Filtering by
- All Subjects: Sustainability
- Genre: Academic theses
- Creators: Klinsky, Sonja
- Creators: Kaloush, Kamil
- Member of: Theses and Dissertations
In recent years, an increase of environmental temperature in urban areas has raised many concerns. These areas are subjected to higher temperature compared to the rural surrounding areas. Modification of land surface and the use of materials such as concrete and/or asphalt are the main factors influencing the surface energy balance and therefore the environmental temperature in the urban areas. Engineered materials have relatively higher solar energy absorption and tend to trap a relatively higher incoming solar radiation. They also possess a higher heat storage capacity that allows them to retain heat during the day and then slowly release it back into the atmosphere as the sun goes down. This phenomenon is known as the Urban Heat Island (UHI) effect and causes an increase in the urban air temperature. Many researchers believe that albedo is the key pavement affecting the urban heat island. However, this research has shown that the problem is more complex and that solar reflectivity may not be the only important factor to evaluate the ability of a pavement to mitigate UHI. The main objective of this study was to analyze and research the influence of pavement materials on the near surface air temperature. In order to accomplish this effort, test sections consisting of Hot Mix Asphalt (HMA), Porous Hot Mix asphalt (PHMA), Portland Cement Concrete (PCC), Pervious Portland Cement Concrete (PPCC), artificial turf, and landscape gravels were constructed in the Phoenix, Arizona area. Air temperature, albedo, wind speed, solar radiation, and wind direction were recorded, analyzed and compared above each pavement material type. The results showed that there was no significant difference in the air temperature at 3-feet and above, regardless of the type of the pavement. Near surface pavement temperatures were also measured and modeled. The results indicated that for the UHI analysis, it is important to consider the interaction between pavement structure, material properties, and environmental factors. Overall, this study demonstrated the complexity of evaluating pavement structures for UHI mitigation; it provided great insight on the effects of material types and properties on surface temperatures and near surface air temperature.
1) What do American students know and believe about climate change? How is knowledge related to beliefs?
2) What types of behaviors are students exhibiting that may affect climate change? How do beliefs relate to behavioral choices?
3) Do climate change knowledge, beliefs, and behaviors vary between geographic locations in the United States?
The results of this study begin to highlight the differences between knowledge, beliefs, and behaviors around the United States. First, results showed that students have heard of climate change but often confused aspects of the problem, and they tended to focus on causes and impacts, as opposed to solutions. Related to beliefs, students tended to believe that climate change is caused by both humans and natural trends, and would affect plant and animal species more than themselves and their families. Second, students were most likely to participate in individual behaviors such as turning off lights and electronics, and least likely to take public transportation and eat a vegetarian meal. Individual behaviors seem to be most relevant to this age group, in contrast to policy solutions. Third, students in Illinois felt they would be more likely to experience colder temperatures and more precipitation than those in Arizona, where students were more concerned about rising temperatures.
Understanding behaviors, motivations behind beliefs and choices, and barriers to actions can support pro-environmental behavior change. Educational strategies can be employed to more effectively account for the influences on a young person's belief formation and behavior choices. Providing engagement opportunities with location-specific solutions that are more feasible for youth to participate in on their own could also support efforts for behavior change.
the past half century due to demographic changes. The increase in meat is visible in Mexico as well due to expanding economic interest in cattle production plus increased population and rising incomes. The worst consequences of our modern food system are in factory farming of animals, which requires a greater amount of resources than for producing grains, fruits, and vegetables. The specific effects of meat consumption highlight the importance of understanding humans as actors in the food system. In order to explore the drivers of consumer food and meat choice, my research answered the two questions: What factors influence meat consumption? and How do cultural and social norms influence decisions to consume certain types and amounts of meat?
Qualitative interviews were conducted with Mexican-American respondents between age 20 and 29 as the population of interest because of their regional dominance in the study area of Tempe, AZ and because of the high prevalence of meat in their cultural diets. Looking at millennials in particular is crucial because as the first generation born with technology and Internet as constants, they have formed unique characteristics like openness to change and new perspectives. My sample population communicated motivations and constraints to their overall consumption patterns and the frequency and types of meat consumed.
This study found that cost and convenience were the driving factors behind food choice, given the hectic schedules of the sample population, who were mostly students at Arizona State University. Culture played an important role in respondents' heavy meat consumption given their exposure to meat's centrality in traditional Mexican meals. Acculturation did not play an extensive role because prominent Mexican culture in the Southwest U.S. allowed respondents' families access to traditional food while living in the US. The lack of sustainability knowledge and its connection to food choice indicates the importance of marketing that contextualizes decreased meat consumption. Rather than focusing solely on environmental outcomes, marketing tools highlighting health, financial, and economic benefits of eating less meat would encourage more consumers to decrease consumption.
The objective of the research is to test the use of 3D printed thermoplastic to produce fixtures which affix instrumentation to asphalt concrete samples used for Simple Performance Testing (SPT). The testing is done as part of materials characterization to obtain properties that will help in future pavement designs. Currently, these fixtures (mounting studs) are made of expensive brass and cumbersome to clean with or without chemicals.
Three types of thermoplastics were utilized to assess the effect of temperature and applied stress on the performance of the 3D printed studs. Asphalt concrete samples fitted with thermoplastic studs were tested according to AASHTO & ASTM standards. The thermoplastics tested are: Polylactic acid (PLA), the most common 3D printing material; Acrylonitrile Butadiene Styrene (ABS), a typical 3D printing material which is less rigid than PLA and has a higher melting temperature; Polycarbonate (PC), a strong, high temperature 3D printing material.
A high traffic volume Marshal mix design from the City of Phoenix was obtained and adapted to a Superpave mix design methodology. The mix design is dense-graded with nominal maximum aggregate size of ¾” inch and a PG 70-10 binder. Samples were fabricated and the following tests were performed: Dynamic Modulus |E*| conducted at five temperatures and six frequencies; Flow Number conducted at a high temperature of 50°C, and axial cyclic fatigue test at a moderate temperature of 18°C.
The results from SPT for each 3D printed material were compared to results using brass mounting studs. Validation or rejection of the concept was determined from statistical analysis on the mean and variance of collected SPT test data.
The concept of using 3D printed thermoplastic for mounting stud fabrication is a promising option; however, the concept should be verified with more extensive research using a variety of asphalt mixes and operators to ensure no bias in the repeatability and reproducibility of test results. The Polycarbonate (PC) had a stronger layer bonding than ABS and PLA while printing. It was recommended for follow up studies.
Six asphalt mixes were prepared with three RAP contents, 0%, 15% and 25%, with and without Organosilane. The mixing temperature was reduced by 10°C and the compaction temperature was reduced by 30°C. Mix designs were performed, and the volumetric properties were compared. The mixture laboratory performance was evaluated for all mixtures by conducting Dynamic Modulus, Flow Number and Tensile Strength Ratio tests.
The study findings showed that mixtures achieved better compaction at a reduced temperature of 30°C. Mixtures modified with Organosilane generally exhibited softer behavior at the extreme ends of lower and higher temperatures. The lower moduli are to reduce the potential for cracking. For the Flow Number test, the RAP mixtures with OS passed the minimum required at all traffic levels. Tensile Strength Ratio results increased with the increase in RAP percentage, and further increase was observed when OS was used. The OS reduced the sticking nature of the binder to the molds and equipment, which reduced the efforts in cleaning them.
Finally, the future use of RAP by the City of Phoenix would positively contributes to their sustainability aspiration and initiatives. The use of Organosilane may even facilitates higher percentage of RAP usage; it definitely improves the moisture resistance of asphalt mixtures, especially when lower mixing and compaction temperatures are desired or used.
The built environment is responsible for a significant portion of global waste generation.
Construction and demolition (C&D) waste requires significant landfill areas and costs
billions of dollars. New business models that reduce this waste may prove to be financially
beneficial and generally more sustainable. One such model is referred to as the “Circular
Economy” (CE), which promotes the efficient use of materials to minimize waste
generation and raw material consumption. CE is achieved by maximizing the life of
materials and components and by reclaiming the typically wasted value at the end of their
life. This thesis identifies the potential opportunities for using CE in the built environment.
It first calculates the magnitude of C&D waste and its main streams, highlights the top
C&D materials based on weight and value using data from various regions, identifies the
top C&D materials’ current recycling and reuse rates, and finally estimates a potential
financial benefit of $3.7 billion from redirecting C&D waste using the CE concept in the
United States.