Theses and Dissertations
Displaying 1 - 4 of 4
Filtering by
- All Subjects: Electrical Engineering
Description
To achieve the ambitious long-term goal of a feet of cooperating Flexible Autonomous
Machines operating in an uncertain Environment (FAME), this thesis addresses several
critical modeling, design, control objectives for rear-wheel drive ground vehicles.
Toward this ambitious goal, several critical objectives are addressed. One central objective of the thesis was to show how to build low-cost multi-capability robot platform
that can be used for conducting FAME research.
A TFC-KIT car chassis was augmented to provide a suite of substantive capabilities.
The augmented vehicle (FreeSLAM Robot) costs less than $500 but offers the capability
of commercially available vehicles costing over $2000.
All demonstrations presented involve rear-wheel drive FreeSLAM robot. The following
summarizes the key hardware demonstrations presented and analyzed:
(1)Cruise (v, ) control along a line,
(2) Cruise (v, ) control along a curve,
(3) Planar (x, y) Cartesian Stabilization for rear wheel drive vehicle,
(4) Finish the track with camera pan tilt structure in minimum time,
(5) Finish the track without camera pan tilt structure in minimum time,
(6) Vision based tracking performance with different cruise speed vx,
(7) Vision based tracking performance with different camera fixed look-ahead distance L,
(8) Vision based tracking performance with different delay Td from vision subsystem,
(9) Manually remote controlled robot to perform indoor SLAM,
(10) Autonomously line guided robot to perform indoor SLAM.
For most cases, hardware data is compared with, and corroborated by, model based
simulation data. In short, the thesis uses low-cost self-designed rear-wheel
drive robot to demonstrate many capabilities that are critical in order to reach the
longer-term FAME goal.
Machines operating in an uncertain Environment (FAME), this thesis addresses several
critical modeling, design, control objectives for rear-wheel drive ground vehicles.
Toward this ambitious goal, several critical objectives are addressed. One central objective of the thesis was to show how to build low-cost multi-capability robot platform
that can be used for conducting FAME research.
A TFC-KIT car chassis was augmented to provide a suite of substantive capabilities.
The augmented vehicle (FreeSLAM Robot) costs less than $500 but offers the capability
of commercially available vehicles costing over $2000.
All demonstrations presented involve rear-wheel drive FreeSLAM robot. The following
summarizes the key hardware demonstrations presented and analyzed:
(1)Cruise (v, ) control along a line,
(2) Cruise (v, ) control along a curve,
(3) Planar (x, y) Cartesian Stabilization for rear wheel drive vehicle,
(4) Finish the track with camera pan tilt structure in minimum time,
(5) Finish the track without camera pan tilt structure in minimum time,
(6) Vision based tracking performance with different cruise speed vx,
(7) Vision based tracking performance with different camera fixed look-ahead distance L,
(8) Vision based tracking performance with different delay Td from vision subsystem,
(9) Manually remote controlled robot to perform indoor SLAM,
(10) Autonomously line guided robot to perform indoor SLAM.
For most cases, hardware data is compared with, and corroborated by, model based
simulation data. In short, the thesis uses low-cost self-designed rear-wheel
drive robot to demonstrate many capabilities that are critical in order to reach the
longer-term FAME goal.
ContributorsLu, Xianglong (Author) / Rodriguez, Armando Antonio (Thesis advisor) / Berman, Spring (Committee member) / Artemiadis, Panagiotis (Committee member) / Arizona State University (Publisher)
Created2016
Description
This thesis presents a study on the user adaptive variable impedance control of a wearable ankle robot for robot-aided rehabilitation with a primary focus on enhancing accuracy and speed. The controller adjusts the impedance parameters based on the user's kinematic data to provide personalized assistance. Bayesian optimization is employed to minimize an objective function formulated from the user's kinematic data to adapt the impedance parameters per user, thereby enhancing speed and accuracy. Gaussian process is used as a surrogate model for optimization to account for uncertainties and outliers inherent to human experiments. Student-t process based outlier detection is utilized to enhance optimization robustness and accuracy. The efficacy of the optimization is evaluated based on measures of speed, accuracy, and effort, and compared with an untuned variable impedance controller during 2D curved trajectory following tasks. User effort was measured based on muscle activation data from the tibialis anterior, peroneus longus, soleus, and gastrocnemius muscles. The optimized controller was evaluated on 15 healthy subjects and demonstrated an average increase in speed of 9.85% and a decrease in deviation from the ideal trajectory of 7.57%, compared to an unoptimized variable impedance controller. The strategy also reduced the time to complete tasks by 6.57%, while maintaining a similar level of user effort.
ContributorsManoharan, Gautham (Author) / Lee, Hyunglae (Thesis advisor) / Berman, Spring (Committee member) / Xu, Zhe (Committee member) / Arizona State University (Publisher)
Created2023
Description
For the last 50 years, oscillator modeling in ranging systems has received considerable
attention. Many components in a navigation system, such as the master oscillator
driving the receiver system, as well the master oscillator in the transmitting system
contribute significantly to timing errors. Algorithms in the navigation processor must
be able to predict and compensate such errors to achieve a specified accuracy. While
much work has been done on the fundamentals of these problems, the thinking on said
problems has not progressed. On the hardware end, the designers of local oscillators
focus on synthesized frequency and loop noise bandwidth. This does nothing to
mitigate, or reduce frequency stability degradation in band. Similarly, there are not
systematic methods to accommodate phase and frequency anomalies such as clock
jumps. Phase locked loops are fundamentally control systems, and while control
theory has had significant advancement over the last 30 years, the design of timekeeping
sources has not advanced beyond classical control. On the software end,
single or two state oscillator models are typically embedded in a Kalman Filter to
alleviate time errors between the transmitter and receiver clock. Such models are
appropriate for short term time accuracy, but insufficient for long term time accuracy.
Additionally, flicker frequency noise may be present in oscillators, and it presents
mathematical modeling complications. This work proposes novel H∞ control methods
to address the shortcomings in the standard design of time-keeping phase locked loops.
Such methods allow the designer to address frequency stability degradation as well
as high phase/frequency dynamics. Additionally, finite-dimensional approximants of
flicker frequency noise that are more representative of the truth system than the
tradition Gauss Markov approach are derived. Last, to maintain timing accuracy in
a wide variety of operating environments, novel Banks of Adaptive Extended Kalman
Filters are used to address both stochastic and dynamic uncertainty.
attention. Many components in a navigation system, such as the master oscillator
driving the receiver system, as well the master oscillator in the transmitting system
contribute significantly to timing errors. Algorithms in the navigation processor must
be able to predict and compensate such errors to achieve a specified accuracy. While
much work has been done on the fundamentals of these problems, the thinking on said
problems has not progressed. On the hardware end, the designers of local oscillators
focus on synthesized frequency and loop noise bandwidth. This does nothing to
mitigate, or reduce frequency stability degradation in band. Similarly, there are not
systematic methods to accommodate phase and frequency anomalies such as clock
jumps. Phase locked loops are fundamentally control systems, and while control
theory has had significant advancement over the last 30 years, the design of timekeeping
sources has not advanced beyond classical control. On the software end,
single or two state oscillator models are typically embedded in a Kalman Filter to
alleviate time errors between the transmitter and receiver clock. Such models are
appropriate for short term time accuracy, but insufficient for long term time accuracy.
Additionally, flicker frequency noise may be present in oscillators, and it presents
mathematical modeling complications. This work proposes novel H∞ control methods
to address the shortcomings in the standard design of time-keeping phase locked loops.
Such methods allow the designer to address frequency stability degradation as well
as high phase/frequency dynamics. Additionally, finite-dimensional approximants of
flicker frequency noise that are more representative of the truth system than the
tradition Gauss Markov approach are derived. Last, to maintain timing accuracy in
a wide variety of operating environments, novel Banks of Adaptive Extended Kalman
Filters are used to address both stochastic and dynamic uncertainty.
ContributorsEchols, Justin A (Author) / Bliss, Daniel W (Thesis advisor) / Tsakalis, Konstantinos S (Committee member) / Berman, Spring (Committee member) / Mittelmann, Hans (Committee member) / Arizona State University (Publisher)
Created2020
Description
Over the past few decades, there is an increase in demand for various ground robot applications such as warehouse management, surveillance, mapping, infrastructure inspection, etc. This steady increase in demand has led to a significant rise in the nonholonomic differential drive vehicles (DDV) research. Albeit extensive work has been done in developing various control laws for trajectory tracking, point stabilization, formation control, etc., there are still problems and critical questions in regards to design, modeling, and control of DDV’s - that need to be adequately addressed. In this thesis, three different dynamical models are considered that are formed by varying the input/output parameters of the DDV model. These models are analyzed to understand their stability, bandwidth, input-output coupling, and control design properties. Furthermore, a systematic approach has been presented to show the impact of design parameters such as mass, inertia, radius of the wheels, and center of gravity location on the dynamic and inner-loop (speed) control design properties. Subsequently, extensive simulation and hardware trade studies have been conductedto quantify the impact of design parameters and modeling variations on the performance of outer-loop cruise and position control (along a curve). In addition to this, detailed guidelines are provided for when a multi-input multi-output (MIMO) control strategy is advisable over a single-input single-output (SISO) control strategy; when a less stable plant is preferable over a more stable one in order to accommodate performance specifications. Additionally, a multi-robot trajectory tracking implementation based on receding horizon optimization approach is also presented. In most of the optimization-based trajectory tracking approaches found in the literature, only the constraints imposed by the kinematic model are incorporated into the problem. This thesis elaborates the fundamental problem associated with these methods and presents a systematic approach to understand and quantify when kinematic model based constraints are sufficient and when dynamic model-based constraints are necessary to obtain good tracking properties. Detailed instructions are given for designing and building the DDV based on performance specifications, and also, an open-source platform capable of handling high-speed multi-robot research is developed in C++.
ContributorsManne, Sai Sravan (Author) / Rodriguez, Armando A (Thesis advisor) / Si, Jennie (Committee member) / Berman, Spring (Committee member) / Arizona State University (Publisher)
Created2021