Theses and Dissertations
This collection includes both ASU Theses and Dissertations, submitted by graduate students, and the Barrett, Honors College theses submitted by undergraduate students.
Displaying 1 - 3 of 3
Filtering by
- All Subjects: Signal processing--Digital techniques.
Description
Adaptive processing and classification of electrocardiogram (ECG) signals are important in eliminating the strenuous process of manually annotating ECG recordings for clinical use. Such algorithms require robust models whose parameters can adequately describe the ECG signals. Although different dynamic statistical models describing ECG signals currently exist, they depend considerably on a priori information and user-specified model parameters. Also, ECG beat morphologies, which vary greatly across patients and disease states, cannot be uniquely characterized by a single model. In this work, sequential Bayesian based methods are used to appropriately model and adaptively select the corresponding model parameters of ECG signals. An adaptive framework based on a sequential Bayesian tracking method is proposed to adaptively select the cardiac parameters that minimize the estimation error, thus precluding the need for pre-processing. Simulations using real ECG data from the online Physionet database demonstrate the improvement in performance of the proposed algorithm in accurately estimating critical heart disease parameters. In addition, two new approaches to ECG modeling are presented using the interacting multiple model and the sequential Markov chain Monte Carlo technique with adaptive model selection. Both these methods can adaptively choose between different models for various ECG beat morphologies without requiring prior ECG information, as demonstrated by using real ECG signals. A supervised Bayesian maximum-likelihood (ML) based classifier uses the estimated model parameters to classify different types of cardiac arrhythmias. However, the non-availability of sufficient amounts of representative training data and the large inter-patient variability pose a challenge to the existing supervised learning algorithms, resulting in a poor classification performance. In addition, recently developed unsupervised learning methods require a priori knowledge on the number of diseases to cluster the ECG data, which often evolves over time. In order to address these issues, an adaptive learning ECG classification method that uses Dirichlet process Gaussian mixture models is proposed. This approach does not place any restriction on the number of disease classes, nor does it require any training data. This algorithm is adapted to be patient-specific by labeling or identifying the generated mixtures using the Bayesian ML method, assuming the availability of labeled training data.
ContributorsEdla, Shwetha Reddy (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Kovvali, Narayan (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2012
Description
Tracking a time-varying number of targets is a challenging
dynamic state estimation problem whose complexity is intensified
under low signal-to-noise ratio (SNR) or high clutter conditions.
This is important, for example, when tracking
multiple, closely spaced targets moving in the same direction such as a
convoy of low observable vehicles moving through a forest or multiple
targets moving in a crisscross pattern. The SNR in
these applications is usually low as the reflected signals from
the targets are weak or the noise level is very high.
An effective approach for detecting and tracking a single target
under low SNR conditions is the track-before-detect filter (TBDF)
that uses unthresholded measurements. However, the TBDF has only been used to
track a small fixed number of targets at low SNR.
This work proposes a new multiple target TBDF approach to track a
dynamically varying number of targets under the recursive Bayesian framework.
For a given maximum number of
targets, the state estimates are obtained by estimating the joint
multiple target posterior probability density function under all possible
target
existence combinations. The estimation of the corresponding target existence
combination probabilities and the target existence probabilities are also
derived. A feasible sequential Monte Carlo (SMC) based implementation
algorithm is proposed. The approximation accuracy of the SMC
method with a reduced number of particles is improved by an efficient
proposal density function that partitions the multiple target space into a
single target space.
The proposed multiple target TBDF method is extended to track targets in sea
clutter using highly time-varying radar measurements. A generalized
likelihood function for closely spaced multiple targets in compound Gaussian
sea clutter is derived together with the maximum likelihood estimate of
the model parameters using an iterative fixed point algorithm.
The TBDF performance is improved by proposing a computationally feasible
method to estimate the space-time covariance matrix of rapidly-varying sea
clutter. The method applies the Kronecker product approximation to the
covariance matrix and uses particle filtering to solve the resulting dynamic
state space model formulation.
dynamic state estimation problem whose complexity is intensified
under low signal-to-noise ratio (SNR) or high clutter conditions.
This is important, for example, when tracking
multiple, closely spaced targets moving in the same direction such as a
convoy of low observable vehicles moving through a forest or multiple
targets moving in a crisscross pattern. The SNR in
these applications is usually low as the reflected signals from
the targets are weak or the noise level is very high.
An effective approach for detecting and tracking a single target
under low SNR conditions is the track-before-detect filter (TBDF)
that uses unthresholded measurements. However, the TBDF has only been used to
track a small fixed number of targets at low SNR.
This work proposes a new multiple target TBDF approach to track a
dynamically varying number of targets under the recursive Bayesian framework.
For a given maximum number of
targets, the state estimates are obtained by estimating the joint
multiple target posterior probability density function under all possible
target
existence combinations. The estimation of the corresponding target existence
combination probabilities and the target existence probabilities are also
derived. A feasible sequential Monte Carlo (SMC) based implementation
algorithm is proposed. The approximation accuracy of the SMC
method with a reduced number of particles is improved by an efficient
proposal density function that partitions the multiple target space into a
single target space.
The proposed multiple target TBDF method is extended to track targets in sea
clutter using highly time-varying radar measurements. A generalized
likelihood function for closely spaced multiple targets in compound Gaussian
sea clutter is derived together with the maximum likelihood estimate of
the model parameters using an iterative fixed point algorithm.
The TBDF performance is improved by proposing a computationally feasible
method to estimate the space-time covariance matrix of rapidly-varying sea
clutter. The method applies the Kronecker product approximation to the
covariance matrix and uses particle filtering to solve the resulting dynamic
state space model formulation.
ContributorsEbenezer, Samuel P (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Bliss, Daniel (Committee member) / Kovvali, Narayan (Committee member) / Arizona State University (Publisher)
Created2015
Description
Genomic and proteomic sequences, which are in the form of deoxyribonucleic acid (DNA) and amino acids respectively, play a vital role in the structure, function and diversity of every living cell. As a result, various genomic and proteomic sequence processing methods have been proposed from diverse disciplines, including biology, chemistry, physics, computer science and electrical engineering. In particular, signal processing techniques were applied to the problems of sequence querying and alignment, that compare and classify regions of similarity in the sequences based on their composition. However, although current approaches obtain results that can be attributed to key biological properties, they require pre-processing and lack robustness to sequence repetitions. In addition, these approaches do not provide much support for efficiently querying sub-sequences, a process that is essential for tracking localized database matches. In this work, a query-based alignment method for biological sequences that maps sequences to time-domain waveforms before processing the waveforms for alignment in the time-frequency plane is first proposed. The mapping uses waveforms, such as time-domain Gaussian functions, with unique sequence representations in the time-frequency plane. The proposed alignment method employs a robust querying algorithm that utilizes a time-frequency signal expansion whose basis function is matched to the basic waveform in the mapped sequences. The resulting WAVEQuery approach is demonstrated for both DNA and protein sequences using the matching pursuit decomposition as the signal basis expansion. The alignment localization of WAVEQuery is specifically evaluated over repetitive database segments, and operable in real-time without pre-processing. It is demonstrated that WAVEQuery significantly outperforms the biological sequence alignment method BLAST for queries with repetitive segments for DNA sequences. A generalized version of the WAVEQuery approach with the metaplectic transform is also described for protein sequence structure prediction. For protein alignment, it is often necessary to not only compare the one-dimensional (1-D) primary sequence structure but also the secondary and tertiary three-dimensional (3-D) space structures. This is done after considering the conformations in the 3-D space due to the degrees of freedom of these structures. As a result, a novel directionality based 3-D waveform mapping for the 3-D protein structures is also proposed and it is used to compare protein structures using a matched filter approach. By incorporating a 3-D time axis, a highly-localized Gaussian-windowed chirp waveform is defined, and the amino acid information is mapped to the chirp parameters that are then directly used to obtain directionality in the 3-D space. This mapping is unique in that additional characteristic protein information such as hydrophobicity, that relates the sequence with the structure, can be added as another representation parameter. The additional parameter helps tracking similarities over local segments of the structure, this enabling classification of distantly related proteins which have partial structural similarities. This approach is successfully tested for pairwise alignments over full length structures, alignments over multiple structures to form a phylogenetic trees, and also alignments over local segments. Also, basic classification over protein structural classes using directional descriptors for the protein structure is performed.
ContributorsRavichandran, Lakshminarayan (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Spanias, Andreas S (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Lacroix, Zoé (Committee member) / Arizona State University (Publisher)
Created2011