Theses and Dissertations
This collection includes both ASU Theses and Dissertations, submitted by graduate students, and the Barrett, Honors College theses submitted by undergraduate students.
Displaying 1 - 3 of 3
Filtering by
- Creators: Green, Matthew
Description
A new type of electronics was envisioned, namely edible electronics. Edible electronics are made by Food and Drug Administration (FDA) certified edible materials which can be eaten and digested by human body. Different from implantable electronics, test or treatment using edible electronics doesn’t require operations and perioperative complications.
This dissertation bridges the food industry, material sciences, device fabrication, and biomedical engineering by demonstrating edible supercapacitors and electronic components and devices such as pH sensor.
Edible supercapacitors were fabricated using food materials from grocery store. 5 of them were connected in series to power a snake camera. Tests result showed that the current generated by supercapacitor have the ability to kill bacteria. Next more food, processed food and non-toxic level electronic materials were investigated. A “preferred food kit” was created for component fabrication based on the investigation. Some edible electronic components, such as wires, resistor, inductor, etc., were developed and characterized utilizing the preferred food kit. These components make it possible to fabricate edible electronic/device in the future work. Some edible electronic components were integrated into an edible electronic system/device. Then edible pH sensor was introduced and fabricated. This edible pH sensor can be swallowed and test pH of gastric fluid. PH can be read in a phone within seconds after the pH sensor was swallowed. As a side project, an edible double network gel electrolyte was synthesized for the edible supercapacitor.
This dissertation bridges the food industry, material sciences, device fabrication, and biomedical engineering by demonstrating edible supercapacitors and electronic components and devices such as pH sensor.
Edible supercapacitors were fabricated using food materials from grocery store. 5 of them were connected in series to power a snake camera. Tests result showed that the current generated by supercapacitor have the ability to kill bacteria. Next more food, processed food and non-toxic level electronic materials were investigated. A “preferred food kit” was created for component fabrication based on the investigation. Some edible electronic components, such as wires, resistor, inductor, etc., were developed and characterized utilizing the preferred food kit. These components make it possible to fabricate edible electronic/device in the future work. Some edible electronic components were integrated into an edible electronic system/device. Then edible pH sensor was introduced and fabricated. This edible pH sensor can be swallowed and test pH of gastric fluid. PH can be read in a phone within seconds after the pH sensor was swallowed. As a side project, an edible double network gel electrolyte was synthesized for the edible supercapacitor.
ContributorsXu, Wenwen (Author) / Jiang, Hanqing (Thesis advisor) / Dai, Lenore (Committee member) / Green, Matthew (Committee member) / Mu, Bin (Committee member) / Yu, Hongbin (Committee member) / Arizona State University (Publisher)
Created2019
Description
Water recovery from impaired sources, such as reclaimed wastewater, brackish groundwater, and ocean water, is imperative as freshwater resources are under great pressure. Complete reuse of urine wastewater is also necessary to sustain life on space exploration missions of greater than one year’s duration. Currently, the Water Recovery System (WRS) used on the National Aeronautics and Space Administration (NASA) shuttles recovers only 70% of generated wastewater.1 Current osmotic processes show high capability to increase water recovery from wastewater. However, commercial reverse osmosis (RO) membranes rapidly degrade when exposed to pretreated urine-containing wastewater. Also, non-ionic small molecules substances (i.e., urea) are very poorly rejected by commercial RO membranes.
In this study, an innovative composite membrane that integrates water-selective molecular sieve particles into a liquid-barrier chemically resistant polymer film is synthetized. This plan manipulates distinctive aspects of the two materials used to create the membranes: (1) the innate permeation and selectivity of the molecular sieves, and (2) the decay-resistant, versatile, and mechanical strength of the liquid-barrier polymer support matrix.
To synthesize the membrane, Linde Type A (LTA) zeolite particles are anchored to the porous substrate, producing a single layer of zeolite particles capable of transporting water through the membrane. Thereafter, coating the chemically resistant latex polymer filled the space between zeolites. Finally, excess polymer was etched from the surface to expose the zeolites to the feed solution. The completed membranes were tested in reverse osmosis mode with deionized water, sodium chloride, and rhodamine solutions to determine the suitability for water recovery.
The main distinguishing characteristics of the new membrane design compared with current composite membrane include: (1) the use of an impermeable polymer broadens the range of chemical resistant polymers that can be used as the polymer matrix; (2) the use of zeolite particles with specific pore size insures the high rejection of the neutral molecules since water is transported through the zeolite rather than the polymer; (3) the use of latex dispersions, environmentally friendly water based-solutions, as the polymer matrix shares the qualities of low volatile organic compound, low cost, and non- toxicity.
In this study, an innovative composite membrane that integrates water-selective molecular sieve particles into a liquid-barrier chemically resistant polymer film is synthetized. This plan manipulates distinctive aspects of the two materials used to create the membranes: (1) the innate permeation and selectivity of the molecular sieves, and (2) the decay-resistant, versatile, and mechanical strength of the liquid-barrier polymer support matrix.
To synthesize the membrane, Linde Type A (LTA) zeolite particles are anchored to the porous substrate, producing a single layer of zeolite particles capable of transporting water through the membrane. Thereafter, coating the chemically resistant latex polymer filled the space between zeolites. Finally, excess polymer was etched from the surface to expose the zeolites to the feed solution. The completed membranes were tested in reverse osmosis mode with deionized water, sodium chloride, and rhodamine solutions to determine the suitability for water recovery.
The main distinguishing characteristics of the new membrane design compared with current composite membrane include: (1) the use of an impermeable polymer broadens the range of chemical resistant polymers that can be used as the polymer matrix; (2) the use of zeolite particles with specific pore size insures the high rejection of the neutral molecules since water is transported through the zeolite rather than the polymer; (3) the use of latex dispersions, environmentally friendly water based-solutions, as the polymer matrix shares the qualities of low volatile organic compound, low cost, and non- toxicity.
ContributorsKhosravi, Afsaneh Khosravi (Author) / Lind, Mary Laura (Thesis advisor) / Dai, Lenore (Committee member) / Green, Matthew (Committee member) / Lin, Jerry (Committee member) / Seo, Don (Committee member) / Arizona State University (Publisher)
Created2016
Description
Managing water resources has become one of the most pressing concerns of scientists both in academia and industry. The reverse osmosis (RO) water treatment process is a well-researched technology among the pressure driven processes to produce potable water. RO is an energy intensive process and often RO membranes are susceptible to fouling and scaling that drives up operational cost and hinder the efficiency. To increase the performance of RO membranes the feed water is pretreated to remove pollutants before desalination. This work aims to fabricate pretreatment membranes to prevent the effects of fouling and scaling by introducing hydrophilic character to membrane. This work explores electrospinning, a cost-effective and scalable technique, to blend two polymers into a nonwoven membrane comprised of fibers ~100 nm - 10 µm in diameter.
A rotary drum collector holding the mat was used to simultaneously collect the electrospun hydrophobic poly(vinyl chloride) (PVC) and hydrophilic poly(vinyl alcohol) (PVA) fibers from two separate solutions. The hydrophilicity of the resulting membrane was tuned by controlling the relative deposition rate of PVA onto the co-spun mat. Fiber diameter and morphologies were characterized by scanning electron microscopy, and Fourier-transform infrared spectroscopy and Confocal fluorescence microscopy further confirmed the presence of both polymers. Moreover, a rigorous analysis to map the PVA/PVC concentration was established to accurately report the relative concentrations of the two polymers on the co-spun mat. After electrospinning, the PVA in the co-spun mats were cross-linked with poly(ethylene glycol) diacid to impart mechanical strength and tune the porosity.
EDS analysis revealed inconsistencies in the mass deposition of both polymers suggesting an improvement in the current experimental design to establish a meaningful relationship between PVA concentration and hydrophilicity. However, tensile test revealed that co-spun mats with high mass flow ratios of PVA possessed high mechanical strength showing a significant improvement in the Young’s Modulus. Furthermore, the co-spun mats were challenged with filtration experiments expecting a positive correlation of flux with PVA concentration. But it was found that with increased concentration, crosslinked PVA constricted PVC fibers minimizing the pores causing a lower flux and a dense membrane structure suitable for filtration.
A rotary drum collector holding the mat was used to simultaneously collect the electrospun hydrophobic poly(vinyl chloride) (PVC) and hydrophilic poly(vinyl alcohol) (PVA) fibers from two separate solutions. The hydrophilicity of the resulting membrane was tuned by controlling the relative deposition rate of PVA onto the co-spun mat. Fiber diameter and morphologies were characterized by scanning electron microscopy, and Fourier-transform infrared spectroscopy and Confocal fluorescence microscopy further confirmed the presence of both polymers. Moreover, a rigorous analysis to map the PVA/PVC concentration was established to accurately report the relative concentrations of the two polymers on the co-spun mat. After electrospinning, the PVA in the co-spun mats were cross-linked with poly(ethylene glycol) diacid to impart mechanical strength and tune the porosity.
EDS analysis revealed inconsistencies in the mass deposition of both polymers suggesting an improvement in the current experimental design to establish a meaningful relationship between PVA concentration and hydrophilicity. However, tensile test revealed that co-spun mats with high mass flow ratios of PVA possessed high mechanical strength showing a significant improvement in the Young’s Modulus. Furthermore, the co-spun mats were challenged with filtration experiments expecting a positive correlation of flux with PVA concentration. But it was found that with increased concentration, crosslinked PVA constricted PVC fibers minimizing the pores causing a lower flux and a dense membrane structure suitable for filtration.
ContributorsMithaiwala, Husain (Author) / Green, Matthew (Thesis advisor) / Dai, Lenore (Committee member) / Holloway, Julianne (Committee member) / Arizona State University (Publisher)
Created2020