Matching Items (72)
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA

Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system

Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system can be used to diagnose fatal diseases, such as cancer, at an early stage. One proven method, CellCT, accomplishes 3D imaging by rotating a single cell around a fixed axis. However, some existing cell rotating mechanisms require either intricate microfabrication, and some fail to provide a suitable environment for living cells. This thesis develops a microvorterx chamber that allows living cells to be rotated by hydrodynamic alone while facilitating imaging access. In this thesis work, 1) the new chamber design was developed through numerical simulation. Simulations revealed that in order to form a microvortex in the side chamber, the ratio of the chamber opening to the channel width must be smaller than one. After comparing different chamber designs, the trapezoidal side chamber was selected because it demonstrated controllable circulation and met the imaging requirements. Microvortex properties were not sensitive to the chambers with interface angles ranging from 0.32 to 0.64. A similar trend was observed when chamber heights were larger than chamber opening. 2) Micro-particle image velocimetry was used to characterize microvortices and validate simulation results. Agreement between experimentation and simulation confirmed that numerical simulation was an effective method for chamber design. 3) Finally, cell rotation experiments were performed in the trapezoidal side chamber. The experimental results demonstrated cell rotational rates ranging from 12 to 29 rpm for regular cells. With a volumetric flow rate of 0.5 µL/s, an irregular cell rotated at a mean rate of 97 ± 3 rpm. Rotational rates can be changed by altering inlet flow rates.
ContributorsZhang, Wenjie (Author) / Frakes, David (Thesis advisor) / Meldrum, Deirdre (Thesis advisor) / Chao, Shih-hui (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2011
149805-Thumbnail Image.png
Description
Natural history is, and was, dependent upon the collection of specimens. In the nineteenth century, American naturalists and institutions of natural history cultivated and maintained extensive collection networks comprised of numerous collectors that provided objects of natural history for study. Effective networks were collaborative in nature, with naturalists such as

Natural history is, and was, dependent upon the collection of specimens. In the nineteenth century, American naturalists and institutions of natural history cultivated and maintained extensive collection networks comprised of numerous collectors that provided objects of natural history for study. Effective networks were collaborative in nature, with naturalists such as Spencer Baird of the Smithsonian trading their time and expertise for specimens. The incorporation of Darwinian and Neo-Lamarckian evolutionary theory into natural history in the middle of the century led to dramatic changes in the relationship between naturalists and collectors, as naturalists sought to reconcile their observations within the new evolutionary context. This dissertation uses the careers of collectors Robert Kennicott, Frank Stephens, Edward W. Nelson, E.A. Goldman, and Edmund Heller as case studies in order to evaluate how the changes in the theoretical framework of late nineteenth century natural history led to advances in field practice by assessing how naturalists trained their collectors to meet new demands within the field. Research focused on the correspondence between naturalists and collectors, along with the field notes and applicable publications by collectors. I argue that the changes in natural history necessitated naturalists training their collectors in the basics of biogeography - the study of geographic distribution of organisms, and systematics - the study of the diversity of life - leading to a collaborative relationship in which collectors played an active role in the formation of new biological knowledge. The project concludes that the changes in natural history with regard to theory and practice gradually necessitated a more professional cadre of collectors. Collectors became active agents in the formation of biological knowledge, and instrumental in the formation of a truly systematic natural history. As a result, collectors became de facto field naturalists, the forerunners of the field biologists that dominated the practice of natural history in the early and middle twentieth century.
ContributorsLaubacher, Matthew (Author) / Green, Monica (Thesis advisor) / Laubichler, Manfred (Thesis advisor) / Wright, Johnson Kent (Committee member) / Arizona State University (Publisher)
Created2011
152156-Thumbnail Image.png
Description
Once perceived as an unimportant occurrence in living organisms, cell degeneration was reconfigured as an important biological phenomenon in development, aging, health, and diseases in the twentieth century. This dissertation tells a twentieth-century history of scientific investigations on cell degeneration, including cell death and aging. By describing four central developments

Once perceived as an unimportant occurrence in living organisms, cell degeneration was reconfigured as an important biological phenomenon in development, aging, health, and diseases in the twentieth century. This dissertation tells a twentieth-century history of scientific investigations on cell degeneration, including cell death and aging. By describing four central developments in cell degeneration research with the four major chapters, I trace the emergence of the degenerating cell as a scientific object, describe the generations of a variety of concepts, interpretations and usages associated with cell death and aging, and analyze the transforming influences of the rising cell degeneration research. Particularly, the four chapters show how the changing scientific practices about cellular life in embryology, cell culture, aging research, and molecular biology of Caenorhabditis elegans shaped the interpretations about cell degeneration in the twentieth-century as life-shaping, limit-setting, complex, yet regulated. These events created and consolidated important concepts in life sciences such as programmed cell death, the Hayflick limit, apoptosis, and death genes. These cases also transformed the material and epistemic practices about the end of cellular life subsequently and led to the formations of new research communities. The four cases together show the ways cell degeneration became a shared subject between molecular cell biology, developmental biology, gerontology, oncology, and pathology of degenerative diseases. These practices and perspectives created a special kind of interconnectivity between different fields and led to a level of interdisciplinarity within cell degeneration research by the early 1990s.
ContributorsJiang, Lijing (Author) / Maienschein, Jane (Thesis advisor) / Laubichler, Manfred (Thesis advisor) / Hurlbut, James (Committee member) / Creath, Richard (Committee member) / White, Michael (Committee member) / Arizona State University (Publisher)
Created2013
Description
Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use

Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use them for developing software for laboratory automation systems. This thesis proposes an architecture that is based on existing software architectural paradigms and is specifically tailored to developing software for a laboratory automation system. The architecture is based on fairly autonomous software components that can be distributed across multiple computers. The components in the architecture make use of asynchronous communication methodologies that are facilitated by passing messages between one another. The architecture can be used to develop software that is distributed, responsive and thread-safe. The thesis also proposes a framework that has been developed to implement the ideas proposed by the architecture. The framework is used to develop software that is scalable, distributed, responsive and thread-safe. The framework currently has components to control very commonly used laboratory automation devices such as mechanical stages, cameras, and also to do common laboratory automation functionalities such as imaging.
ContributorsKuppuswamy, Venkataramanan (Author) / Meldrum, Deirdre (Thesis advisor) / Collofello, James (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Johnson, Roger (Committee member) / Arizona State University (Publisher)
Created2012
150916-Thumbnail Image.png
Description
Gene-centric theories of evolution by natural selection have been popularized and remain generally accepted in both scientific and public paradigms. While gene-centrism is certainly parsimonious, its explanations fall short of describing two patterns of evolutionary and social phenomena: the evolution of sex and the evolution of social altruism. I review

Gene-centric theories of evolution by natural selection have been popularized and remain generally accepted in both scientific and public paradigms. While gene-centrism is certainly parsimonious, its explanations fall short of describing two patterns of evolutionary and social phenomena: the evolution of sex and the evolution of social altruism. I review and analyze current theories on the evolution of sex. I then introduce the conflict presented to gene-centric evolution by social phenomena such as altruism and caste sterility in eusocial insects. I review gene-centric models of inclusive fitness and kin selection proposed by Hamilton and Maynard Smith. Based their assumptions, that relatedness should be equal between sterile workers and reproductives, I present several empirical examples that conflict with their models. Following that, I introduce a unique system of genetic caste determination (GCD) observed in hybrid populations of two sister-species of seed harvester ants, Pogonomyrmex rugosus and Pogonomyrmex barbatus. I review the evidence for GCD in those species, followed by a critique of the current gene-centric models used to explain it. In chapter two I present my own theoretical model that is both simple and extricable in nature to explain the origin, evolution, and maintenance of GCD in Pogonomyrmex. Furthermore, I use that model to fill in the gaps left behind by the contributing authors of the other GCD models. As both populations in my study system formed from inter-specific hybridization, I review modern discussions of heterosis (also called hybrid vigor) and use those to help explain the ecological competitiveness of GCD. I empirically address the inbreeding depression the lineages of GCD must overcome in order to remain ecologically stable, demonstrating that as a result of their unique system of caste determination, GCD lineages have elevated recombination frequencies. I summarize and conclude with an argument for why GCD evolved under selective mechanisms which cannot be considered gene-centric, providing evidence that natural selection can effectively operate on non-heritable genotypes appearing in groups and other social contexts.
ContributorsJacobson, Neal (Author) / Gadau, Juergen (Thesis advisor) / Laubichler, Manfred (Committee member) / Pratt, Stephen (Committee member) / Arizona State University (Publisher)
Created2012
151177-Thumbnail Image.png
Description
Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of

Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of single cells. Yet to date, no live-cell compatible version of the technology exists. In this thesis, a microfluidic chip with the ability to rotate live single cells in hydrodynamic microvortices about an axis parallel to the optical focal plane has been demonstrated. The chip utilizes a novel 3D microchamber design arranged beneath a main channel creating flow detachment into the chamber, producing recirculating flow conditions. Single cells are flowed through the main channel, held in the center of the microvortex by an optical trap, and rotated by the forces induced by the recirculating fluid flow. Computational fluid dynamics (CFD) was employed to optimize the geometry of the microchamber. Two methods for the fabrication of the 3D microchamber were devised: anisotropic etching of silicon and backside diffuser photolithography (BDPL). First, the optimization of the silicon etching conditions was demonstrated through design of experiment (DOE). In addition, a non-conventional method of soft-lithography was demonstrated which incorporates the use of two positive molds, one of the main channel and the other of the microchambers, compressed together during replication to produce a single ultra-thin (<200 µm) negative used for device assembly. Second, methods for using thick negative photoresists such as SU-8 with BDPL have been developed which include a new simple and effective method for promoting the adhesion of SU-8 to glass. An assembly method that bonds two individual ultra-thin (<100 µm) replications of the channel and the microfeatures has also been demonstrated. Finally, a pressure driven pumping system with nanoliter per minute flow rate regulation, sub-second response times, and < 3% flow variability has been designed and characterized. The fabrication and assembly of this device is inexpensive and utilizes simple variants of conventional microfluidic fabrication techniques, making it easily accessible to the single cell analysis community.
ContributorsMyers, Jakrey R (Author) / Meldrum, Deirdre (Thesis advisor) / Johnson, Roger (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2012
136524-Thumbnail Image.png
Description
Pressure from fiduciary duty leads agents within organizational systems to make decisions that result in positive feedback loops that often have inimical unintended consequences. The current corporate climate that often puts the bottom line ahead of environmental and social concerns in the name of fiduciary duty is doing so based

Pressure from fiduciary duty leads agents within organizational systems to make decisions that result in positive feedback loops that often have inimical unintended consequences. The current corporate climate that often puts the bottom line ahead of environmental and social concerns in the name of fiduciary duty is doing so based on a revised interpretation of the term that is clearly to the benefit of the corporations. It is important to note that this modern interpretation is a radical misinterpretation of the intent of the law as our forefathers defined it. However, in spite of the fact that the modern interpretation is leading to inimical unintended consequences, providing the systems agents with the proper training and tools necessary to recognize the cost benefit of implementing sustainable solutions may mitigate some of these positive feedback loops and their associated unintended consequences. By developing tools based on sustainable frameworks we may be able to return these organizations to the original intent of fiduciary duty, which was designed to encourage investment in organizations that worked for the public benefit. A concept that is remarkably similar to the triple bottom line framework that many sustainability professionals advocate on behalf of today.
ContributorsJohnson, Lyle Eric (Author) / Laubichler, Manfred (Thesis director) / Dooley, Kevin (Committee member) / O'Neill, Dan (Committee member) / Barrett, The Honors College (Contributor) / W. P. Carey School of Business (Contributor) / School of Sustainability (Contributor)
Created2015-05
136768-Thumbnail Image.png
Description
Influenza has shown its potential to affect and even kill millions of people within an extremely short time frame, yet studies and surveys show that the general public is not well educated about the facts about influenza, including prevention and treatment. For this reason, public perception of influenza is extremely

Influenza has shown its potential to affect and even kill millions of people within an extremely short time frame, yet studies and surveys show that the general public is not well educated about the facts about influenza, including prevention and treatment. For this reason, public perception of influenza is extremely skewed, with people generally not taking the disease as seriously as they should given its severity. To investigate the inconsistencies between action and awareness of best available knowledge regarding influenza, this study conducted literature review and a survey of university students about their knowledge, perceptions, and action taken in relationship to influenza. Due to their dense living quarters, constant daily interactions, and mindset that they are "immune" to fairly common diseases like influenza, university students are a representative sample of urban populations. According to the World Health Organization (WHO), 54% of the world's population lived in cities as of 2014 (Urban population growth). Between 2015 and 2020, the global urban population is expected to grow 1.84% per year, 1.63% between 2020 and 2025, and 1.44% between 2025 and 2030 (Urban population growth). Similar projections estimate that by 2017, an overwhelming majority of the world's population, even in less developed countries, will be living in cities (Urban population growth). Results of this study suggest possible reasons for the large gap between best available knowledge and the perceptions and actions of individuals on the other hand. This may lead to better-oriented influenza education initiatives, more effective prevention and treatment plans, and generally raise excitement and awareness surrounding public health and scientific communication.
ContributorsGur-Arie, Rachel Ellen Haviva (Author) / Maienschein, Jane (Thesis director) / Laubichler, Manfred (Committee member) / Creath, Richard (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor)
Created2014-12
136990-Thumbnail Image.png
Description
This project focuses on the history of how teratogens, or agents which have the potential to cause birth defects, have been understood and tested for teratogenic potential in the US over the twentieth century. Prior to this time, teratogen studies were primarily concerned with cataloguing defects rather than exploring possible

This project focuses on the history of how teratogens, or agents which have the potential to cause birth defects, have been understood and tested for teratogenic potential in the US over the twentieth century. Prior to this time, teratogen studies were primarily concerned with cataloguing defects rather than exploring possible causes. At the turn of the twentieth century, experimental teratogen studies with the aim of elucidating mechanisms commenced. However, these early studies did not aim to discover human pregnancy outcomes and ways to prevent them, but simply focused on the results of exposing pregnant mammals to various physical and chemical insults. My project documents the change in understanding of teratogens over the twentieth century, the advancement of testing methods, and the causes of these advancements. Through the Embryo Project at Arizona State University (embryo.asu.edu), a digital encyclopedia for topics related to embryology, development, and reproductive medicine, I wrote ten encyclopedic articles that focused on chemical mechanisms of various teratogens, testing limitations in animal models, and legal and regulatory responses to well-known teratogens. As an extension of my previous work, this project bridges the current gap in research and focuses on contextualizing major events in the field of teratology to determine how these events led to various shifts in the understanding of birth defects and their causes, and how those conceptual shifts led to the creation of teratological testing guidelines. Results show that throughout the twentieth century, there are four distinct shifts in the understanding of teratogens: the first being 1900-1945, the second being 1946-1960, the third being 1961-1980, and the fourth being 1981-2000.
ContributorsTantibanchachai, Chanapa (Author) / Maienschein, Jane (Thesis director) / Laubichler, Manfred (Committee member) / O'Neil, Erica (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor)
Created2014-05