Theses and Dissertations
Displaying 1 - 3 of 3
Filtering by
- Creators: Turaga, Pavan
Description
With robots being used extensively in various areas, a certain degree of robot autonomy has always been found desirable. In applications like planetary exploration, autonomous path planning and navigation are considered essential. But every now and then, a need to modify the robot's operation arises, a need for a human to provide it some supervisory parameters that modify the degree of autonomy or allocate extra tasks to the robot. In this regard, this thesis presents an approach to include a provision to accept and incorporate such human inputs and modify the navigation functions of the robot accordingly. Concepts such as applying kinematical constraints while planning paths, traversing of unknown areas with an intent of maximizing field of view, performing complex tasks on command etc. have been examined and implemented. The approaches have been tested in Robot Operating System (ROS), using robots such as the iRobot Create, Personal Robotics (PR2) etc. Simulations and experimental demonstrations have proved that this approach is feasible for solving some of the existing problems and that it certainly can pave way to further research for enhancing functionality.
ContributorsVemprala, Sai Hemachandra (Author) / Saripalli, Srikanth (Thesis advisor) / Fainekos, Georgios (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2013
Description
Speech is generated by articulators acting on
a phonatory source. Identification of this
phonatory source and articulatory geometry are
individually challenging and ill-posed
problems, called speech separation and
articulatory inversion, respectively.
There exists a trade-off
between decomposition and recovered
articulatory geometry due to multiple
possible mappings between an
articulatory configuration
and the speech produced. However, if measurements
are obtained only from a microphone sensor,
they lack any invasive insight and add
additional challenge to an already difficult
problem.
A joint non-invasive estimation
strategy that couples articulatory and
phonatory knowledge would lead to better
articulatory speech synthesis. In this thesis,
a joint estimation strategy for speech
separation and articulatory geometry recovery
is studied. Unlike previous
periodic/aperiodic decomposition methods that
use stationary speech models within a
frame, the proposed model presents a
non-stationary speech decomposition method.
A parametric glottal source model and an
articulatory vocal tract response are
represented in a dynamic state space formulation.
The unknown parameters of the
speech generation components are estimated
using sequential Monte Carlo methods
under some specific assumptions.
The proposed approach is compared with other
glottal inverse filtering methods,
including iterative adaptive inverse filtering,
state-space inverse filtering, and
the quasi-closed phase method.
a phonatory source. Identification of this
phonatory source and articulatory geometry are
individually challenging and ill-posed
problems, called speech separation and
articulatory inversion, respectively.
There exists a trade-off
between decomposition and recovered
articulatory geometry due to multiple
possible mappings between an
articulatory configuration
and the speech produced. However, if measurements
are obtained only from a microphone sensor,
they lack any invasive insight and add
additional challenge to an already difficult
problem.
A joint non-invasive estimation
strategy that couples articulatory and
phonatory knowledge would lead to better
articulatory speech synthesis. In this thesis,
a joint estimation strategy for speech
separation and articulatory geometry recovery
is studied. Unlike previous
periodic/aperiodic decomposition methods that
use stationary speech models within a
frame, the proposed model presents a
non-stationary speech decomposition method.
A parametric glottal source model and an
articulatory vocal tract response are
represented in a dynamic state space formulation.
The unknown parameters of the
speech generation components are estimated
using sequential Monte Carlo methods
under some specific assumptions.
The proposed approach is compared with other
glottal inverse filtering methods,
including iterative adaptive inverse filtering,
state-space inverse filtering, and
the quasi-closed phase method.
ContributorsVenkataramani, Adarsh Akkshai (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Bliss, Daniel W (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2018
Description
Multi-sensor fusion is a fundamental problem in Robot Perception. For a robot to operate in a real world environment, multiple sensors are often needed. Thus, fusing data from various sensors accurately is vital for robot perception. In the first part of this thesis, the problem of fusing information from a LIDAR, a color camera and a thermal camera to build RGB-Depth-Thermal (RGBDT) maps is investigated. An algorithm that solves a non-linear optimization problem to compute the relative pose between the cameras and the LIDAR is presented. The relative pose estimate is then used to find the color and thermal texture of each LIDAR point. Next, the various sources of error that can cause the mis-coloring of a LIDAR point after the cross- calibration are identified. Theoretical analyses of these errors reveal that the coloring errors due to noisy LIDAR points, errors in the estimation of the camera matrix, and errors in the estimation of translation between the sensors disappear with distance. But errors in the estimation of the rotation between the sensors causes the coloring error to increase with distance.
On a robot (vehicle) with multiple sensors, sensor fusion algorithms allow us to represent the data in the vehicle frame. But data acquired temporally in the vehicle frame needs to be registered in a global frame to obtain a map of the environment. Mapping techniques involving the Iterative Closest Point (ICP) algorithm and the Normal Distributions Transform (NDT) assume that a good initial estimate of the transformation between the 3D scans is available. This restricts the ability to stitch maps that were acquired at different times. Mapping can become flexible if maps that were acquired temporally can be merged later. To this end, the second part of this thesis focuses on developing an automated algorithm that fuses two maps by finding a congruent set of five points forming a pyramid.
Mapping has various application domains beyond Robot Navigation. The third part of this thesis considers a unique application domain where the surface displace- ments caused by an earthquake are to be recovered using pre- and post-earthquake LIDAR data. A technique to recover the 3D surface displacements is developed and the results are presented on real earthquake datasets: El Mayur Cucupa earthquake, Mexico, 2010 and Fukushima earthquake, Japan, 2011.
On a robot (vehicle) with multiple sensors, sensor fusion algorithms allow us to represent the data in the vehicle frame. But data acquired temporally in the vehicle frame needs to be registered in a global frame to obtain a map of the environment. Mapping techniques involving the Iterative Closest Point (ICP) algorithm and the Normal Distributions Transform (NDT) assume that a good initial estimate of the transformation between the 3D scans is available. This restricts the ability to stitch maps that were acquired at different times. Mapping can become flexible if maps that were acquired temporally can be merged later. To this end, the second part of this thesis focuses on developing an automated algorithm that fuses two maps by finding a congruent set of five points forming a pyramid.
Mapping has various application domains beyond Robot Navigation. The third part of this thesis considers a unique application domain where the surface displace- ments caused by an earthquake are to be recovered using pre- and post-earthquake LIDAR data. A technique to recover the 3D surface displacements is developed and the results are presented on real earthquake datasets: El Mayur Cucupa earthquake, Mexico, 2010 and Fukushima earthquake, Japan, 2011.
ContributorsKrishnan, Aravindhan K (Author) / Saripalli, Srikanth (Thesis advisor) / Klesh, Andrew (Committee member) / Fainekos, Georgios (Committee member) / Thangavelautham, Jekan (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2016