Barrett, The Honors College Thesis/Creative Project Collection
Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.
Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.
Much of Nepal lacks access to clean drinking water, and many water sources are contaminated with arsenic at concentrations above both World Health Organization and local Nepalese guidelines. While many water treatment technologies exist, it is necessary to identify those that are easily implementable in developing areas. One simple treatment that has gained popularity is biochar—a porous, carbon-based substance produced through pyrolysis of biomass in an oxygen-free environment. Arizona State University’s Engineering Projects in Community Service (EPICS) has partnered with communities in Nepal in an attempt to increase biochar production in the area, as it has several valuable applications including water treatment. Biochar’s arsenic adsorption capability will be investigated in this project with the goal of using the biochar that Nepalese communities produce to remove water contaminants. It has been found in scientific literature that biochar is effective in removing heavy metal contaminants from water with the addition of iron through surface activation. Thus, the specific goal of this research was to compare the arsenic adsorption disparity between raw biochar and iron-impregnated biochar. It was hypothesized that after numerous bed volumes pass through a water treatment column, iron from the source water will accumulate on the surface of raw biochar, mimicking the intentionally iron-impregnated biochar and further increasing contaminant uptake. It is thus an additional goal of this project to compare biochar loaded with iron through an iron-spiked water column and biochar impregnated with iron through surface oxidation. For this investigation, the biochar was crushed and sieved to a size between 90 and 100 micrometers. Two samples were prepared: raw biochar and oxidized biochar. The oxidized biochar was impregnated with iron through surface oxidation with potassium permanganate and iron loading. Then, X-ray fluorescence was used to compare the composition of the oxidized biochar with its raw counterpart, indicating approximately 0.5% iron in the raw and 1% iron in the oxidized biochar. The biochar samples were then added to batches of arsenic-spiked water at iron to arsenic concentration ratios of 20 mg/L:1 mg/L and 50 mg/L:1 mg/L to determine adsorption efficiency. Inductively coupled plasma mass spectrometry (ICP-MS) analysis indicated an 86% removal of arsenic using a 50:1 ratio of iron to arsenic (1.25 g biochar required in 40 mL solution), and 75% removal with a 20:1 ratio (0.5 g biochar required in 40 mL solution). Additional samples were then inserted into a column process apparatus for further adsorption analysis. Again, ICP-MS analysis was performed and the results showed that while both raw and treated biochars were capable of adsorbing arsenic, they were exhausted after less than 70 bed volumes (234 mL), with raw biochar lasting 60 bed volumes (201 mL) and oxidized about 70 bed volumes (234 mL). Further research should be conducted to investigate more affordable and less laboratory-intensive processes to prepare biochar for water treatment.
3D printing prosthetics for amputees is an innovative opportunity to provide a lower cost and customized alternative to current technologies. Companies, such as E-NABLE and YouBionic are developing myoelectric prosthetics, electrically powered terminal devices activated by electromyography (EMG), for transradial amputees. Prosthetics that are 3D printed are less expensive for juvenile use, more sustainable, and more accessible for those without insurance. Although they are typically not outfitted with the same complex grip patterns or durability of a traditional myoelectric prosthetic, they offer a sufficient durability (withstanding up to 150 N on average) and allow for new opportunities in prosthetic development. Devils Prosthetics, a student research and development group associated with Engineering Projects in Community Service (EPICS), has investigated the benefits and pitfalls of utilizing polyethylene terephthalate glycol (PETG) for 3D printing prosthetics as well as combining a MyoWare EMG sensor with machine learning for optimal control of the prosthetic.
The EPICS program, an acronym for Engineering Projects in Community Service, provides students an opportunity to create engineering solutions to “real world” problems. This honors thesis project is a collaboration with the EPICS program, the Vietnam Smart Agriculture EPICS team, and the Da Nang University of Technology (DUT) in Da Nang, Vietnam. The goal of the Vietnam Smart Agriculture EPICS team is to design an accessible system to reduce water consumption for Vietnamese small farmers through the use of smart agriculture technology. In January of 2023, my EPICS team and I were able to travel and interview five farmers in the Tra Que Farm to complete a needs assessment. The focus of this thesis project is to provide background research and to complete a feasibility study to aid the Vietnam Smart Agriculture EPICS team in developing a smart agriculture device to aid small farmers with overwatering. The thesis includes a literature review investigating solutions for evaluating the water needs of crops, delves into insights gathered from interviews with Vietnamese small farmers, and data collected from their farms.
3D printing prosthetics for amputees is an innovative opportunity to provide a lower cost and customized alternative to current technologies. Companies, such as E-NABLE and YouBionic are developing myoelectric prosthetics, electrically powered terminal devices activated by electromyography (EMG), for transradial amputees. Prosthetics that are 3D printed are less expensive for juvenile use, more sustainable, and more accessible for those without insurance. Although they are typically not outfitted with the same complex grip patterns or durability of a traditional myoelectric prosthetic, they offer a sufficient durability (withstanding up to 150 N on average) and allow for new opportunities in prosthetic development. Devils Prosthetics, a student research and development group associated with Engineering Projects in Community Service (EPICS), has investigated the benefits and pitfalls of utilizing polyethylene terephthalate glycol (PETG) for 3D printing prosthetics as well as combining a MyoWare EMG sensor with machine learning for optimal control of the prosthetic.
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
3D printing prosthetics for amputees is an innovative opportunity to provide a lower cost and customized alternative to current technologies. Companies, such as E-NABLE and YouBionic are developing myoelectric prosthetics, electrically powered terminal devices activated by electromyography (EMG), for transradial amputees. Prosthetics that are 3D printed are less expensive for juvenile use, more sustainable, and more accessible for those without insurance. Although they are typically not outfitted with the same complex grip patterns or durability of a traditional myoelectric prosthetic, they offer a sufficient durability (withstanding up to 150 N on average) and allow for new opportunities in prosthetic development. Devils Prosthetics, a student research and development group associated with Engineering Projects in Community Service (EPICS), has investigated the benefits and pitfalls of utilizing polyethylene terephthalate glycol (PETG) for 3D printing prosthetics as well as combining a MyoWare EMG sensor with machine learning for optimal control of the prosthetic.
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
In this thesis report, I aim to explain the realities of humanitarian efforts to implement solar panel systems in rural communities, the challenges they face, and why they fail. I will also compare case studies of both unsuccessful and successful projects, which will lead to a proposed solar panel system design for a single home completed in collaboration with Arizona State University's Engineering Projects in Community Service (EPICS) Program for the Shonto Solar project.