Matching Items (28)
Description
Life cycle assessment (LCA) is a powerful framework for environmental decision making because the broad boundaries called for prevent shifting of burden from one life-cycle phase to another. Numerous experts and policy setting organizations call for the application of LCA to developing nanotechnologies. Early application of LCA to nanotechnology may identify environmentally problematic processes and supply chain components before large investments contribute to technology lock in, and thereby promote integration of environmental concerns into technology development and scale-up (enviro-technical integration). However, application of LCA to nanotechnology is problematic due to limitations in LCA methods (e.g., reliance on data from existing industries at scale, ambiguity regarding proper boundary selection), and because social drivers of technology development and environmental preservation are not identified in LCA. This thesis proposes two methodological advances that augment current capabilities of LCA by incorporating knowledge from technical and social domains. Specifically, this thesis advances the capacity for LCA to yield enviro-technical integration through inclusion of scenario development, thermodynamic modeling, and use-phase performance bounding to overcome the paucity of data describing emerging nanotechnologies. With regard to socio-technical integration, this thesis demonstrates that social values are implicit in LCA, and explores the extent to which these values impact LCA practice and results. There are numerous paths of entry through which social values are contained in LCA, for example functional unit selection, impact category selection, and system boundary definition - decisions which embody particular values and determine LCA results. Explicit identification of how social values are embedded in LCA promotes integration of social and environmental concerns into technology development (socio-enviro-technical integration), and may contribute to the development of socially-responsive and environmentally preferable nanotechnologies. In this way, tailoring LCA to promote socio-enviro-technical integration is a tangible and meaningful step towards responsible innovation processes.
ContributorsWender, Ben A. (Author) / Seager, Thomas P (Thesis advisor) / Crozier, Peter (Committee member) / Fraser, Matthew (Committee member) / Guston, David (Committee member) / Arizona State University (Publisher)
Created2013
Description
Wind measurements are fundamental inputs for the evaluation of potential energy yield and performance of wind farms. Three-dimensional scanning coherent Doppler lidar (CDL) may provide a new basis for wind farm site selection, design, and control. In this research, CDL measurements obtained from multiple wind energy developments are analyzed and a novel wind farm control approach has been modeled. The possibility of using lidar measurements to more fully characterize the wind field is discussed, specifically, terrain effects, spatial variation of winds, power density, and the effect of shear at different layers within the rotor swept area. Various vector retrieval methods have been applied to the lidar data, and results are presented on an elevated terrain-following surface at hub height. The vector retrieval estimates are compared with tower measurements, after interpolation to the appropriate level. CDL data is used to estimate the spatial power density at hub height. Since CDL can measure winds at different vertical levels, an approach for estimating wind power density over the wind turbine rotor-swept area is explored. Sample optimized layouts of wind farm using lidar data and global optimization algorithms, accounting for wake interaction effects, have been explored. An approach to evaluate spatial wind speed and direction estimates from a standard nested Coupled Ocean and Atmosphere Mesoscale Prediction System (COAMPS) model and CDL is presented. The magnitude of spatial difference between observations and simulation for wind energy assessment is researched. Diurnal effects and ramp events as estimated by CDL and COAMPS were inter-compared. Novel wind farm control based on incoming winds and direction input from CDL's is developed. Both yaw and pitch control using scanning CDL for efficient wind farm control is analyzed. The wind farm control optimizes power production and reduces loads on wind turbines for various lidar wind speed and direction inputs, accounting for wind farm wake losses and wind speed evolution. Several wind farm control configurations were developed, for enhanced integrability into the electrical grid. Finally, the value proposition of CDL for a wind farm development, based on uncertainty reduction and return of investment is analyzed.
ContributorsKrishnamurthy, Raghavendra (Author) / Calhoun, Ronald J (Thesis advisor) / Chen, Kangping (Committee member) / Huang, Huei-Ping (Committee member) / Fraser, Matthew (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2013
Description
Life cycle assessment (LCA) is increasingly identified as the proper tool/framework for performing cradle to grave analysis of a product, technology, or supply chain. LCA proceeds by comparing the materials and energy needed for materials extraction, benefaction, and end-of-life management, in addition to the actual lifetime of the product. This type of analysis is commonly used to evaluate forms of renewable energy to ensure that we don't harm the environment in the name of saving it. For instance, LCA for photovoltaic (PV) technologies can be used to evaluate the environmental impacts. CdTe thin film solar cells rely on cadmium and tellurium metals which are produced as by-products in the refining of zinc and copper ore, respectively. In order to understand the environmental burdens of tellurium, it is useful to explore the extraction and refining process of copper. Copper can be refined using either a hydrometallurgical or pyrometallurgical process. I conducted a comparison of these two methods to determine the environmental impacts, the chemical reactions which take place, the energy requirements, and the extraction costs of each. I then looked into the extraction of tellurium from anode slime produced in the pyrometallurgical process and determined the energy requirements. I connected this to the production of CdTe and the power produced from a CdTe module, and analyzed the production cost of CdTe modules under increasing tellurium prices. It was concluded that tellurium production will be limited by increasing hydrometallurgical extraction of copper. Additionally, tellurium scarcity will not provide a physical constraint to CdTe commercial expansion; however it could affect the price reduction goals.
ContributorsMacIsaac, Kirsten Breanne (Author) / Seager, Thomas (Thesis director) / Fraser, Matthew (Committee member) / Wender, Ben (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor)
Created2013-05
Description
Shifting to renewable energy from fossil fuels is not occurring rapidly. Determining where to locate renewable power plants could help expedite development. The project discussed here uses a GIS ranking tool to determine potential locations for solar and wind power plants in Arizona. Criteria include renewable input (irradiance/wind class), topographic slope, and distance from transmission lines. These are ranked and summed to determine areas with the most potential. The resulting outputs show that there is much more potential land for solar development than wind development. Further analysis in this paper will focus solely on solar due to wind's lower potential. Land sensitivity and ownership are used to assess the feasibility of development. There are many groupings of highly ranked land across the state, but the largest stretch of land runs from outside of Marana (south-central Arizona) northwest to about 60 miles west of Wickenburg (central-west). This regions is mainly on BLM, state, and privately owned land. Some of this land is considered sensitive, but non-sensitive areas with high potential are frequent throughout. Renewable potential in other states could be determined using this tool as well. Variables could be weighted or added depending on each area's need.
ContributorsZeck, Kevin Michael (Author) / Fraser, Matthew (Thesis director) / Pasqualetti, Martin (Committee member) / Cowger, Lane (Committee member) / Barrett, The Honors College (Contributor) / School of Geographical Sciences and Urban Planning (Contributor) / School of Sustainability (Contributor)
Created2013-05
Description
-Please adjust the format of the abstract. m-3 should be typed as "m to the minus 3" with the "minus 3" in superscript
-see the additional "abstract.pdf" document for formatting
In arid environments like Phoenix, many professional and residential outdoor spaces are cooled by the use of misting systems. These systems spray a fine mist of water droplets that cool down the surrounding air through the endothermic evaporation process. When the water droplets evaporate, they leave behind dissolved material that is present in the water, generating ambient particulate matter (PM). Thus, misting systems are a point source of PM. Currently there is no information on their impact on air quality in close proximity to these systems, or on the chemical composition of the particulate matter generated by the evaporating mist.
In this project, PM concentrations are found to increase on average by a factor of 8 from ambient levels in the vicinity of a residential misting system in controlled experiments. PM concentrations in public places that use misting systems are also investigated. The PM10 concentrations in public places ranged from 0.102 ± 0.010 mg m-3 to 1.47 ± 0.15 mg m-3, and PM2.5 ranged from 0.095 ± 0.010 mg m-3 to 0.99 ± 0.10 mg m-3. Air quality index (AQI) values based on these concentrations indicate that these levels of PM range from unhealthy to hazardous in most cases. PM concentrations tend to decrease after remaining relatively constant with increasing distance from misting systems. Chemical data reveal that chloride and magnesium ions may be used as tracers of aerosolized water from misting systems. The average chloride concentration was 71 µg m-3 in misting samples and below the detection limit for Cl- (< 8.2 µg m-3) in ambient samples. The average magnesium concentration was 11.7 µg m-3 in misting samples and 0.23 µg m-3 in ambient samples.
-see the additional "abstract.pdf" document for formatting
In arid environments like Phoenix, many professional and residential outdoor spaces are cooled by the use of misting systems. These systems spray a fine mist of water droplets that cool down the surrounding air through the endothermic evaporation process. When the water droplets evaporate, they leave behind dissolved material that is present in the water, generating ambient particulate matter (PM). Thus, misting systems are a point source of PM. Currently there is no information on their impact on air quality in close proximity to these systems, or on the chemical composition of the particulate matter generated by the evaporating mist.
In this project, PM concentrations are found to increase on average by a factor of 8 from ambient levels in the vicinity of a residential misting system in controlled experiments. PM concentrations in public places that use misting systems are also investigated. The PM10 concentrations in public places ranged from 0.102 ± 0.010 mg m-3 to 1.47 ± 0.15 mg m-3, and PM2.5 ranged from 0.095 ± 0.010 mg m-3 to 0.99 ± 0.10 mg m-3. Air quality index (AQI) values based on these concentrations indicate that these levels of PM range from unhealthy to hazardous in most cases. PM concentrations tend to decrease after remaining relatively constant with increasing distance from misting systems. Chemical data reveal that chloride and magnesium ions may be used as tracers of aerosolized water from misting systems. The average chloride concentration was 71 µg m-3 in misting samples and below the detection limit for Cl- (< 8.2 µg m-3) in ambient samples. The average magnesium concentration was 11.7 µg m-3 in misting samples and 0.23 µg m-3 in ambient samples.
ContributorsKnight, William Louis (Co-author) / Knight, William (Co-author) / Herckes, Pierre (Thesis director) / Fraser, Matthew (Committee member) / Hamilton, Kerry (Committee member) / School of Sustainability (Contributor) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
This paper introduces an excel tool created to improve the accuracy of electrical subcontracting prices for solar photovoltaic energy systems while also minimizing the time needed to create these price estimations. The need for improved precision, specifically during the early stages of a project, is examined and the paper also goes into detail about the components and pricing method that are incorporated into the excel tool. Lastly, the results of the price estimation tool are compared to real bids and recommendations are made for improvement to the tool.
ContributorsJohnson, Eric Allen (Author) / Fraser, Matthew (Thesis director) / Hjelmstad, Keith (Committee member) / Hughes, Jeff (Committee member) / Civil, Environmental and Sustainable Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The prevalence and unique properties of airborne nanoparticles have raised concerns regarding their potential adverse health effects. Despite their significance, the understanding of nanoparticle generation, transport, and exposure remains incomplete. This study first aimed to assess nanoparticle exposure in indoor workplace environments, in the semiconductor manufacturing industry. On-site observations during tool preventive maintenance revealed a significant release of particles smaller than 30 nm, which subsequent instrumental analysis confirmed as predominantly composed of transition metals. Although the measured mass concentration levels did not exceed current federal limits, it prompted concerns regarding how well filter-based air sampling methods would capture the particles for exposure assessment and how well common personal protective equipment would protect from exposure. To address these concerns, this study evaluated the capture efficiency of filters and masks. When challenged by aerosolized engineered nanomaterials, common filters used in industrial hygiene sampling exhibited capture efficiencies of over 60%. Filtering Facepiece Respirators, such as the N95 mask, exhibited a capture efficiency of over 98%. In contrast, simple surgical masks showed a capture efficiency of approximately 70%. The experiments showed that face velocity and ambient humidity influence capture performance and mostly identified the critical role of mask and particle surface charge in capturing nanoparticles. Masks with higher surface potential exhibited higher capture efficiency towards nanoparticles. Eliminating their surface charge resulted in a significantly diminished capture efficiency, up to 43%. Finally, this study characterized outdoor nanoparticle concentrations in the Phoenix metropolitan area, revealing typical concentrations on the order of 10^4 #/cm3 consistent with other urban environments. During the North American monsoon season, in dust storms, with elevated number concentrations of large particles, particularly in the size range of 1-10 μm, the number concentration of nanoparticles in the size range of 30-100 nm was substantially lower by approximately 55%. These findings provide valuable insights for future assessments of nanoparticle exposure risks and filter capture mechanisms associated with airborne nanoparticles.
ContributorsZhang, Zhaobo (Author) / Herckes, Pierre (Thesis advisor) / Westerhoff, Paul (Committee member) / Shock, Everett (Committee member) / Fraser, Matthew (Committee member) / Arizona State University (Publisher)
Created2023
Description
Quantifying halogen presence and speciation in particulate matter is crucial given the role atmospheric particulates play in transport and cycling. While some halogens (fluorine and chlorine) are often included in aerosol studies, iodine and bromine have rarely been examined, especially outside of a marine environment. Focus on this environment is, in part, due to the existence of biogenic marine sources for both halogens. However, examining iodine and bromine in an urban environment has the potential to provide key insights into the transport and processing of these species in the atmosphere. As Tempe is set within a desert environment, bromine concentration is expected to be relatively high due to its presence in Earth’s crust, while iodine is expected to exist in higher concentrations near the coast. To detect presence and concentration, ICP-MS analysis was performed on samples taken in Tempe, AZ as well as sites in Bakersfield, CA and Davis, CA, which yielded preliminary results in line with these expectations. A secondary set of samples were taken in Tempe, AZ during dust storms, haboobs, and winter holidays. CIC was used to determine the organic fraction. In doing so, this study aims to identify species present in an urban environment as well as potential transportation pathways.
ContributorsLoera, Lourdes (Author) / Herckes, Pierre (Thesis director) / Richert, Ranko (Committee member) / Fraser, Matthew (Committee member) / Barrett, The Honors College (Contributor) / School of Molecular Sciences (Contributor) / School of Human Evolution & Social Change (Contributor)
Created2023-05
Description
Energy can be harvested from wastewater using microbial fuel cells (MFC). In order to increase power generation, MFCs can be scaled-up. The MFCs are designed with two air cathodes and two anode electrodes. The limiting electrode for power generation is the cathode and in order to maximize power, the cathodes were made out of a C-N-Fe catalyst and a polytetrafluoroethylene binder which had a higher current production at -3.2 mA/cm2 than previous carbon felt cathodes at -0.15 mA/cm2 at a potential of -0.29 V. Commercial microbial fuel cells from Aquacycl were tested for their power production while operating with simulated blackwater achieved an average of 5.67 mW per cell. The small MFC with the C-N-Fe catalyst and one cathode was able to generate 8.7 mW. Imitating the Aquacycl cells, the new MFC was a scaled-up version of the small MFC where the cathode surface area increased from 81 cm2 to 200 cm2. While the MFC was operating with simulated blackwater, the peak power produced was 14.8 mW, more than the smaller MFC, but only increasing in the scaled-up MFC by 1.7 when the surface area of the cathode increased by 2.46. Further long-term application can be done, as well as operating multiple MFCs in series to generate more power and improve the design.
ContributorsRussell, Andrea (Author) / Torres, Cesar (Thesis advisor) / Garcia Segura, Sergio (Committee member) / Fraser, Matthew (Committee member) / Arizona State University (Publisher)
Created2022
Description
ABSTRACT
Tempe, Arizona can experience high atmospheric particulate matter episodes, both in winter and in summer. In summer, such events might be due to dust storms or wildfires, while in the wintertime, domestic wood burning (fireplaces and heating) tends to be a major contributor. In this study, it was investigated that the particulate matter concentrations and composition for select summertime and wintertime events in Tempe, expected to have high concentrations and possibly biomass burning impacts. Summertime concentrations on the selected days were low except for a dust storm event. In the winter events, across the New Year holiday, concentrations were substantial, especially on New Year's morning because of the fireworks, although precipitation impacted the concentrations. Chemical analysis of bulk organic (OC) and elemental (EC) carbon shows a high ratio of OC/EC, indicative of substantial secondary organic aerosol contributions or biomass burning. Investigation of biomass burning specific molecular markers, such as levoglucosan, using gas chromatography mass spectrometry, showed detectable concentrations during wintertime, confirming wood burning as a significant source of atmospheric particulate matter. In summer, levoglucosan was detected but during the times investigated, wood smoke was not a dominant source of particulate matter. Finally, particulate polycyclic aromatic hydrocarbons (PAH) of burning origin were also investigated because of their toxicity. PAH concentrations showed a clear dependence of temperature with lower molecular weighted (LMW) PAHs being less abundant in the summertime in the particulate matter because of their volatility. The use of diagnostic PAH ratios confirmed the importance of combustion sources for the PAH albeit different ones in summer compared to winter events.
ContributorsAbel, Parker Stephen (Author) / Herckes, Pierre (Thesis advisor) / Xu, Jie (Committee member) / Fraser, Matthew (Committee member) / Arizona State University (Publisher)
Created2024