ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Although HTTP is the most reliable and consistent data transfer protocol for such interactions, the most important underlying challenge with such platforms is the performance based on power consumption and latency in data transfer.
In the scope of this thesis, two applications using CGI and WebRTC for data transfer over HTTP will be presented and the power consumption by the peripherals in transmitting the data and the possible implications for those will be discussed.
In this dissertation, a linear-switch mode hybrid ET supply modulator utilizing adaptive biasing and gain enhanced current mirror operational transconductance amplifier (OTA) with class-AB output stage in parallel with a switching regulator is presented. In comparison to a conventional OTA design with similar quiescent current consumption, proposed approach improves positive and negative slew rate from 50 V/µs to 93.4 V/µs and -87 V/µs to -152.5 V/µs respectively, dc gain from 45 dB to 67 dB while consuming same amount of quiescent current. The proposed hybrid supply modulator achieves 83% peak efficiency, power added efficiency (PAE) of 42.3% at 26.2 dBm for a 10 MHz 7.24 dB peak-to-average power ratio (PAPR) LTE signal and improves PAE by 8% at 6 dB back off from 26.2 dBm power amplifier (PA) output power with respect to fixed supply. With a 10 MHz 7.24 dB PAPR QPSK LTE signal the ET PA system achieves adjacent channel leakage ratio (ACLR) of -37.7 dBc and error vector magnitude (EVM) of 4.5% at 26.2 dBm PA output power, while with a 10 MHz 8.15 dB PAPR 64QAM LTE signal the ET PA system achieves ACLR of -35.6 dBc and EVM of 6% at 26 dBm PA output power without digital pre-distortion (DPD). The proposed supply modulator core circuit occupies 1.1 mm2 die area, and is fabricated in a 0.18 µm CMOS technology.
Time-interleaving increases the effective data conversion rate in ADCs while keeping the circuit requirements the same. However, this technique needs special considerations as other design issues associated with using parallel identical channels emerge. The first and the most important is the practical issue of timing mismatch between channels, also called sample-time error, which can directly affect the performance of the ADC. Many techniques have been developed to tackle this issue both in analog and digital domains. Most of these techniques have high complexities especially when the number of channels exceeds 2 and some of them are only valid when input signal is a single tone sinusoidal which limits the application.
This dissertation proposes a sample-time error calibration technique which bests the previous techniques in terms of simplicity, and also could be used with arbitrary input signals. A 12-bit 650 MSPS pipeline ADC with 1.5 GHz analog bandwidth for digital beam forming systems is designed in IBM 8HP BiCMOS 130 nm technology. A front-end sample-and-hold amplifier (SHA) was also designed to compare with an SHA-less design in terms of performance, power and area. Simulation results show that the proposed technique is able to improve the SNDR by 20 dB for a mismatch of 50% of the sampling period and up to 29 dB at 37% of the Nyquist frequency. The designed ADC consumes 122 mW in each channel and the clock generation circuit consumes 142 mW. The ADC achieves 68.4 dB SNDR for an input of 61 MHz.
(WVSNs) critically depends on the resources of the nodes forming the sensor
networks. In the era of big data, Internet of Things (IoT), and distributed
demand and solutions, there is a need for multi-dimensional data to be part of
the Sensor Network data that is easily accessible and consumable by humanity as
well as machinery. Images and video are expected to become as ubiquitous as is
the scalar data in traditional sensor networks. The inception of video-streaming
over the Internet, heralded a relentless research for effective ways of
distributing video in a scalable and cost effective way. There has been novel
implementation attempts across several network layers. Due to the inherent
complications of backward compatibility and need for standardization across
network layers, there has been a refocused attention to address most of the
video distribution over the application layer. As a result, a few video
streaming solutions over the Hypertext Transfer Protocol (HTTP) have been
proposed. Most notable are Apple’s HTTP Live Streaming (HLS) and the Motion
Picture Experts Groups Dynamic Adaptive Streaming over HTTP (MPEG-DASH). These
frameworks, do not address the typical and future WVSN use cases. A highly
flexible Wireless Video Sensor Network Platform and compatible DASH (WVSNP-DASH)
are introduced. The platform's goal is to usher video as a data element that
can be integrated into traditional and non-Internet networks. A low cost,
scalable node is built from the ground up to be fully compatible with the
Internet of Things Machine to Machine (M2M) concept, as well as the ability to
be easily re-targeted to new applications in a short time. Flexi-WVSNP design
includes a multi-radio node, a middle-ware for sensor operation and
communication, a cross platform client facing data retriever/player framework,
scalable security as well as a cohesive but decoupled hardware and software
design.