Matching Items (3)
Filtering by
- All Subjects: fluorescence correlation spectroscopy
- Genre: Doctoral Dissertation
- Creators: Levitus, Marcia
Description
Biophysical techniques have been increasingly applied toward answering biological questions with more precision. Here, three different biological systems were studied with the goal of understanding their dynamic differences, either conformational dynamics within the system or oligomerization dynamics between monomers. With Cy3 on the 5' end of DNA, the effects of changing the terminal base pair were explored using temperature-dependent quantum yields. It was discovered, in combination with simulations, that a terminal thymine base has the weakest stacking interactions with the Cy3 dye compared to the other three bases. With ME1 heterodimers, the goal was to see if engineering a salt bridge at the dimerization interface could allow for control over dimerization in a pH-dependent manner. This was performed experimentally by measuring FRET between monomers containing either a Dap or an Asp mutation and comparing FRET efficiency at different pHs. It was demonstrated that the heterodimeric salt bridge would only form in a pH range near neutrality. Finally, with DNA processivity clamps, one aim was to compare the equilibrium dissociation constants, kinetic rate constants, and lifetimes of the closed rings for beta clamp and PCNA. This was done using a variety of biophysical techniques but with three as the main focus: fluorescence correlation spectroscopy, single-molecule experiments, and time-correlated single photon counting measurements. The stability of beta clamp was found to be three orders of magnitude higher when measuring solution stability but only one order of magnitude higher when measuring intrinsic stability, which is a result of salt bridge interactions in the interface of beta clamp. Ongoing work built upon the findings from this project by attempting to disrupt interface stability of different beta clamp mutants by adding salt or changing the pH of the solution. Lingering questions about the dynamics of different areas of the clamps has led to another project for which we have developed a control to demystify some unexpected similarities between beta clamp mutants. With that project, we show that single-labeled and double-labeled samples have similar autocorrelation decays in florescence correlation spectroscopy, allowing us to rule out the dyes themselves as causing fluctuations in the 10-100 microsecond timescale.
ContributorsBinder, Jennifer (Author) / Levitus, Marcia (Thesis advisor) / Wachter, Rebekka (Committee member) / Ros, Robert (Committee member) / Arizona State University (Publisher)
Created2015
Description
Serial femtosecond crystallography (SFX) with X-ray free electron lasers (XFELs) has enabled the determination of damage-free protein structures at ambient temperatures and of reaction intermediate species with time resolution on the order of hundreds of femtoseconds. However, currently available XFEL facility X-ray pulse structures waste the majority of continuously injected crystal sample, requiring a large quantity (up to grams) of crystal sample to solve a protein structure. Furthermore, mix-and-inject serial crystallography (MISC) at XFEL facilities requires fast mixing for short (millisecond) reaction time points (𝑡"), and current sample delivery methods have complex fabrication and assembly requirements.
To reduce sample consumption during SFX, a 3D printed T-junction for generating segmented aqueous-in-oil droplets was developed. The device surface properties were characterized both with and without a surface coating for improved droplet generation stability. Additionally, the droplet generation frequency was characterized. The 3D printed device interfaced with gas dynamic virtual nozzles (GDVNs) at the Linac Coherent Light Source (LCLS), and a relationship between the aqueous phase volume and the resulting crystal hit rate was developed. Furthermore, at the European XFEL (EuXFEL) a similar quantity and quality of diffraction data was collected for segmented sample delivery using ~60% less sample volume than continuous injection, and a structure of 3-deoxy-D-manno- octulosonate 8-phosphate synthase (KDO8PS) delivered by segmented injection was solved that revealed new structural details to a resolution of 2.8 Ă….
For MISC, a 3D printed hydrodynamic focusing mixer for fast mixing by diffusion was developed to automate device fabrication and simplify device assembly. The mixer was characterized with numerical models and fluorescence microscopy. A variety of devices were developed to reach reaction intermediate time points, 𝑡", on the order of 100 – 103 ms. These devices include 3D printed mixers coupled to glass or 3D printed GDVNs and two designs of mixers with GDVNs integrated into the one device. A 3D printed mixer coupled to a glass GDVN was utilized at LCLS to study the oxidation of cytochrome c oxidase (CcO), and a structure of the CcO Pr intermediate was determined at 𝑡" = 8 s.
To reduce sample consumption during SFX, a 3D printed T-junction for generating segmented aqueous-in-oil droplets was developed. The device surface properties were characterized both with and without a surface coating for improved droplet generation stability. Additionally, the droplet generation frequency was characterized. The 3D printed device interfaced with gas dynamic virtual nozzles (GDVNs) at the Linac Coherent Light Source (LCLS), and a relationship between the aqueous phase volume and the resulting crystal hit rate was developed. Furthermore, at the European XFEL (EuXFEL) a similar quantity and quality of diffraction data was collected for segmented sample delivery using ~60% less sample volume than continuous injection, and a structure of 3-deoxy-D-manno- octulosonate 8-phosphate synthase (KDO8PS) delivered by segmented injection was solved that revealed new structural details to a resolution of 2.8 Ă….
For MISC, a 3D printed hydrodynamic focusing mixer for fast mixing by diffusion was developed to automate device fabrication and simplify device assembly. The mixer was characterized with numerical models and fluorescence microscopy. A variety of devices were developed to reach reaction intermediate time points, 𝑡", on the order of 100 – 103 ms. These devices include 3D printed mixers coupled to glass or 3D printed GDVNs and two designs of mixers with GDVNs integrated into the one device. A 3D printed mixer coupled to a glass GDVN was utilized at LCLS to study the oxidation of cytochrome c oxidase (CcO), and a structure of the CcO Pr intermediate was determined at 𝑡" = 8 s.
ContributorsEchelmeier, Austin (Author) / Ros, Alexandra (Thesis advisor) / Levitus, Marcia (Committee member) / Weierstall, Uwe (Committee member) / Arizona State University (Publisher)
Created2019
Description
The cell is a dense environment composes of proteins, nucleic acids, as well as other small molecules, which are constantly bombarding each other and interacting. These interactions and the diffusive motions are driven by internal thermal fluctuations. Upon collision, molecules can interact and form complexes. It is of interest to learn kinetic parameters such as reaction rates of one molecule converting to different species or two molecules colliding and form a new species as well as to learn diffusion coefficients.
Several experimental measurements can probe diffusion coefficients at the single-molecule and bulk level. The target of this thesis is on single-molecule methods, which can assess diffusion coefficients at the individual molecular level. For instance, super resolution methods like stochastic optical reconstruction microscopy (STORM) and photo activated localization microscopy (PALM), have a high spatial resolution with the cost of lower temporal resolution. Also, there is a different group of methods, such as MINFLUX, multi-detector tracking, which can track a single molecule with high spatio-temporal resolution. The problem with these methods is that they are only applicable to very diluted samples since they need to ensure existence of a single molecule in the region of interest (ROI).
In this thesis, the goal is to have the best of both worlds by achieving high spatio-temporal resolutions without being limited to a few molecules. To do so, one needs to refocus on fluorescence correlation spectroscopy (FCS) as a method that applies to both in vivo and in vitro systems with a high temporal resolution and relies on multiple molecules traversing a confocal volume for an extended period of time. The difficulty here is that the interpretation of the signal leads to different estimates for the kinetic parameters such as diffusion coefficients based on a different number of molecules we consider in the model. It is for this reason that the focus of this thesis is now on using Bayesian nonparametrics (BNPs) as a way to solve this model selection problem and extract kinetic parameters such as diffusion coefficients at the single-molecule level from a few photons, and thus with the highest temporal resolution as possible.
Several experimental measurements can probe diffusion coefficients at the single-molecule and bulk level. The target of this thesis is on single-molecule methods, which can assess diffusion coefficients at the individual molecular level. For instance, super resolution methods like stochastic optical reconstruction microscopy (STORM) and photo activated localization microscopy (PALM), have a high spatial resolution with the cost of lower temporal resolution. Also, there is a different group of methods, such as MINFLUX, multi-detector tracking, which can track a single molecule with high spatio-temporal resolution. The problem with these methods is that they are only applicable to very diluted samples since they need to ensure existence of a single molecule in the region of interest (ROI).
In this thesis, the goal is to have the best of both worlds by achieving high spatio-temporal resolutions without being limited to a few molecules. To do so, one needs to refocus on fluorescence correlation spectroscopy (FCS) as a method that applies to both in vivo and in vitro systems with a high temporal resolution and relies on multiple molecules traversing a confocal volume for an extended period of time. The difficulty here is that the interpretation of the signal leads to different estimates for the kinetic parameters such as diffusion coefficients based on a different number of molecules we consider in the model. It is for this reason that the focus of this thesis is now on using Bayesian nonparametrics (BNPs) as a way to solve this model selection problem and extract kinetic parameters such as diffusion coefficients at the single-molecule level from a few photons, and thus with the highest temporal resolution as possible.
ContributorsJazani, Sina (Author) / Presse, Steve (Thesis advisor) / Matyushov, Dmitry (Committee member) / Levitus, Marcia (Committee member) / Fricks, John (Committee member) / Arizona State University (Publisher)
Created2020