Matching Items (83)
Description
Molecular dynamics simulations were used to study properties of water at the interface with nanometer-size solutes. We simulated nonpolar attractive Kihara cavities given by a Lennard-Jones potential shifted by a core radius. The dipolar response of the hydration layer to a uniform electric field substantially exceeds that of the bulk. For strongly attractive solutes, the collective dynamics of the hydration layer become slow compared to bulk water, as the solute size is increased. The statistics of electric field fluctuations at the solute center are Gaussian and tend toward the dielectric continuum limit with increasing solute size. A dipolar probe placed at the center of the solute is sensitive neither to the polarity excess nor to the slowed dynamics of the hydration layer. A point dipole was introduced close to the solute-water interface to further study the statistics of electric field fluctuations generated by the water. For small dipole magnitudes, the free energy surface is single-welled, with approximately Gaussian statistics. When the dipole is increased, the free energy surface becomes double-welled, before landing in an excited state, characterized again by a single-welled surface. The intermediate region is fairly broad and is characterized by electrostatic fluctuations significantly in excess of the prediction of linear response. We simulated a solute having the geometry of C180 fullerene, with dipoles introduced on each carbon. For small dipole moments, the solvent response follows the results seen for a single dipole; but for larger dipole magnitudes, the fluctuations of the solute-solvent energy pass through a second maximum. The juxtaposition of the two transitions leads to an approximately cubic scaling of the chemical potential with the dipole strengh. Umbrella sampling techniques were used to generate free energy surfaces of the electric potential fluctuations at the heme iron in Cytochrome B562. The results were unfortunately inconclusive, as the ionic background was not effectively represented in the finite-size system.
ContributorsFriesen, Allan Dwayne (Author) / Matyushov, Dmitry V (Thesis advisor) / Angell, C Austen (Thesis advisor) / Beckstein, Oliver (Committee member) / Mujica, Vladimiro (Committee member) / Arizona State University (Publisher)
Created2012
Description
The addition of aminoalkyl-substituted α-diimine (DI) ligands to bis(1,5 cyclooctadiene) nickel (or (COD)2Ni) resulted in the formation of two new nickel complexes with the general formula of (Me2NPrDI)2Ni and (PyEtDI)2Ni. Investigation of these complexes by 1H NMR spectroscopy revealed diimine coordination but also the absence of amine arm coordination. Using the 1H NMR spectra in conjunction with structures determined through single crystal X-ray diffraction, the electronic structure of both complexes was described as having a Ni(II) metal center that is antiferromagnetically coupled to 2 DI radical monoanions. A greater ligand field was sought by replacing the pendant amines with phosphine groups on the DI ligands. This yielded ligands with the general formula (Ph2PPrDI) and (Ph2PEtDI). Upon addition to (COD)2Ni, each ligand immediately displaced both COD ligands from the Ni0 center to produce new κ4 N,N,P,P complexes, (Ph2PPrDI)Ni and (Ph2PEtDI)Ni, as observed via single crystal X-ray diffraction and NMR spectroscopy. Reduction of the DI backbone was observed in both complexes, with both complexes being described as having a Ni(I) metal center that is antiferromagnetically coupled to a DI radical monoanion. In addition to alkylphosphine substituted DI ligands, the coordination of a pyridine diimine (PDI) ligand featuring pendant alkylphosphines was also investigated. The addition of (Ph2PPrPDI) to (COD)2Ni produced a new paramagnetic (μeff = 1.21 μB), κ4-N,N,N,P complex identified as (Ph2PPrPDI)Ni. Reduction of the PDI chelate was observed through single crystal X-ray diffraction with the electronic structure described as having a low-spin Ni(I) metal center that is weakly coupled to a PDI radical monoanion (SNi = 1/2). The ability of the three Ni complexes to mediate the hydrosilylation of several unsaturated organic substrates was subsequently investigated. Using a range of catalyst loadings, the hydrosilylation of various substituted ketones afforded a mixture of both the mono- and di-hydrosilylated products within 24 hours, while the hydrosilylation of various substituted aldehydes afforded the mono-hydrosilylated product almost exclusively within hours. (Ph2PEtDI)Ni and (Ph2PPrPDI)Ni were identified as the most effective catalysts for the hydrosilylation of aldehydes at ambient temperature using catalyst loadings of 1 mol%.
ContributorsPorter, Tyler Mathew (Author) / Trovitch, Ryan (Thesis director) / Jones, Anne (Committee member) / Mujica, Vladimiro (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor)
Created2014-05
Description
The ability to accurately predict the oxidation and reduction potentials of molecules is very useful in various fields and applications. Quantum mechanical calculations can be used to access this information, yet sometimes the usefulness of these calculations can be limited because of the computational requirements for large systems. Methodologies that yield strong linear correlations between calculations and experimental data have been reported, however the balance between accuracy and computational cost is always a major issue. In this work, linear correlations (with an R-2 value of up to 0.9990) between DFT-calculated HOMO/LUMO energies and 70 redox potentials from a series of 51 polycyclic aromatic hydrocarbons (obtained from the literature) are presented. The results are compared to previously reported linear correlations that were obtained with a more expensive computational methodology based on a Born-Haber thermodynamic cycle. It is shown in this article that similar or better correlations can be obtained with a simple and cheaper calculation.
ContributorsMendez-Hernandez, Dalvin (Author) / Pilarisetty, Tarakeshwar (Author) / Gust, Devens (Author) / Moore, Thomas (Author) / Moore, Ana (Author) / Mujica, Vladimiro (Author) / Department of Chemistry and Biochemistry (Contributor) / College of Liberal Arts and Sciences (Contributor) / School of Molecular Sciences (Contributor)
Created2013-10-28
Description
A major challenge with tissue samples used for biopsies is the inability to monitor their molecular quality before diagnostic testing. When tissue is resected from a patient, the cells are removed from their blood supply and normal temperature-controlled environment, which causes significant biological stress. As a result, the molecular composition and integrity undergo significant change. Currently, there is no method to track the effects of these artefactual stresses on the sample tissue to determine any deviations from the actual patient physiology. Without a way to track these changes, pathologists have to blindly trust that the tissue samples they are given are of high quality and fit for molecular analysis; physicians use the analysis to make diagnoses and treatment plans based on the assumption that the samples are valid. A possible way to track the quality of the tissue is by measuring volatile organic compounds (VOCs) released from the samples. VOCs are carbon-based chemicals with high vapor pressure at room temperature. There are over 1,800 known VOCs within humans and a number of these exist in every tissue sample. They are individualized and often indicative of a person’s metabolic condition. For this reason, VOCs are often used for diagnostic purposes. Their usefulness in diagnostics, reflectiveness of a person’s metabolic state, and accessibility lends them to being beneficial for tracking degradation. We hypothesize that there is a relationship between the change in concentration of the volatile organic compounds of a sample, and the molecular quality of a sample. This relationship is what would indicate the accuracy of the tissue quality used for a biopsy in relation to the tissue within the body.
ContributorsSharma, Nandini (Co-author) / Fragoso, Claudia (Co-author) / Grenier, Tyler (Co-author) / Hanson, Abigail (Co-author) / Compton, Carolyn (Thesis director) / Tao, Nongjian (Committee member) / Moakley, George (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Industrial interest in electrocatalytic production of hydrogen has stimulated considerable research in understanding hydrogenases, the biological catalysts for proton reduction, and related synthetic mimics. Structurally closely related complexes are often synthesized to define structure-function relationships and optimize catalysis. However, this process can also lead to drastic and unpredictable changes in the catalytic behavior. In this paper, we use density functional theory calculations to identify changes in the electronic structure of [Ni(bdt)(dppf)] (bdt = 1,2-benzenedithiolate, dppf = 1,1ʹ-bis(diphenylphosphino)ferrocene) relative to [Ni(tdt)(dppf)] (tdt = toluene-3,4-dithiol) as a means to explain the substantially reduced electrocatalytic activity of the tdt complex. An increased likelihood of protonation at the sulfur sites of the tdt complex relative to the Ni is revealed. This decreased propensity of metal protonation may lead to less efficient metal-hydride production and subsequently catalysis.
ContributorsHerringer, Nicholas Stephen (Author) / Jones, Anne (Thesis director) / Mujica, Vladimiro (Committee member) / Pilarisetty, Tarakeshwar (Committee member) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The movement of energy within a material is at the heart of numerous fundamental properties of chemistry and physics. Studying the process of photo-absorption in real time provides key insights into how energy is captured, stabilized, and dissipated within a material. The work presented in this thesis uses ultrafast time-of-flight mass spectrometry and computational modeling to observe and understand the properties of photo-excited states within molecules and clusters. Experimental results provide direct measurement of excited state lifetimes, while computational modeling provides a more thorough understanding of the movement of energy within an excited state. Excited state dynamics in covalent molecules such as n-butyl bromide (C4H9Br), presented in Chapter 4, demonstrate the significance of IVR of photo-excited states. Exciting to the high energy Rydberg manifold leads to predissociation into fragments of various lengths and degrees of saturation but the predissociation process is disrupted by energy redistribution into hot vibrational states. Experimental lifetimes show that IVR occurs over rapidly (~ 600 fs) leaving less energy for bond dissociation. Additionally, a long-lived feature in the dynamics of C4H9+ shows evidence of ion-pair formation – a known phenomenon which creates a stable A+/B- pair separated by several angstroms and occurring at energies lower than direct ionization. The results of this research show the dynamics of energy transfer into bond fragmentation, kinetic energy, and vibrational motion.
Metal-oxide clusters are unique materials which are representative of bulk materials but with quantized excited states instead of bands and as such can be used as atomically precise analogs to semiconducting materials. Excited state lifetimes and theoretical descriptors of electron-hole interactions of titanium oxide clusters, presented in Chapter 5, shows the significance of structure and oxidation of charge-transfer materials. Modeling the excited states of the photo-generated electrons and holes provides a window into the dynamics of charge-transfer and electron-hole separation and recombination in bulk materials. Furthermore, changes in the oxidation of the cluster have a dramatic impact on the nature of excited states and overall cluster properties. Such changes are analogous to oxygen defects in bulk materials and are critical for understanding reaction chemistry at defect sites.
ContributorsHeald, Lauren (Author) / Sayres, Scott G (Thesis advisor) / Seo, Dong-Kyun (Committee member) / Mujica, Vladimiro (Committee member) / Arizona State University (Publisher)
Created2022
Description
In the developing field of nonlinear plasmonics, it is important to understand the nonlinear responses of the metallic nanostructures. In the present thesis, rigorous electrodynamical simulations based on the fully vectorial three-dimensional nonlinear hydrodynamic Drude model describing metal coupled to Maxwell's equations are performed to investigate linear and nonlinear responses of the plasmonic materials and their coupling with quantum emitters.The first part of this thesis is devoted to analyzing properties of the localized surface plasmon resonances of metallic nanostructures and their nonlinear optical responses. The behavior of the second harmonic is investigated as a function of various physical parameters at different plasmonic interfaces, revealing highly complex dynamics. By collaborating with several research teams, simulations are proven to be in close agreement with experiments, both quantitative and qualitative.
The second part of the thesis explores the strong coupling regime and its influence on the second harmonic generation. Considering plasmonic systems of molecules and periodic nanohole arrays on equal footing in the nonlinear regime is done for the first time. The results obtained are supported by a simple analytical model.
ContributorsDrobnyh, Elena (Author) / Sukharev, Maxim (Thesis advisor) / Schmidt, Kevin (Committee member) / Goodnick, Stephen (Committee member) / Mujica, Vladimiro (Committee member) / Arizona State University (Publisher)
Created2022
Description
Molecular structures and dynamics in amorphous materials present unique experimental challenges compared with the characterization of crystalline solids. Liquids and glassy solids have many applications in industry such as ionic liquids for fuel cells or biomolecule stabilizing agents, enhancing pharmaceuticals dissolution rates, and modified high performance biopolymers like silk for textile, biomedical, drug delivery, among many others. Amorphous materials are metastable, with kinetic profiles of phase transitions depending on relaxation dynamics, thermal history, plus factors such as temperature, pressure, and humidity. Understanding molecular structure and phase transitions of amorphous states of small molecules and biopolymers is broadly important for realizing their applications. The structure of liquid and glassy states of the drugs carbamazepine (CBZ) and indomethacin (IMC) were studied with solid-state nuclear magnetic resonance (ssNMR) spectroscopy, high energy X-ray diffraction, Fourier Infrared Transform Spectroscopy (FTIR), differential scanning calorimetry (DSC), and Empirical Potential Structure Refinement (EPSR). Both drugs have multiple crystalline polymorphs with slow dissolution kinetics, necessitating stable glassy or polymer dispersed formulations. More hydrogen bonds per CBZ molecule and a larger distribution of oligomeric states in the glass versus the liquid than expected. The chlorobenzyl ring of crystalline and glassy IMC measured with ssNMR were surprisingly found to have similar mobility. Crucially, humidity strongly affects glass structure, highlighting the importance of combining modeling techniques like EPSR with careful sample preparation for proper interpretation. Highly basic protic ionic liquids with low ∆pKa were synthesized with metathesis rather than proton transfer and characterized using NMR and dielectric spectroscopy. Finally, the protein secondary structure of spider egg sac silk was studied using ssNMR, FTIR, and scanning electron microscopy. Tubuliform silk found in spider egg sacs has extensive β-sheet domains which form nanocrystallites within an amorphous matrix. Structural predictions and spectroscopic measurements of tubuliform silk solution are mostly α-helical, with the mechanism of structural rearrangement to the β-sheet rich fiber unknown. The movement of spiders during egg silk spinning make in situ experiments difficult practically. This work is the first observation that tubuliform silk of Argiope aurantia after liquid crystalline spinning exits the spinneret as a predominantly (~70%) β-sheet fiber.
ContributorsEdwards, Angela Diane (Author) / Yarger, Jeffery L (Thesis advisor) / Liu, Yan (Committee member) / Mujica, Vladimiro (Committee member) / Arizona State University (Publisher)
Created2022
Description
Archival data for 32 countries were collected and a bivariate correlational analysis was run to determine any correlations between the predictors (tightness and individualism) and predicted variables (health outcomes and social behaviors).
ContributorsHsu, Michael (Author) / Sau-Kwan, Virginia (Thesis director) / Mujica, Vladimiro (Committee member) / Bunker, Cameron (Committee member) / Barrett, The Honors College (Contributor) / School of Molecular Sciences (Contributor) / School of International Letters and Cultures (Contributor)
Created2022-05
Description
An Exciton is an excited state of an atom that can move between atoms in a lattice, and can be viewed as a quasi-particle. I studied the dynamics of an Exciton wave packet traveling along a line of atoms, and how the medium the wave packet travels in affects said dynamics, via numerical simulation.
ContributorsSaadi, Tanner (Author) / Sukharev, Maxim (Thesis director) / Mujica, Vladimiro (Committee member) / Barrett, The Honors College (Contributor) / College of Integrative Sciences and Arts (Contributor)
Created2022-05