This collection includes both ASU Theses and Dissertations, submitted by graduate students, and the Barrett, Honors College theses submitted by undergraduate students. 

Displaying 1 - 10 of 556
Filtering by

Clear all filters

149992-Thumbnail Image.png
Description
Process variations have become increasingly important for scaled technologies starting at 45nm. The increased variations are primarily due to random dopant fluctuations, line-edge roughness and oxide thickness fluctuation. These variations greatly impact all aspects of circuit performance and pose a grand challenge to future robust IC design. To improve robustness,

Process variations have become increasingly important for scaled technologies starting at 45nm. The increased variations are primarily due to random dopant fluctuations, line-edge roughness and oxide thickness fluctuation. These variations greatly impact all aspects of circuit performance and pose a grand challenge to future robust IC design. To improve robustness, efficient methodology is required that considers effect of variations in the design flow. Analyzing timing variability of complex circuits with HSPICE simulations is very time consuming. This thesis proposes an analytical model to predict variability in CMOS circuits that is quick and accurate. There are several analytical models to estimate nominal delay performance but very little work has been done to accurately model delay variability. The proposed model is comprehensive and estimates nominal delay and variability as a function of transistor width, load capacitance and transition time. First, models are developed for library gates and the accuracy of the models is verified with HSPICE simulations for 45nm and 32nm technology nodes. The difference between predicted and simulated σ/μ for the library gates is less than 1%. Next, the accuracy of the model for nominal delay is verified for larger circuits including ISCAS'85 benchmark circuits. The model predicted results are within 4% error of HSPICE simulated results and take a small fraction of the time, for 45nm technology. Delay variability is analyzed for various paths and it is observed that non-critical paths can become critical because of Vth variation. Variability on shortest paths show that rate of hold violations increase enormously with increasing Vth variation.
ContributorsGummalla, Samatha (Author) / Chakrabarti, Chaitali (Thesis advisor) / Cao, Yu (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Arizona State University (Publisher)
Created2011
149641-Thumbnail Image.png
Description
This study utilized symbolic interaction as a framework to examine the impact of mobility on four veteran elementary general music teachers' identities, roles, and perceptions of role support. Previous research has focused on teacher identity formation among preservice and novice teachers; veteran teachers are less frequently represented in the

This study utilized symbolic interaction as a framework to examine the impact of mobility on four veteran elementary general music teachers' identities, roles, and perceptions of role support. Previous research has focused on teacher identity formation among preservice and novice teachers; veteran teachers are less frequently represented in the literature. Teacher mobility research has focused on student achievement, teachers' reasons for moving, and teacher attrition. The impact of mobility on veteran teachers' identities, roles, and perceptions of role support has yet to be considered. A multiple case design was employed for this study. The criteria for purposeful selection of the participants were elementary general music teachers who had taught for at least ten years, who had changed teaching contracts and taught in at least two different schools, and who were viewed as effective music educators by fine arts coordinators. Data were collected over a period of eight months through semi-structured interviews, email correspondence, observations, review of videotapes of the participants' teaching in previous schools, and collection of artifacts. Data were analyzed within and across cases. The cross-case analysis revealed themes within the categories of identity, role, and role support for the participants. The findings suggest that the participants perceived their music teacher roles as multi-dimensional. They claimed their core identities remained stable over time; however, shifts in teacher identity occurred throughout their years as teachers. The participants asserted that mobility at the start of their careers had a positive impact because they each were challenged to solidify their own teacher identities and music teacher roles in varied school contexts. Mobility negatively impacted role and teacher practices during times when the participants adjusted to new school climates and role expectations. Role support varied depending upon school context, and the participants discovered active involvement in the school community was an effective means of seeking and acquiring role support. Reflection experiences in music teacher preparation programs, as well as mentoring and professional development geared toward teacher identity formation and role maturation, may assist teachers in matching their desired school context with their teacher identities and perceptions of the music teacher role.
ContributorsGray, Lori F (Author) / Stauffer, Sandra (Committee member) / Schmidt, Margaret (Committee member) / Sullivan, Jill (Committee member) / Bush, Jeffrey (Committee member) / Tobias, Evan (Committee member) / Arizona State University (Publisher)
Created2011
149645-Thumbnail Image.png
Description
Due to the growing concerns on the depletion of petroleum based energy resources and climate change; fuel cell technologies have received much attention in recent years. Proton exchange membrane fuel cell (PEMFCs) features high energy conversion efficiency and nearly zero greenhouse gas emissions, because of its combination of the hydrogen

Due to the growing concerns on the depletion of petroleum based energy resources and climate change; fuel cell technologies have received much attention in recent years. Proton exchange membrane fuel cell (PEMFCs) features high energy conversion efficiency and nearly zero greenhouse gas emissions, because of its combination of the hydrogen oxidation reaction (HOR) at anode side and oxygen reduction reaction (ORR) at cathode side. Synthesis of Pt nanoparticles supported on multi walled carbon nanotubes (MWCNTs) possess a highly durable electrochemical surface area (ESA) and show good power output on proton exchange membrane (PEM) fuel cell performance. Platinum on multi-walled carbon nanotubes (MWCNTs) support were synthesized by two different processes to transfer PtCl62- from aqueous to organic phase. While the first method of Pt/MWCNTs synthesis involved dodecane thiol (DDT) and octadecane thiol (ODT) as anchoring agent, the second method used ammonium lauryl sulfate (ALS) as the dispersion/anchoring agent. The particle size and distribution of platinum were examined by high-resolution transmission electron microscope (HRTEM). The TEM images showed homogenous distribution and uniform particle size of platinum deposited on the surface of MWCNTs. The single cell fuel cell performance of the Pt/MWCNTs synthesized thiols and ALS based electrode containing 0.2 (anode) and 0.4 mg (cathode) Pt.cm-2 were evaluated using Nafion-212 electrolyte with H2 and O2 gases at 80 oC and ambient pressure. The catalyst synthesis with ALS is relatively simple compared to that with thiols and also showed higher performance (power density reaches about 1070 mW.cm-2). The Electrodes with Pt/MWCNTs nanocatalysts synthesized using ALS were characterized by cyclic voltammetry (CV) for durability evaluation using humidified H2 and N2 gases at room temperature (21 oC) along with commercial Pt/C for comparison. The ESA measured by cyclic voltammetry between 0.15 and 1.2 V showed significant less degradation after 1000 cycles for ALS based Pt/MWCNTs.
ContributorsLiu, Xuan (Author) / Madakannan, Arunachalanadar (Thesis advisor) / Munukutla, Lakshmi (Committee member) / Tamizhmani, Govindasamy (Committee member) / Arizona State University (Publisher)
Created2011
149664-Thumbnail Image.png
Description
More than 30% of college entrants are placed in remedial mathematics (RM). Given that an explicit relationship exists between students' high school mathematics and college success in science, technology, engineering, and mathematical (STEM) fields, it is important to understand RM students' characteristics in high school. Using the Education Longitudinal Survey

More than 30% of college entrants are placed in remedial mathematics (RM). Given that an explicit relationship exists between students' high school mathematics and college success in science, technology, engineering, and mathematical (STEM) fields, it is important to understand RM students' characteristics in high school. Using the Education Longitudinal Survey 2002/2006 data, this study evaluated more than 130 variables for statistical and practical significance. The variables included standard demographic data, prior achievement and transcript data, family and teacher perceptions, school characteristics, and student attitudinal variables, all of which are identified as influential in mathematical success. These variables were analyzed using logistic regression models to estimate the likelihood that a student would be placed into RM. As might be expected, student test scores, highest mathematics course taken, and high school grade point average were the strongest predictors of success in college mathematics courses. Attitude variables had a marginal effect on the most advantaged students, but their effect cannot be evaluated for disadvantaged students, due to a non-random pattern of missing data. Further research should concentrate on obtaining answers to the attitudinal questions and investigating their influence and interaction with academic indicators.
ContributorsBarber, Rebecca (Author) / Garcia, David R. (Thesis advisor) / Powers, Jeanne (Committee member) / Rodrigue Mcintyre, Lisa (Committee member) / Arizona State University (Publisher)
Created2011
150343-Thumbnail Image.png
Description
In this work, a new method, "Nanobonding" [1,2] is conceived and researched to bond Si-based surfaces, via nucleation and growth of a 2 D silicon oxide SiOxHx interphase connecting the surfaces at the nanoscale across macroscopic domains. Nanobonding cross-bridges two smooth surfaces put into mechanical contact in an O2/H2O mixed

In this work, a new method, "Nanobonding" [1,2] is conceived and researched to bond Si-based surfaces, via nucleation and growth of a 2 D silicon oxide SiOxHx interphase connecting the surfaces at the nanoscale across macroscopic domains. Nanobonding cross-bridges two smooth surfaces put into mechanical contact in an O2/H2O mixed ambient below T <200 °C via arrays of SiOxHx molecules connecting into a continuous macroscopic bonding interphase. Nano-scale surface planarization via wet chemical processing and new spin technology are compared via Tapping Mode Atomic Force Microscopy (TMAFM) , before and after nano-bonding. Nanobonding uses precursor phases, 2D nano-films of beta-cristobalite (beta-c) SiO2, nucleated on Si(100) via the Herbots-Atluri (H-A) method [1]. beta-c SiO2 on Si(100) is ordered and flat with atomic terraces over 20 nm wide, well above 2 nm found in native oxides. When contacted with SiO2 this ultra-smooth nanophase can nucleate and grow domains with cross-bridging molecular strands of hydroxylated SiOx, instead of point contacts. The high density of molecular bonds across extended terraces forms a strong bond between Si-based substrates, nano- bonding [2] the Si and silica. A new model of beta-cristobalite SiO2 with its <110> axis aligned along Si[100] direction is simulated via ab-initio methods in a nano-bonded stack with beta-c SiO2 in contact with amorphous SiO2 (a-SiO2), modelling cross-bridging molecular bonds between beta-c SiO2 on Si(100) and a-SiO2 as during nanobonding. Computed total energies are compared with those found for Si(100) and a-SiO2 and show that the presence of two lattice cells of !-c SiO2 on Si(100) and a-SiO2 lowers energy when compared to Si(100)/ a-SiO2 Shadow cone calculations on three models of beta-c SiO2 on Si(100) are compared with Ion Beam Analysis of H-A processed Si(100). Total surface energy measurements via 3 liquid contact angle analysis of Si(100) after H-A method processing are also compared. By combining nanobonding experiments, TMAFM results, surface energy data, and ab-initio calculations, an atomistic model is derived and nanobonding is optimized. [1] US Patent 6,613,677 (9/2/03), 7,851,365 (12/14/10), [2] Patent Filed: 4/30/09, 10/1/2011
ContributorsWhaley, Shawn D (Author) / Culbertson, Robert J. (Thesis advisor) / Herbots, Nicole (Committee member) / Rez, Peter (Committee member) / Marzke, Robert F (Committee member) / Lindsay, Stuart (Committee member) / Chamberlin, Ralph V (Committee member) / Arizona State University (Publisher)
Created2011
150402-Thumbnail Image.png
Description
This thesis describes several experiments based on carbon nanotube nanofludic devices and field-effect transistors. The first experiment detected ion and molecule translocation through one single-walled carbon nanotube (SWCNT) that spans a barrier between two fluid reservoirs. The electrical ionic current is measured. Translocation of small single stranded DNA oligomers is

This thesis describes several experiments based on carbon nanotube nanofludic devices and field-effect transistors. The first experiment detected ion and molecule translocation through one single-walled carbon nanotube (SWCNT) that spans a barrier between two fluid reservoirs. The electrical ionic current is measured. Translocation of small single stranded DNA oligomers is marked by large transient increases in current through the tube and confirmed by a PCR (polymerase chain reaction) analysis. Carbon nanotubes simplify the construction of nanopores, permit new types of electrical measurement, and open new avenues for control of DNA translocation. The second experiment constructed devices in which the interior of a single-walled carbon nanotube field-effect transistor (CNT-FET) acts as a nanofluidic channel that connects two fluid reservoirs, permitting measurement of the electronic properties of the SWCNT as it is wetted by an analyte. Wetting of the inside of the SWCNT by water turns the transistor on, while wetting of the outside has little effect. This finding may provide a new method to investigate water behavior at nanoscale. This also opens a new avenue for building sensors in which the SWCNT functions as an electronic detector. This thesis also presents some experiments that related to nanofabrication, such as construction of FET with tin sulfide (SnS) quantum ribbon. This work demonstrates the application of solution processed IV-VI semiconductor nanostructures in nanoscale devices.
ContributorsCao, Zhai (Author) / Lindsay, Stuart (Thesis advisor) / Vaiana, Sara (Committee member) / Ros, Robert (Committee member) / Marzke, Robert (Committee member) / Shumway, John (Committee member) / Arizona State University (Publisher)
Created2011
Description

Many nanotechnology-related principles can be demonstrated in a way that is understandable for elementary school-aged children through at-home activity videos. As a part of a National Science Foundation funded grant, Dr. Qing Hua Wang’s research group at Arizona State University developed a nanotechnology-related activity website, Nano@Home, for students. In conjunction

Many nanotechnology-related principles can be demonstrated in a way that is understandable for elementary school-aged children through at-home activity videos. As a part of a National Science Foundation funded grant, Dr. Qing Hua Wang’s research group at Arizona State University developed a nanotechnology-related activity website, Nano@Home, for students. In conjunction with ASU’s virtual Open Door 2021, this creative project aimed to create activity videos based on the Nano@Home website to make the activities more interactive for students.

ContributorsOliver, Ruth Kaylyn (Author) / Wang, Qing Hua (Thesis director) / Krause, Stephen (Committee member) / Materials Science and Engineering Program (Contributor, Contributor) / Watts College of Public Service & Community Solut (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description

The PPP Loan Program was created by the CARES Act and carried out by the Small Business Administration (SBA) to provide support to small businesses in maintaining their payroll during the Coronavirus pandemic. This program was approved for $350 billion, but this amount was expanded by an additional $320 billion

The PPP Loan Program was created by the CARES Act and carried out by the Small Business Administration (SBA) to provide support to small businesses in maintaining their payroll during the Coronavirus pandemic. This program was approved for $350 billion, but this amount was expanded by an additional $320 billion to meet the demand by struggling businesses, since initial funding was exhausted under two weeks.<br/><br/>Significant controversy surrounds the program. In December 2020, the Department of Justice reported 90 individuals were charged for fraudulent use of funds, totaling $250 million. The loans, which were intended for small business, were actually approved for 450 public companies. Furthermore, the methods of approval are<br/>shrouded in mystery. In an effort to be transparent, the SBA has released information about loan recipients. Conveniently, the SBA has released information of all recipients. Detailed information was released for 661,218 recipients who have received a PPP loan in excess of $150,000. These recipients are the central point of this research.<br/><br/>This research sought to answer two primary questions: how did the SBA determine which loans, and therefore which industries are approved, and did the industries most affected by the pandemic receive the most in PPP loans, as intended by Congress? It was determined that, generally, PPP Loans were approved on the basis of employment percentages relative to the individual state. Furthermore, in general, the loans approved were approved fairly, with respect to the size of the industry. The loans, when adjusted for GDP and Employment factors, yielded a clear ranking that prioritized vulnerable industries first.<br/><br/>However, significant questions remain. The effectiveness of the PPP has been hindered by unclear incentives and negative outcomes, characterized by a government program that has essentially been rushed into service. Furthermore, limitations of available data to regress and compare the SBA's approved loans are not representative of small business.

ContributorsMaglanoc, Julian (Author) / Kenchington, David (Thesis director) / Cassidy, Nancy (Committee member) / Department of Finance (Contributor) / Dean, W.P. Carey School of Business (Contributor) / School of Accountancy (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description

The Covid-19 pandemic has made a significant impact on both the stock market and the<br/>global economy. The resulting volatility in stock prices has provided an opportunity to examine<br/>the Efficient Market Hypothesis. This study aims to gain insights into the efficiency of markets<br/>based on stock price performance in the Covid era.

The Covid-19 pandemic has made a significant impact on both the stock market and the<br/>global economy. The resulting volatility in stock prices has provided an opportunity to examine<br/>the Efficient Market Hypothesis. This study aims to gain insights into the efficiency of markets<br/>based on stock price performance in the Covid era. Specifically, it investigates the market’s<br/>ability to anticipate significant events during the Covid-19 timeline beginning November 1, 2019<br/><br/>and ending March 31, 2021. To examine the efficiency of markets, our team created a Stay-at-<br/>Home Portfolio, experiencing economic tailwinds from the Covid lockdowns, and a Pandemic<br/><br/>Loser Portfolio, experiencing economic headwinds from the Covid lockdowns. Cumulative<br/>returns of each portfolio are benchmarked to the cumulative returns of the S&P 500. The results<br/>showed that the Efficient Market Hypothesis is likely to be valid, although a definitive<br/>conclusion cannot be made based on the scope of the analysis. There are recommendations for<br/>further research surrounding key events that may be able to draw a more direct conclusion.

ContributorsBrock, Matt Ian (Co-author) / Beneduce, Trevor (Co-author) / Craig, Nicko (Co-author) / Hertzel, Michael (Thesis director) / Mindlin, Jeff (Committee member) / Department of Finance (Contributor) / Economics Program in CLAS (Contributor) / WPC Graduate Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147956-Thumbnail Image.png
Description

Music streaming services have affected the music industry from both a financial and legal standpoint. Their current business model affects stakeholders such as artists, users, and investors. These services have been scrutinized recently for their imperfect royalty distribution model. Covid-19 has made these discussions even more relevant as touring income

Music streaming services have affected the music industry from both a financial and legal standpoint. Their current business model affects stakeholders such as artists, users, and investors. These services have been scrutinized recently for their imperfect royalty distribution model. Covid-19 has made these discussions even more relevant as touring income has come to a halt for musicians and the live entertainment industry. <br/>Under the current per-stream model, it is becoming exceedingly hard for artists to make a living off of streams. This forces artists to tour heavily as well as cut corners to create what is essentially “disposable art”. Rapidly releasing multiple projects a year has become the norm for many modern artists. This paper will examine the licensing framework, royalty payout issues, and propose a solution.

ContributorsKoudssi, Zakaria Corley (Author) / Sadusky, Brian (Thesis director) / Koretz, Lora (Committee member) / Dean, W.P. Carey School of Business (Contributor) / Department of Finance (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05