due to the use of TMY would translate to higher or lower predicted energy savings in the future years, for changes made to the efficiencies of the cooling or heating systems and thermal performance of the built-forms. The change in energy usage patterns caused by higher cooling energy and lesser heating energy consumptions could influence future policies and energy conservation standards. This study could also be utilized to understand the impacts of the equipment sizing protocols currently adopted, equipment use and longevity and fuel swapping as heating cooling ratios change.
ContributorsDoddaballapur, Sandeep (Author) / Bryan, Harvey (Thesis advisor) / Reddy, Agami T (Committee member) / Addison, Marlin (Committee member) / Arizona State University (Publisher)
Created2011
Description
Passive cooling techniques, specifically passive downdraft cooling (PDC), have proven to be a solution that can address issues associated with air conditioning (AC). Globally, over 100 buildings have integrated PDC in its different forms, most of which use direct evaporative cooling. Even though all surveyed buildings were energy efficient and cost-effective and most surveyed buildings were thermally comfortable, application of PDC remains limited. This study aims to advance performance of the single stage passive downdraft evaporative cooling tower (PDECT), and expand its applicability beyond the hot dry conditions where it is typically used, by designing and testing a multi-stage passive and hybrid downdraft cooling tower (PHDCT). Experimental evaluation on half-scale prototypes of these towers was conducted in Tempe, Arizona, during the hot dry and hot humid days of Summer, 2017. Ambient air dry-bulb temperatures ranged between 73.0°F with 82.9 percent coincident relative humidity, and 123.4°F with 7.8 percent coincident relative humidity. Cooling systems in both towers were operated simultaneously to evaluate performance under identical conditions.
Results indicated that the hybrid tower outperformed the single stage tower under all ambient conditions and that towers site water consumption was at least 2 times lower than source water required by electric powered AC. Under hot dry conditions, the single stage tower produced average temperature drops of 35°F (5°F higher than what was reported in the literature), average air velocities of 200 fpm, and average cooling capacities of 4 tons. Furthermore, the hybrid tower produced average temperature drops of 45°F (50°F in certain operation modes), average air velocities of 160 fpm, and average cooling capacities exceeding 4 tons. Under hot humid conditions, temperature drops from the single stage tower were limited to the ambient air wet-bulb temperatures whereas drops continued beyond the wet-bulb in the hybrid tower, resulting in 60 percent decline in the former’s cooling capacity while maintaining the capacity of the latter. The outcomes from this study will act as an incentive for designers to consider incorporating PDC into their designs as a viable replacement/supplement to AC; thus, reducing the impact of the built environment on the natural environment.
Results indicated that the hybrid tower outperformed the single stage tower under all ambient conditions and that towers site water consumption was at least 2 times lower than source water required by electric powered AC. Under hot dry conditions, the single stage tower produced average temperature drops of 35°F (5°F higher than what was reported in the literature), average air velocities of 200 fpm, and average cooling capacities of 4 tons. Furthermore, the hybrid tower produced average temperature drops of 45°F (50°F in certain operation modes), average air velocities of 160 fpm, and average cooling capacities exceeding 4 tons. Under hot humid conditions, temperature drops from the single stage tower were limited to the ambient air wet-bulb temperatures whereas drops continued beyond the wet-bulb in the hybrid tower, resulting in 60 percent decline in the former’s cooling capacity while maintaining the capacity of the latter. The outcomes from this study will act as an incentive for designers to consider incorporating PDC into their designs as a viable replacement/supplement to AC; thus, reducing the impact of the built environment on the natural environment.
ContributorsAl-Hassawi, Omar Dhia Sadulah (Author) / Bryan, Harvey (Thesis advisor) / Reddy, T Agami (Committee member) / Chalfoun, Nader (Committee member) / Arizona State University (Publisher)
Created2017
Description
Institutions of higher learning can be centers of meaning-making and learning and are expected to play a pivotal role in a global shift toward sustainability. Despite recent innovations, much sustainability education today is still delivered using traditional pedagogies common across higher education. Therefore, students and facilitators should continue innovating along pedagogical themes consistent with the goals of sustainability: transformation and emancipation. Yet, more clarity is needed about pedagogical approaches that will transform and emancipate students, allowing them to become innovators that change existing structures and systems. My dissertation attempts to address this need using three approaches. First, I present a framework combining four interacting (i.e., complementary) pedagogies (transmissive, transformative, instrumental, and emancipatory) for sustainability education, helping to reify pedagogical concepts, rebel against outdated curricula, and orient facilitators/learners on their journey toward transformative and emancipatory learning. Second, I use a descriptive case study of a sustainability education course set outside of the traditional higher education context to highlight pedagogical techniques that led to transformative and emancipatory outcomes for learners partaking in the course. Third, I employ the method of autoethnography to explore my own phenomenological experience as a sustainability student and classroom facilitator, helping others to identify the disenchanting paradoxes of sustainability education and integrate the lessons they hold. All three approaches of the dissertation maintain a vision of sustainability education that incorporates contemplative practices as essential methods in a field in need of cultivating hope, resilience, and emergence.
ContributorsPapenfuss, Jason (Author) / Merritt, Eileen (Thesis advisor) / Manuel-Navarrete, David (Thesis advisor) / Eckard, Bonnie (Committee member) / Cloutier, Scott (Committee member) / Arizona State University (Publisher)
Created2019
Description
Positive Youth Development (PYD) programs include intentional efforts by peers, adults, communities, schools, and organizations to provide opportunities for youth to increase their skills, abilities, and interests in positive activities. The goal of PYD is to provide positive outcomes where youth are viewed as resources to be developed rather than problems to be managed. Future generations rely on youth as active contributing members of society and PYD programs promote sustainable futures for young individuals and the community. PYD programs started in the United States and grew out of interest in prevention programs targeting risky behavior of youth.
Interest is growing in expanding PYD programs internationally as they may promote resilient characteristics and sustainable life skills. In particular, and one focus area of this dissertation, interest is growing in rural Asia. However, given the interdisciplinary nature of PYD programs, there are no standard assessment metrics or tools in place. Without standards, comparing PYD programs effectively is impossible. Within this dissertation, in four papers, I 1) develop a universal PYD assessment tool, the Positive Youth Development Sustainability Scale (PYDSS), 2) apply the PYDSS to two PYD programs in rural Thailand as a quantitative analysis, 3) use the categories of the PYDSS as a coding guide for qualitative analysis of two PYD programs in rural Thailand, and 4) assess a PYD program in the Phoenix-metro area that integrates physical activity, academics, and ethics. Results indicate that the PYDSS can be applied to PYD programs in both Thailand and Phoenix and that a mixed methods approach is a suggested form or data collection. My research could lead to the further improvement of current PYD programs and their intervention role, while also promoting universal PYD assessment techniques that support sustainable impacts on youth as a result of program intervention and design.
Interest is growing in expanding PYD programs internationally as they may promote resilient characteristics and sustainable life skills. In particular, and one focus area of this dissertation, interest is growing in rural Asia. However, given the interdisciplinary nature of PYD programs, there are no standard assessment metrics or tools in place. Without standards, comparing PYD programs effectively is impossible. Within this dissertation, in four papers, I 1) develop a universal PYD assessment tool, the Positive Youth Development Sustainability Scale (PYDSS), 2) apply the PYDSS to two PYD programs in rural Thailand as a quantitative analysis, 3) use the categories of the PYDSS as a coding guide for qualitative analysis of two PYD programs in rural Thailand, and 4) assess a PYD program in the Phoenix-metro area that integrates physical activity, academics, and ethics. Results indicate that the PYDSS can be applied to PYD programs in both Thailand and Phoenix and that a mixed methods approach is a suggested form or data collection. My research could lead to the further improvement of current PYD programs and their intervention role, while also promoting universal PYD assessment techniques that support sustainable impacts on youth as a result of program intervention and design.
ContributorsSieng, Michael (Author) / Cloutier, Scott (Thesis advisor) / Dooley, Kevin (Committee member) / Eder, James (Committee member) / Arizona State University (Publisher)
Created2017
Description
The resilience of infrastructure essential to public health, safety, and well-being remains a priority among Federal agencies and institutions. National policies and guidelines enacted by these entities call for a holistic approach to resilience and effectively acknowledge the complex, multi-organizational, and socio-technical integration of critical infrastructure. However, the concept of holism is seldom discussed in literature. As a result, resilience knowledge among disciplines resides in near isolation, inhibiting opportunities for collaboration and offering partial solutions to complex problems. Furthermore, there is limited knowledge about how human resilience and the capacity to develop and comprehend increasing levels of complexity can influence, or be influenced by, the resilience of complex systems like infrastructure. The above gaps are addressed in this thesis by 1) applying an Integral map as a holistic framework for organizing resilience knowledge across disciplines and applications, 2) examining the relationships between human and technical system resilience capacities via four socio-technical processes: sensing, anticipating, adapting, and learning (SAAL), and 3) identifying an ontological framework for anticipating human resilience and adaptive capacity by applying a developmental perspective to the dynamic relationships between humans interacting with infrastructure. The results of applying an Integral heuristic suggest the importance of factors representing the social interior like organizational values and group intentionality may be under appreciated in the resilience literature from a holistic perspective. The analysis indicates that many of the human and technical resilience capacities reviewed are interconnected, interrelated, and interdependent in relation to the SAAL socio-technical processes. This work contributes a socio-technical perspective that incorporates the affective dimension of human resilience. This work presents an ontological approach to critical infrastructure resilience that draws upon the human resilience, human psychological development, and resilience engineering literatures with an integrated model to guide future research. Human mean-making offers a dimensional perspective of resilient socio-technical systems by identifying how and why the SAAL processes change across stages of development. This research suggest that knowledge of resilient human development can improve technical system resilience by aligning roles and responsibilities with the developmental capacities of individuals and groups responsible for the design, operation and management of critical infrastructures.
ContributorsThomas, John E. (Author) / Seager, Thomas P (Thesis advisor) / Clark, Susan (Committee member) / Cloutier, Scott (Committee member) / Fisher, Erik (Committee member) / Arizona State University (Publisher)
Created2017
Description
Producing, transforming, distributing, and consuming food requires a multitude of actors, from the microbes in the soil to the truck drivers, from the salesperson to the bacterial life that supports digestion. Yet, the global food system – far from being neutral – unequally provides and extracts resources around the globe to serve and protect the needs of some, while excluding and/or oppressing others and producing trauma in the process. Drawing on feminist scholarship and permaculture research – two fields that discuss the importance of care but only rarely work together – and using social science methods, I explore how to integrate care into food systems, and what are the outcomes of such an integration. I first bring together the voices of 35 everyday experts from Cuba, France, and the United States (Arizona) and perspectives from ethics of care, creation care, indigenous scholars, and permaculture specialists, and I use grounded theory to develop a definition of care in food systems context, and a conceptual map of care that identifies motives for caring, caring practices and their results. I then discuss how caring practices enhance food systems’ adaptive capacity and resilience. Next, I study the relationship between a subset of the identified caring practices – what is recognized as “Earth care” – and their effect on well-being in general, and Food Well-Being more specifically, using three case studies from Arizona based on: (1) interviews of school teachers, (2) interviews of sustainable farmers, (3) a survey with 96 gardeners. There, I also discuss how policies and cultural transformations can better support the integration of Earth care practices in food systems. Then, I examine how urban food autonomy movements are grassroots examples of integration of care in food systems, and how through their care practices – Earth care, “People care” and “Fair share” – they can serve as a catalyst for social change and contribute to the achievement of the United Nations Sustainable Development Goals. Lastly, I conclude with recommendations to strengthen a culture of care in food systems, as well as limitations to my research, and future research directions.
ContributorsGiraud, Esteve Gaelle (Author) / Aggarwal, Rimjhim (Thesis advisor) / Cloutier, Scott (Thesis advisor) / Samuelson, Hava (Committee member) / Chhetri, Netra (Committee member) / Arizona State University (Publisher)
Created2022