Barrett, The Honors College Thesis/Creative Project Collection
Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.
Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.
Displaying 1 - 10 of 32
Description
Breast microcalcifications are a potential indicator of cancerous tumors. Current visualization methods are either uncomfortable or impractical. Impedance measurement studies have been performed, but not in a clinical setting due to a low sensitivity and specificity. We are hoping to overcome this challenge with the development of a highly accurate impedance probe on a biopsy needle. With this technique, microcalcifications and the surrounding tissue could be differentiated in an efficient and comfortable manner than current techniques for biopsy procedures. We have developed and tested a functioning prototype for a biopsy needle using bioimpedance sensors to detect microcalcifications in the human body. In the final prototype a waveform generator sends a sin wave at a relatively low frequency(<1KHz) into the pre-amplifier, which both stabilizes and amplifies the signal. A modified howland bridge is then used to achieve a steady AC current through the electrodes. The voltage difference across the electrodes is then used to calculate the impedance being experienced between the electrodes. In our testing, the microcalcifications we are looking for have a noticeably higher impedance than the surrounding breast tissue, this spike in impedance is used to signal the presence of the calcifications, which are then sampled for examination by radiology.
ContributorsWen, Robert Bobby (Co-author) / Grula, Adam (Co-author) / Vergara, Marvin (Co-author) / Ramkumar, Shreya (Co-author) / Kozicki, Michael (Thesis director) / Ranjani, Kumaran (Committee member) / School of Molecular Sciences (Contributor) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
In competitive Taekwondo, Electronic Body Protectors (EBPs) are used to register hits made by players during sparring. EBPs are comprised of three main components: chest guard, foot sock, and headgear. This equipment interacts with each other through the use of magnets, electric sensors, transmitters, and a receiver. The receiver is connected to a computer programmed with software to process signals from the transmitter and determine whether or not a competitor scored a point. The current design of EBPs, however, have numerous shortcomings, including sensing false positives, failing to register hits, costing too much, and relying on human judgment. This thesis will thoroughly delineate the operation of the current EBPs used and discuss research performed in order to eliminate these weaknesses.
ContributorsSpell, Valerie Anne (Author) / Kozicki, Michael (Thesis director) / Kitchen, Jennifer (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Intrauterine devices (IUDs) have become one of the most common types of contraception in the United States. In the last decade, the American College of Obstetricians and Gynecologists, the World Health Organization, and the Food and Drug Administration (FDA) updated IUD recommendations to include placement in younger populations and nulliparous women. Research has shown that younger, nulliparous women may have smaller uterine dimensions and it is possible that larger IUDs are not suitable for those populations. This study retrospectively evaluated follow-up pelvic ultrasounds showing uterine dimensions and IUD positions of 57 women who had IUDs placed in a clinic. The largest IUD, the Paragard, showed a significantly higher rate of malpositioning than the Kyleena, Liletta, and Mirena IUDs. There is concern that the Paragard IUD, which is most commonly malpositioned, is also the IUD most dependent on position for adequate contraception. There was no correlation between uterine dimensions and IUD position at the time of analysis, however. Further data collection will continue in hopes that a larger sample size will reveal a parameter which affects IUD placement. Should further data analysis show that uterine width plays an important role in IUD position, the design for a device which can measure the width of patient's uterus (without the need for pelvic ultrasound) has been included. The concept generation for this measurement device includes laser measurements of uterine cavity width at different known lengths from the fundal wall, which output to an LED screen for recording.
ContributorsGrayson, Claire Elise (Co-author) / Kilgore, Brody (Co-author) / Reifsnider, Elizabeth (Thesis director) / Stabenfeldt, Sarah (Committee member) / Grayson, Robert (Committee member) / School of Molecular Sciences (Contributor) / Sanford School of Social and Family Dynamics (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Communication between the physical and digital world via software, embedded sensors and network connectivity is referred to by the term, the "Internet of Things" (IoT) [1]. The IoT transforms natural objects into "smart devices" to improve accuracy, reduce human intervention, and provide real-time data [1]. Smart weather stations that upload information, including temperature and humidity, to the Internet are already available. However, these products are often expensive and programmed only for single-purpose use. The LoRa Weather Station is a low cost, low power and low maintenance IoT solution that combines Microchip Technology's LoRa RN2903 module along with Mikroelektronika's Weather Click sensor. This report discusses how the LoRa Weather Station was created, primarily focusing on the LoRa gateway setup by a Raspberry Pi local web server. This project was completed by four electrical engineering students in the EEE 488 and 489 Senior Design courses at Arizona State University from Fall 2016 to Spring 2017. Total expenses for the project were $717.84, including the LoRa gateway which amounted to $104 (see Appendix C for the Bill of Materials).
ContributorsLeon, Miranda Cristina (Author) / Kozicki, Michael (Thesis director) / Balaban, Mehmet (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
In this project, an existing waveform generator designed by the vagus nerve stimulation (VNS) technology firm Hoolest Performance Technologies was modified and characterized. Voltage feedback and current feedback systems were designed in order to improve output voltage and current regulation. A wireless communication system was implemented onboard the newly designed waveform generator in order to improve user experience and allow the system to be controlled remotely. Finally, a custom printed circuit board was designed according to the established circuit schematics for the above components, and the layout was miniaturized to a total board footprint area of 1.5 square inches. The completed device was characterized according to several figures of merit including current consumption, voltage and current regulation, and short-circuit behavior.
ContributorsPatterson, John Michael (Author) / Kozicki, Michael (Thesis director) / Mian, Sami (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The period of time between birth and 24 months of age is a sensitive period for infant growth, and adequate nutrition is vitally important. In this study, 150 Mexican-American mother-and-child pairs (N = 300) were periodically surveyed over the course of 36 months for demographics, financial status, and feeding practices to understand the feeding methods of Mexican-American families and any relations they may have to the weight and growth of developing infants. Results found that formula feeding had higher rates of usage and duration than breastfeeding, while solid foods were largely introduced at the recommended ages. At one year of age, the infants were predisposed towards overweight and obesity with a high maternal BMI, suggesting that breastfeeding practices were not fully utilized. However, the data did not differentiate between formula and breast milk when both were used at any specific age, making it difficult to determine how long infants were exclusively breastfed and how that would impact their growth.
ContributorsCorsi, Marisa Kalani Nicole (Author) / Reifsnider, Elizabeth (Thesis director) / Thatcher, Craig (Committee member) / Arizona State University. College of Nursing & Healthcare Innovation (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This longitudinal research study addresses the correlations between infant feeding status in relation to infant temperament, maternal postpartum depression, and weight changes over time in a lower income, diverse population sample. The majority of participants were enrolled in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) in Mesa, Arizona. Each participant was recruited in their third trimester and followed for the infants' first six months of life. A series of four home visits were made in which demographic surveys, temperament questionnaires, postpartum depression scales, weight changes over time, fecal, vaginal, saliva, and breast milk samples were taken. Due to the extensive process of extracting and sequencing of the microbiome samples, data has yet to be collected from the fecal, vaginal, saliva, and breast milk samples and were not included in this study. Correlational and descriptive statistics were run on the qualitative data including various demographic questions, total temperament, depression, and healthy eating index scores. It was found that lower socioeconomic factors contributed to more difficult infant temperaments, mothers who breastfed had higher post-delivery postpartum depression scores, and mothers with healthier eating indexes formula or mixed fed their infants. The findings from this data will be compared to the incoming microbiome data to examine the role of the microbiome of mothers and infants and its effects on infant temperament, postpartum depression, and weight changes over time.
ContributorsWong, Lindsay Alissa (Author) / Reifsnider, Elizabeth (Thesis director) / Zheng, Lu (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This research will focus on identifying healthcare disparities among different groups of people in Maricopa County, with a focus on the Phoenix area. It takes form in a combination of a review of previously existing data, surveying pregnant women about their health insurance situations before their pregnancies, and surveying college students in Maricopa County about their past and current health insurance situations. The pregnant women who were interview were part of a study called Metabolism Tracking During Pregnancy through the School of Nutrition and Health Promotion at Arizona State University. College students who were interviewed were recruited online and all participants were choosing to respond. This research paper will focus on policies currently in place to try to address healthcare disparities and establishing the presence of healthcare disparities that are preexisting, and using individual responses from a small sample size of minorities and women to represent the larger Phoenix population. Differences in healthcare spending for different groups of people will also be analyzed in order to establish disparities present. This research is significant because if healthcare equality is the goal, then spending distribution to each should be proportional to the size of each subpopulation.
ContributorsGeiser, Rachel (Author) / Reifsnider, Elizabeth (Thesis director) / Cortese, Denis (Committee member) / School of Molecular Sciences (Contributor) / School of International Letters and Cultures (Contributor) / School of Politics and Global Studies (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The purpose of this secondary data-analysis was to explore the factors that predict a healthy birth outcome and a healthful postpartum weight for Mexican American mothers. There is a need to educate women who are overweight and obese that in order to have a healthier pregnancy and delivery they need to reduce their BMI. Demographic factors, the frequency of pregnancy complications, the weight and BMI of the mother, and Gestational Weight Gain were all factors investigated. These factors were investigated to determine parameters to obtain healthy birth weights in Mexican American infants.
ContributorsRemackel, Jacqueline Joy (Author) / Reifsnider, Elizabeth (Thesis director) / Zheng, Lu (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
With the progression of different industries moving away from employing secretaries for business professionals and professors, there exists a void in the area of personal assistance. This problem has existing solutions readily available to replace this service, i.e. secretary or personal assistant, tend to range from expensive and useful to inexpensive and not efficient. This leaves a low cost niche into the market of a virtual office assistant or manager to display messages and to help direct people in obtaining contact information. The development of a low cost solution revolves around the software needed to solve the various problems an accessible and user friendly Virtual Interface in which the owner of the Virtual Office Manager/Assistant can communicate to colleagues who are at standby outside of the owner's office and vice versa. This interface will be allowing the owner to describe the status pertaining to their absence or any other message sent to the interface. For example, the status of the owner's work commute can be described with a simple "Running Late" phrase or a message like "Busy come back in 10 minutes". In addition, any individual with an interest to these entries will have the opportunity to respond back because the device will provide contact information. When idle, the device will show supplemental information such as the owner's calendar and name. The scope of this will be the development and testing of solutions to achieve these goals.
ContributorsOffenberger, Spencer Eliot (Author) / Kozicki, Michael (Thesis director) / Goryll, Michael (Committee member) / Electrical Engineering Program (Contributor) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12