Theses and Dissertations
This collection includes both ASU Theses and Dissertations, submitted by graduate students, and the Barrett, Honors College theses submitted by undergraduate students.
Displaying 1 - 10 of 10
Filtering by
- Creators: Ogras, Umit Y.
Description
Deep neural networks (DNNs), as a main-stream algorithm for various AI tasks, achieve higher accuracy at the cost of increased computational complexity and model size, posing great challenges to hardware platforms. This dissertation first tackles the design challenges of resistive random-access-memory (RRAM) based in-memory computing (IMC) architectures. A new metric, model stability from the loss landscape, is proposed to help shed light on accuracy under variations and model compression and guide a novel variation-aware training (VAT) solution. The proposed method effectively improves post-mapping accuracy of multiple datasets. Next, a hybrid RRAM/SRAM IMC DNN inference accelerator is developed, that integrates an RRAM-based IMC macro, a reconfigurable SRAM-based multiply-accumulate (MAC) macro, and a programmable shifter. The hybrid IMC accelerator fully recovers the inference accuracy post the mapping. Furthermore, this dissertation researches on architectural optimizations for high IMC utilization, low on-chip communication cost, and low energy-delay product (EDP), including on-chip interconnect design, PE array utilization, and tile-to-router mapping and scheduling. The optimal choice of on-chip interconnect results in up to 6x improvement in energy-delay-area product for RRAM IMC architectures. Furthermore, the PE and NoC optimizations show up to 62% improvement in PE utilization, 78% reduction in area, and 78% lower energy-area product for a wide range of modern DNNs. Finally, this dissertation proposes a novel chiplet-based IMC benchmarking simulator, SIAM, and a heterogeneous chiplet IMC architecture to address the limitations of a monolithic DNN accelerator. SIAM utilizes model-based and cycle-accurate simulation to provide a scalable and flexible architecture. SIAM is calibrated against a published silicon result, SIMBA, from Nvidia. The heterogeneous architecture utilizes a custom mapping with a bank of big and little chiplets, and a hybrid network-on-package (NoP) to optimize the utilization, interconnect bandwidth, and energy efficiency. The proposed big-little chiplet-based RRAM IMC architecture significantly improves energy efficiency at lower area, compared to conventional GPUs. In summary, this dissertation comprehensively investigates novel methods that encompass device, circuits, architecture, packaging, and algorithm to design scalable high-performance and energy-efficient IMC architectures.
ContributorsKrishnan, Gokul (Author) / Cao, Yu (Thesis advisor) / Seo, Jae-Sun (Committee member) / Chakrabarti, Chaitali (Committee member) / Ogras, Umit Y. (Committee member) / Arizona State University (Publisher)
Created2022
How Does Technology Development Influence the Assessment of Parkinson’s Disease? A Systematic Review
Description
Parkinson’s disease (PD) is a neurological disorder with complicated and disabling motor and non-motor symptoms. The pathology for PD is difficult and expensive. Furthermore, it depends on patient diaries and the neurologist’s subjective assessment of clinical scales. Objective, accurate, and continuous patient monitoring have become possible with the advancement in mobile and portable equipment. Consequently, a significant amount of work has been done to explore new cost-effective and subjective assessment methods or PD symptoms. For example, smart technologies, such as wearable sensors and optical motion capturing systems, have been used to analyze the symptoms of a PD patient to assess their disease progression and even to detect signs in their nascent stage for early diagnosis of PD.
This review focuses on the use of modern equipment for PD applications that were developed in the last decade. Four significant fields of research were identified: Assistance diagnosis, Prognosis or Monitoring of Symptoms and their Severity, Predicting Response to Treatment, and Assistance to Therapy or Rehabilitation. This study reviews the papers published between January 2008 and December 2018 in the following four databases: Pubmed Central, Science Direct, IEEE Xplore and MDPI. After removing unrelated articles, ones published in languages other than English, duplicate entries and other articles that did not fulfill the selection criteria, 778 papers were manually investigated and included in this review. A general overview of PD applications, devices used and aspects monitored for PD management is provided in this systematic review.
This review focuses on the use of modern equipment for PD applications that were developed in the last decade. Four significant fields of research were identified: Assistance diagnosis, Prognosis or Monitoring of Symptoms and their Severity, Predicting Response to Treatment, and Assistance to Therapy or Rehabilitation. This study reviews the papers published between January 2008 and December 2018 in the following four databases: Pubmed Central, Science Direct, IEEE Xplore and MDPI. After removing unrelated articles, ones published in languages other than English, duplicate entries and other articles that did not fulfill the selection criteria, 778 papers were manually investigated and included in this review. A general overview of PD applications, devices used and aspects monitored for PD management is provided in this systematic review.
ContributorsDeb, Ranadeep (Author) / Ogras, Umit Y. (Thesis advisor) / Shill, Holly (Committee member) / Chakrabarti, Chaitali (Committee member) / Arizona State University (Publisher)
Created2019
Description
Mobile platforms are becoming highly heterogeneous by combining a powerful multiprocessor system-on-chip (MpSoC) with numerous resources including display, memory, power management IC (PMIC), battery and wireless modems into a compact package. Furthermore, the MpSoC itself is a heterogeneous resource that integrates many processing elements such as CPU cores, GPU, video, image, and audio processors. As a result, optimization approaches targeting mobile computing needs to consider the platform at various levels of granularity.
Platform energy consumption and responsiveness are two major considerations for mobile systems since they determine the battery life and user satisfaction, respectively. In this work, the models for power consumption, response time, and energy consumption of heterogeneous mobile platforms are presented. Then, these models are used to optimize the energy consumption of baseline platforms under power, response time, and temperature constraints with and without introducing new resources. It is shown, the optimal design choices depend on dynamic power management algorithm, and adding new resources is more energy efficient than scaling existing resources alone. The framework is verified through actual experiments on Qualcomm Snapdragon 800 based tablet MDP/T. Furthermore, usage of the framework at both design and runtime optimization is also presented.
Platform energy consumption and responsiveness are two major considerations for mobile systems since they determine the battery life and user satisfaction, respectively. In this work, the models for power consumption, response time, and energy consumption of heterogeneous mobile platforms are presented. Then, these models are used to optimize the energy consumption of baseline platforms under power, response time, and temperature constraints with and without introducing new resources. It is shown, the optimal design choices depend on dynamic power management algorithm, and adding new resources is more energy efficient than scaling existing resources alone. The framework is verified through actual experiments on Qualcomm Snapdragon 800 based tablet MDP/T. Furthermore, usage of the framework at both design and runtime optimization is also presented.
ContributorsGupta, Ujjwala (Author) / Ogras, Umit Y. (Thesis advisor) / Ozev, Sule (Committee member) / Chakrabarti, Chaitali (Committee member) / Arizona State University (Publisher)
Created2014
Description
Driven by stringent power and thermal constraints, heterogeneous multi-core processors, such as the ARM big-LITTLE architecture, are becoming increasingly popular. In this thesis, the use of low-power heterogeneous multi-cores as Microservers using web search as a motivational application is addressed. In particular, I propose a new family of scheduling policies for heterogeneous microservers that assign incoming search queries to available cores so as to optimize for performance metrics such as mean response time and service level agreements, while guaranteeing thermally-safe operation. Thorough experimental evaluations on a big-LITTLE platform demonstrate, on an heterogeneous eight-core Samsung Exynos 5422 MpSoC, with four big and little cores each, that naive performance oriented scheduling policies quickly result in thermal instability, while the proposed policies not only reduce peak temperature but also achieve 4.8x reduction in processing time and 5.6x increase in energy efficiency compared to baseline scheduling policies.
ContributorsJain, Sankalp (Author) / Ogras, Umit Y. (Thesis advisor) / Garg, Siddharth (Committee member) / Chakrabarti, Chaitali (Committee member) / Arizona State University (Publisher)
Created2015
Description
Nearly 60% of the world population uses a mobile phone, which is typically powered by a system-on-chip (SoC). While the mobile platform capabilities range widely, responsiveness, long battery life and reliability are common design concerns that are crucial to remain competitive. Consequently, state-of-the-art mobile platforms have become highly heterogeneous by combining a powerful SoC with numerous other resources, including display, memory, power management IC, battery and wireless modems. Furthermore, the SoC itself is a heterogeneous resource that integrates many processing elements, such as CPU cores, GPU, video, image, and audio processors. Therefore, CPU cores do not dominate the platform power consumption under many application scenarios.
Competitive performance requires higher operating frequency, and leads to larger power consumption. In turn, power consumption increases the junction and skin temperatures, which have adverse effects on the device reliability and user experience. As a result, allocating the power budget among the major platform resources and temperature control have become fundamental consideration for mobile platforms. Dynamic thermal and power management algorithms address this problem by putting a subset of the processing elements or shared resources to sleep states, or throttling their frequencies. However, an adhoc approach could easily cripple the performance, if it slows down the performance-critical processing element. Furthermore, mobile platforms run a wide range of applications with time varying workload characteristics, unlike early generations, which supported only limited functionality. As a result, there is a need for adaptive power and performance management approaches that consider the platform as a whole, rather than focusing on a subset. Towards this need, our specific contributions include (a) a framework to dynamically select the Pareto-optimal frequency and active cores for the heterogeneous CPUs, such as ARM big.Little architecture, (b) a dynamic power budgeting approach for allocating optimal power consumption to the CPU and GPU using performance sensitivity models for each PE, (c) an adaptive GPU frame time sensitivity prediction model to aid power management algorithms, and (d) an online learning algorithm that constructs adaptive run-time models for non-stationary workloads.
Competitive performance requires higher operating frequency, and leads to larger power consumption. In turn, power consumption increases the junction and skin temperatures, which have adverse effects on the device reliability and user experience. As a result, allocating the power budget among the major platform resources and temperature control have become fundamental consideration for mobile platforms. Dynamic thermal and power management algorithms address this problem by putting a subset of the processing elements or shared resources to sleep states, or throttling their frequencies. However, an adhoc approach could easily cripple the performance, if it slows down the performance-critical processing element. Furthermore, mobile platforms run a wide range of applications with time varying workload characteristics, unlike early generations, which supported only limited functionality. As a result, there is a need for adaptive power and performance management approaches that consider the platform as a whole, rather than focusing on a subset. Towards this need, our specific contributions include (a) a framework to dynamically select the Pareto-optimal frequency and active cores for the heterogeneous CPUs, such as ARM big.Little architecture, (b) a dynamic power budgeting approach for allocating optimal power consumption to the CPU and GPU using performance sensitivity models for each PE, (c) an adaptive GPU frame time sensitivity prediction model to aid power management algorithms, and (d) an online learning algorithm that constructs adaptive run-time models for non-stationary workloads.
ContributorsGupta, Ujjwala (Author) / Ogras, Umit Y. (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Kishinevsky, Michael (Committee member) / Dutt, Nikil (Committee member) / Arizona State University (Publisher)
Created2018
Description
Within the near future, a vast demand for autonomous vehicular techniques can be forecast on both aviation and ground platforms, including autonomous driving, automatic landing, air traffic management. These techniques usually rely on the positioning system and the communication system independently, where it potentially causes spectrum congestion. Inspired by the spectrum sharing technique, Communications and High-Precision Positioning (CHP2) system is invented to provide a high precision position service (precision ~1cm) while performing the communication task simultaneously under the same spectrum. CHP2 system is implemented on the consumer-off-the-shelf (COTS) software-defined radio (SDR) platform with customized hardware. Taking the advantages of the SDR platform, the completed baseband processing chain, time-of-arrival estimation (ToA), time-of-flight estimation (ToF) are mathematically modeled and then implemented onto the system-on-chip (SoC) system. Due to the compact size and cost economy, the CHP2 system can be installed on different aerial or ground platforms enabling a high-mobile and reconfigurable network.
In this dissertation report, the implementation procedure of the CHP2 system is discussed in detail. It mainly focuses on the system construction on the Xilinx Ultrascale+ SoC platform. The CHP2 waveform design, ToA solution, and timing exchanging algorithms are also introduced. Finally, several in-lab tests and over-the-air demonstrations are conducted. The demonstration shows the best ranging performance achieves the ~1 cm standard deviation and 10Hz refreshing rate of estimation by using a 10MHz narrow-band signal over 915MHz (US ISM) or 783MHz (EU Licensed) carrier frequency.
In this dissertation report, the implementation procedure of the CHP2 system is discussed in detail. It mainly focuses on the system construction on the Xilinx Ultrascale+ SoC platform. The CHP2 waveform design, ToA solution, and timing exchanging algorithms are also introduced. Finally, several in-lab tests and over-the-air demonstrations are conducted. The demonstration shows the best ranging performance achieves the ~1 cm standard deviation and 10Hz refreshing rate of estimation by using a 10MHz narrow-band signal over 915MHz (US ISM) or 783MHz (EU Licensed) carrier frequency.
ContributorsYu, Hanguang (Author) / Bliss, Daniel (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Alkhateeb, Ahmed (Committee member) / Ogras, Umit Y. (Committee member) / Arizona State University (Publisher)
Created2020
Description
This Master’s thesis includes the design, integration on-chip, and evaluation of a set of imitation learning (IL)-based scheduling policies: deep neural network (DNN)and decision tree (DT). We first developed IL-based scheduling policies for heterogeneous systems-on-chips (SoCs). Then, we tested these policies using a system-level domain-specific system-on-chip simulation framework [11]. Finally, we transformed them into efficient code using a cloud engine [1] and implemented on a user-space emulation framework [61] on a Unix-based SoC. IL is one area of machine learning (ML) and a useful method to train artificial intelligence (AI) models by imitating the decisions of an expert or Oracle that knows the optimal solution. This thesis's primary focus is to adapt an ML model to work on-chip and optimize the resource allocation for a set of domain-specific wireless and radar systems applications. Evaluation results with four streaming applications from wireless communications and radar domains show how the proposed IL-based scheduler approximates an offline Oracle expert with more than 97% accuracy and 1.20× faster execution time. The models have been implemented as an add-on, making it easy to port to other SoCs.
ContributorsHolt, Conrad Mestres (Author) / Ogras, Umit Y. (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Akoglu, Ali (Committee member) / Arizona State University (Publisher)
Created2020
Description
Many core modern multiprocessor systems-on-chip offers tremendous power and performance
optimization opportunities by tuning thousands of potential voltage, frequency
and core configurations. Applications running on these architectures are becoming increasingly
complex. As the basic building blocks, which make up the application, change during
runtime, different configurations may become optimal with respect to power, performance
or other metrics. Identifying the optimal configuration at runtime is a daunting task due
to a large number of workloads and configurations. Therefore, there is a strong need to
evaluate the metrics of interest as a function of the supported configurations.
This thesis focuses on two different types of modern multiprocessor systems-on-chip
(SoC): Mobile heterogeneous systems and tile based Intel Xeon Phi architecture.
For mobile heterogeneous systems, this thesis presents a novel methodology that can
accurately instrument different types of applications with specific performance monitoring
calls. These calls provide a rich set of performance statistics at a basic block level while the
application runs on the target platform. The target architecture used for this work (Odroid
XU3) is capable of running at 4940 different frequency and core combinations. With the
help of instrumented application vast amount of characterization data is collected that provides
details about performance, power and CPU state at every instrumented basic block
across 19 different types of applications. The vast amount of data collected has enabled
two runtime schemes. The first work provides a methodology to find optimal configurations
in heterogeneous architecture using classifiers and demonstrates an average increase
of 93%, 81% and 6% in performance per watt compared to the interactive, ondemand and
powersave governors, respectively. The second work using same data shows a novel imitation
learning framework for dynamically controlling the type, number, and the frequencies
of active cores to achieve an average of 109% PPW improvement compared to the default
governors.
This work also presents how to accurately profile tile based Intel Xeon Phi architecture
while training different types of neural networks using open image dataset on deep learning
framework. The data collected allows deep exploratory analysis. It also showcases how
different hardware parameters affect performance of Xeon Phi.
optimization opportunities by tuning thousands of potential voltage, frequency
and core configurations. Applications running on these architectures are becoming increasingly
complex. As the basic building blocks, which make up the application, change during
runtime, different configurations may become optimal with respect to power, performance
or other metrics. Identifying the optimal configuration at runtime is a daunting task due
to a large number of workloads and configurations. Therefore, there is a strong need to
evaluate the metrics of interest as a function of the supported configurations.
This thesis focuses on two different types of modern multiprocessor systems-on-chip
(SoC): Mobile heterogeneous systems and tile based Intel Xeon Phi architecture.
For mobile heterogeneous systems, this thesis presents a novel methodology that can
accurately instrument different types of applications with specific performance monitoring
calls. These calls provide a rich set of performance statistics at a basic block level while the
application runs on the target platform. The target architecture used for this work (Odroid
XU3) is capable of running at 4940 different frequency and core combinations. With the
help of instrumented application vast amount of characterization data is collected that provides
details about performance, power and CPU state at every instrumented basic block
across 19 different types of applications. The vast amount of data collected has enabled
two runtime schemes. The first work provides a methodology to find optimal configurations
in heterogeneous architecture using classifiers and demonstrates an average increase
of 93%, 81% and 6% in performance per watt compared to the interactive, ondemand and
powersave governors, respectively. The second work using same data shows a novel imitation
learning framework for dynamically controlling the type, number, and the frequencies
of active cores to achieve an average of 109% PPW improvement compared to the default
governors.
This work also presents how to accurately profile tile based Intel Xeon Phi architecture
while training different types of neural networks using open image dataset on deep learning
framework. The data collected allows deep exploratory analysis. It also showcases how
different hardware parameters affect performance of Xeon Phi.
ContributorsPatil, Chetan Arvind (Author) / Ogras, Umit Y. (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Shrivastava, Aviral (Committee member) / Arizona State University (Publisher)
Created2019
Description
The following document describes the hardware implementation and analysis of Temporal Interference Mitigation using High-Level Synthesis. As the problem of spectral congestion becomes more chronic and widespread, Electromagnetic radio frequency (RF) based systems are posing as viable solution to this problem. Among the existing RF methods Cooperation based systems have been a solution to a host of congestion problems. One of the most important elements of RF receiver is the spatially adaptive part of the receiver. Temporal Mitigation is vital technique employed at the receiver for signal recovery and future propagation along the radar chain.
The computationally intensive parts of temporal mitigation are identified and hardware accelerated. The hardware implementation is based on sequential approach with optimizations applied on the individual components for better performance.
An extensive analysis using a range of fixed point data types is performed to find the optimal data type necessary.
Finally a hybrid combination of data types for different components of temporal mitigation is proposed based on results from the above analysis.
The computationally intensive parts of temporal mitigation are identified and hardware accelerated. The hardware implementation is based on sequential approach with optimizations applied on the individual components for better performance.
An extensive analysis using a range of fixed point data types is performed to find the optimal data type necessary.
Finally a hybrid combination of data types for different components of temporal mitigation is proposed based on results from the above analysis.
ContributorsSiddiqui, Saquib Ahmad (Author) / Bliss, Daniel (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Ogras, Umit Y. (Committee member) / Jayasuriya, Suren (Committee member) / Arizona State University (Publisher)
Created2020
Description
Movement disorders are becoming one of the leading causes of functional disability due to aging populations and extended life expectancy. Diagnosis, treatment, and rehabilitation currently depend on the behavior observed in a clinical environment. After the patient leaves the clinic, there is no standard approach to continuously monitor the patient and report potential problems. Furthermore, self-recording is inconvenient and unreliable. To address these challenges, wearable health monitoring is emerging as an effective way to augment clinical care for movement disorders.
Wearable devices are being used in many health, fitness, and activity monitoring applications. However, their widespread adoption has been hindered by several adaptation and technical challenges. First, conventional rigid devices are uncomfortable to wear for long periods. Second, wearable devices must operate under very low-energy budgets due to their small battery capacities. Small batteries create a need for frequent recharging, which in turn leads users to stop using them. Third, the usefulness of wearable devices must be demonstrated through high impact applications such that users can get value out of them.
This dissertation presents solutions to solving the challenges faced by wearable devices. First, it presents an open-source hardware/software platform for wearable health monitoring. The proposed platform uses flexible hybrid electronics to enable devices that conform to the shape of the user’s body. Second, it proposes an algorithm to enable recharge-free operation of wearable devices that harvest energy from the environment. The proposed solution maximizes the performance of the wearable device under minimum energy constraints. The results of the proposed algorithm are, on average, within 3% of the optimal solution computed offline. Third, a comprehensive framework for human activity recognition (HAR), one of the first steps towards a solution for movement disorders is presented. It starts with an online learning framework for HAR. Experiments on a low power IoT device (TI-CC2650 MCU) with twenty-two users show 95% accuracy in identifying seven activities and their transitions with less than 12.5 mW power consumption. The online learning framework is accompanied by a transfer learning approach for HAR that determines the number of neural network layers to transfer among uses to enable efficient online learning. Next, a technique to co-optimize the accuracy and active time of wearable applications by utilizing multiple design points with different energy-accuracy trade-offs is presented. The proposed technique switches between the design points at runtime to maximize a generalized objective function under tight harvested energy budget constraints. Finally, we present the first ultra-low-energy hardware accelerator that makes it practical to perform HAR on energy harvested from wearable devices. The accelerator consumes 22.4 microjoules per operation using a commercial 65 nm technology. In summary, the solutions presented in this dissertation can enable the wider adoption of wearable devices.
Wearable devices are being used in many health, fitness, and activity monitoring applications. However, their widespread adoption has been hindered by several adaptation and technical challenges. First, conventional rigid devices are uncomfortable to wear for long periods. Second, wearable devices must operate under very low-energy budgets due to their small battery capacities. Small batteries create a need for frequent recharging, which in turn leads users to stop using them. Third, the usefulness of wearable devices must be demonstrated through high impact applications such that users can get value out of them.
This dissertation presents solutions to solving the challenges faced by wearable devices. First, it presents an open-source hardware/software platform for wearable health monitoring. The proposed platform uses flexible hybrid electronics to enable devices that conform to the shape of the user’s body. Second, it proposes an algorithm to enable recharge-free operation of wearable devices that harvest energy from the environment. The proposed solution maximizes the performance of the wearable device under minimum energy constraints. The results of the proposed algorithm are, on average, within 3% of the optimal solution computed offline. Third, a comprehensive framework for human activity recognition (HAR), one of the first steps towards a solution for movement disorders is presented. It starts with an online learning framework for HAR. Experiments on a low power IoT device (TI-CC2650 MCU) with twenty-two users show 95% accuracy in identifying seven activities and their transitions with less than 12.5 mW power consumption. The online learning framework is accompanied by a transfer learning approach for HAR that determines the number of neural network layers to transfer among uses to enable efficient online learning. Next, a technique to co-optimize the accuracy and active time of wearable applications by utilizing multiple design points with different energy-accuracy trade-offs is presented. The proposed technique switches between the design points at runtime to maximize a generalized objective function under tight harvested energy budget constraints. Finally, we present the first ultra-low-energy hardware accelerator that makes it practical to perform HAR on energy harvested from wearable devices. The accelerator consumes 22.4 microjoules per operation using a commercial 65 nm technology. In summary, the solutions presented in this dissertation can enable the wider adoption of wearable devices.
ContributorsBhat, Ganapati (Author) / Ogras, Umit Y. (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Nedić, Angelia (Committee member) / Marculescu, Radu (Committee member) / Arizona State University (Publisher)
Created2020