Theses and Dissertations
This collection includes both ASU Theses and Dissertations, submitted by graduate students, and the Barrett, Honors College theses submitted by undergraduate students.
Displaying 1 - 5 of 5
Filtering by
- Creators: Montgomery, Douglas C.
Description
Accelerated life testing (ALT) is the process of subjecting a product to stress conditions (temperatures, voltage, pressure etc.) in excess of its normal operating levels to accelerate failures. Product failure typically results from multiple stresses acting on it simultaneously. Multi-stress factor ALTs are challenging as they increase the number of experiments due to the stress factor-level combinations resulting from the increased number of factors. Chapter 2 provides an approach for designing ALT plans with multiple stresses utilizing Latin hypercube designs that reduces the simulation cost without loss of statistical efficiency. A comparison to full grid and large-sample approximation methods illustrates the approach computational cost gain and flexibility in determining optimal stress settings with less assumptions and more intuitive unit allocations.
Implicit in the design criteria of current ALT designs is the assumption that the form of the acceleration model is correct. This is unrealistic assumption in many real-world problems. Chapter 3 provides an approach for ALT optimum design for model discrimination. We utilize the Hellinger distance measure between predictive distributions. The optimal ALT plan at three stress levels was determined and its performance was compared to good compromise plan, best traditional plan and well-known 4:2:1 compromise test plans. In the case of linear versus quadratic ALT models, the proposed method increased the test plan's ability to distinguish among competing models and provided better guidance as to which model is appropriate for the experiment.
Chapter 4 extends the approach of Chapter 3 to ALT sequential model discrimination. An initial experiment is conducted to provide maximum possible information with respect to model discrimination. The follow-on experiment is planned by leveraging the most current information to allow for Bayesian model comparison through posterior model probability ratios. Results showed that performance of plan is adversely impacted by the amount of censoring in the data, in the case of linear vs. quadratic model form at three levels of constant stress, sequential testing can improve model recovery rate by approximately 8% when data is complete, but no apparent advantage in adopting sequential testing was found in the case of right-censored data when censoring is in excess of a certain amount.
Implicit in the design criteria of current ALT designs is the assumption that the form of the acceleration model is correct. This is unrealistic assumption in many real-world problems. Chapter 3 provides an approach for ALT optimum design for model discrimination. We utilize the Hellinger distance measure between predictive distributions. The optimal ALT plan at three stress levels was determined and its performance was compared to good compromise plan, best traditional plan and well-known 4:2:1 compromise test plans. In the case of linear versus quadratic ALT models, the proposed method increased the test plan's ability to distinguish among competing models and provided better guidance as to which model is appropriate for the experiment.
Chapter 4 extends the approach of Chapter 3 to ALT sequential model discrimination. An initial experiment is conducted to provide maximum possible information with respect to model discrimination. The follow-on experiment is planned by leveraging the most current information to allow for Bayesian model comparison through posterior model probability ratios. Results showed that performance of plan is adversely impacted by the amount of censoring in the data, in the case of linear vs. quadratic model form at three levels of constant stress, sequential testing can improve model recovery rate by approximately 8% when data is complete, but no apparent advantage in adopting sequential testing was found in the case of right-censored data when censoring is in excess of a certain amount.
ContributorsNasir, Ehab (Author) / Pan, Rong (Thesis advisor) / Runger, George C. (Committee member) / Gel, Esma (Committee member) / Kao, Ming-Hung (Committee member) / Montgomery, Douglas C. (Committee member) / Arizona State University (Publisher)
Created2014
Description
For more than twenty years, clinical researchers have been publishing data regarding incidence and risk of adverse events (AEs) incurred during hospitalizations. Hospitals have standard operating policies and procedures (SOPP) to protect patients from AE. The AE specifics (rates, SOPP failures, timing and risk factors) during heart failure (HF) hospitalizations are unknown. There were 1,722 patients discharged with a primary diagnosis of HF from an academic hospital between January 2005 and December 2007. Three hundred eighty-one patients experienced 566 AEs, classified into four categories: medication (43.9%), infection (18.9%), patient care (26.3%), or procedural (10.9%). Three distinct analyses were performed: 1) patient's perspective of SOPP reliability including cumulative distribution and hazard functions of time to AEs; 2) Cox proportional hazards model to determine independent patient-specific risk factors for AEs; and 3) hospital administration's perspective of SOPP reliability through three years of the study including cumulative distribution and hazard functions of time between AEs and moving range statistical process control (SPC) charts for days between failures of each type. This is the first study, to our knowledge, to consider reliability of SOPP from both the patient's and hospital administration's perspective. AE rates in hospitalized patients are similar to other recently published reports and did not improve during the study period. Operations research methodologies will be necessary to improve reliability of care delivered to hospitalized patients.
ContributorsHuddleston, Jeanne (Author) / Fowler, John (Thesis advisor) / Montgomery, Douglas C. (Thesis advisor) / Gel, Esma (Committee member) / Shunk, Dan (Committee member) / Arizona State University (Publisher)
Created2012
Description
This dissertation presents methods for addressing research problems that currently can only adequately be solved using Quality Reliability Engineering (QRE) approaches especially accelerated life testing (ALT) of electronic printed wiring boards with applications to avionics circuit boards. The methods presented in this research are generally applicable to circuit boards, but the data generated and their analysis is for high performance avionics. Avionics equipment typically requires 20 years expected life by aircraft equipment manufacturers and therefore ALT is the only practical way of performing life test estimates. Both thermal and vibration ALT induced failure are performed and analyzed to resolve industry questions relating to the introduction of lead-free solder product and processes into high reliability avionics. In chapter 2, thermal ALT using an industry standard failure machine implementing Interconnect Stress Test (IST) that simulates circuit board life data is compared to real production failure data by likelihood ratio tests to arrive at a mechanical theory. This mechanical theory results in a statistically equivalent energy bound such that failure distributions below a specific energy level are considered to be from the same distribution thus allowing testers to quantify parameter setting in IST prior to life testing. In chapter 3, vibration ALT comparing tin-lead and lead-free circuit board solder designs involves the use of the likelihood ratio (LR) test to assess both complete failure data and S-N curves to present methods for analyzing data. Failure data is analyzed using Regression and two-way analysis of variance (ANOVA) and reconciled with the LR test results that indicating that a costly aging pre-process may be eliminated in certain cases. In chapter 4, vibration ALT for side-by-side tin-lead and lead-free solder black box designs are life tested. Commercial models from strain data do not exist at the low levels associated with life testing and need to be developed because testing performed and presented here indicate that both tin-lead and lead-free solders are similar. In addition, earlier failures due to vibration like connector failure modes will occur before solder interconnect failures.
ContributorsJuarez, Joseph Moses (Author) / Montgomery, Douglas C. (Thesis advisor) / Borror, Connie M. (Thesis advisor) / Gel, Esma (Committee member) / Mignolet, Marc (Committee member) / Pan, Rong (Committee member) / Arizona State University (Publisher)
Created2012
Description
Public health surveillance is a special case of the general problem where counts (or rates) of events are monitored for changes. Modern data complements event counts with many additional measurements (such as geographic, demographic, and others) that comprise high-dimensional covariates. This leads to an important challenge to detect a change that only occurs within a region, initially unspecified, defined by these covariates. Current methods are typically limited to spatial and/or temporal covariate information and often fail to use all the information available in modern data that can be paramount in unveiling these subtle changes. Additional complexities associated with modern health data that are often not accounted for by traditional methods include: covariates of mixed type, missing values, and high-order interactions among covariates. This work proposes a transform of public health surveillance to supervised learning, so that an appropriate learner can inherently address all the complexities described previously. At the same time, quantitative measures from the learner can be used to define signal criteria to detect changes in rates of events. A Feature Selection (FS) method is used to identify covariates that contribute to a model and to generate a signal. A measure of statistical significance is included to control false alarms. An alternative Percentile method identifies the specific cases that lead to changes using class probability estimates from tree-based ensembles. This second method is intended to be less computationally intensive and significantly simpler to implement. Finally, a third method labeled Rule-Based Feature Value Selection (RBFVS) is proposed for identifying the specific regions in high-dimensional space where the changes are occurring. Results on simulated examples are used to compare the FS method and the Percentile method. Note this work emphasizes the application of the proposed methods on public health surveillance. Nonetheless, these methods can easily be extended to a variety of applications where counts (or rates) of events are monitored for changes. Such problems commonly occur in domains such as manufacturing, economics, environmental systems, engineering, as well as in public health.
ContributorsDavila, Saylisse (Author) / Runger, George C. (Thesis advisor) / Montgomery, Douglas C. (Committee member) / Young, Dennis (Committee member) / Gel, Esma (Committee member) / Arizona State University (Publisher)
Created2010
Description
One of the critical issues in the U.S. healthcare sector is attributed to medications management. Mismanagement of medications can not only bring more unfavorable medical outcomes for patients, but also imposes avoidable medical expenditures, which can be partially accounted for the enormous $750 billion that the American healthcare system wastes annually. The lack of efficiency in medical outcomes can be due to several reasons. One of them is the problem of drug intensification: a problem associated with more aggressive management of medications and its negative consequences for patients.
To address this and many other challenges in regard to medications mismanagement, I take advantage of data-driven methodologies where a decision-making framework for identifying optimal medications management strategies will be established based on real-world data. This data-driven approach has the advantage of supporting decision-making processes by data analytics, and hence, the decision made can be validated by verifiable data. Thus, compared to merely theoretical methods, my methodology will be more applicable to patients as the ultimate beneficiaries of the healthcare system.
Based on this premise, in this dissertation I attempt to analyze and advance three streams of research that are influenced by issues involving the management of medications/treatments for different medical contexts. In particular, I will discuss (1) management of medications/treatment modalities for new-onset of diabetes after solid organ transplantations and (2) epidemic of opioid prescription and abuse.
To address this and many other challenges in regard to medications mismanagement, I take advantage of data-driven methodologies where a decision-making framework for identifying optimal medications management strategies will be established based on real-world data. This data-driven approach has the advantage of supporting decision-making processes by data analytics, and hence, the decision made can be validated by verifiable data. Thus, compared to merely theoretical methods, my methodology will be more applicable to patients as the ultimate beneficiaries of the healthcare system.
Based on this premise, in this dissertation I attempt to analyze and advance three streams of research that are influenced by issues involving the management of medications/treatments for different medical contexts. In particular, I will discuss (1) management of medications/treatment modalities for new-onset of diabetes after solid organ transplantations and (2) epidemic of opioid prescription and abuse.
ContributorsBoloori, Alireza (Author) / Saghafian, Soroush (Thesis advisor) / Fowler, John (Thesis advisor) / Gel, Esma (Committee member) / Cook, Curtiss B (Committee member) / Montgomery, Douglas C. (Committee member) / Arizona State University (Publisher)
Created2019