Barrett, The Honors College Thesis/Creative Project Collection
Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.
Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.
Displaying 1 - 10 of 267
Filtering by
- Creators: School of Geographical Sciences and Urban Planning
- Creators: Materials Science and Engineering Program
- Creators: Loebenberg, Abby
Description
The El Niño Southern Oscillation (ENSO) consists of a linkage between changes in sea-surface temperatures and atmospheric pressure across the Tropical Pacific. ENSO encompasses three phases: neutral events, warm/El Niño events in which sea-surface temperatures are warmer-than-normal and the pressure gradient decreases across the Equatorial Pacific, and cold/La Niña events in which Tropical Pacific sea-surface temperatures are cooler-than-normal and the pressure gradient increases. Previous studies have determined a connection between variations in ENSO phase and weather patterns across the globe, focusing particularly on surface temperature and precipitation patterns in the United States. However, little research exists that attempts to link changes in ENSO phase with severe weather in Arizona. Therefore, in this study, I analyzed how variations in ENSO phase affect the frequency, intensity, and spatial distribution of four types of severe weather from 1959 to 2016 in Arizona, including a) tornado events, b) severe thunderstorm wind events, c) hail events, and d) heavy rain and flash flood events. I collected data on the Oceanic Niño Index (ONI), a measure of ENSO, as well as storm reports for each severe weather phenomenon dating back to 1959. Then, I analyzed the frequency of each Arizona severe weather event type within each of the twelve annual months and over the entire study period. I also analyzed mean intensity values (Fujita/Enhanced Fujita Scale rating, path width, and path length for tornadoes; hail diameter in millimeters for hail; and wind gust speed for severe thunderstorm wind events) for each severe weather phenomenon, excluding the heavy rain and flash flood events. Finally, I used the Mean Center and Directional Distribution tools in ArcGIS to determine variations in the spatial distribution and mean centers between each ENSO phase for each severe weather event type. I found that ENSO phase, particularly La Niña, does impact the frequency and intensity of tornadoes, hail, thunderstorm wind, and heavy rain/flash flood events in Arizona. However, it appears that ENSO does not affect the spatial distribution of these Arizona severe weather phenomena. These findings attempt to fill in the gap in the literature and could help meteorologists better forecast changes in Arizona severe weather, in turn allowing Arizonans to better prepare for and mitigate the effects of severe weather across the state.
ContributorsGreenwood, Trey Austin (Author) / Cerveny, Randall (Thesis director) / Balling, Robert (Committee member) / School of Geographical Sciences and Urban Planning (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The vastly growing field of supercomputing is in dire need of a new measurement system to optimize JMRAM (Josephson junction magnetoresistive random access memory) devices. To effectively measure these devices, an ultra-low-noise, low cost cryogenic dipping probe with a dynamic voltage range is required. This dipping probe has been designed by ASU with <100 nVp-p noise, <10 nV offsets, 10 pV to 16 mV voltage range, and negligible thermoelectric drift. There is currently no other research group or company that can currently match both these low noise levels and wide voltage range. Two different dipping probes can be created with these specifications: one for high-use applications and one for low-use applications. The only difference between these probes is the outer shell; the high-use application probe has a shell made of G-10 fiberglass for a higher price, and the low-use application probe has a shell made of AISI 310 steel for a lower price. Both types of probes can be assembled in less than 8 hours for less than $2,500, requiring only soldering expertise. The low cost and short time to create these probes makes wide profit margins possible. The market for these cryogenic dipping probes is currently untapped, as most research groups and companies that use these probes build their own, which allows for rapid business growth. These potential consumers can be easily reached by marketing these probes at superconducting conferences. After several years of selling >50 probes, mass production can easily become possible by hiring several technicians, and still maintaining wide profit margins.
ContributorsHudson, Brooke Ashley (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The goal of the paper was to examine the fatigue mechanisms of polymers and silicone based elastomers. The mechanisms of fatigue due to crazing: the alignment of polymer chains to the stress axis, and shear banding: the localized orientation of the polymer by the shear stresses from two planes, were discussed in depth in this paper. Crazing only occurs in tensile stress, is initiated on the surface of the material, and only occurs in brittle polymers. Crazing also accounts for a 40-60% decrease in density, causing localized weakening of the material and a concentration in stress. This is due to a decrease in effective cross sectional area. The mechanism behind discontinuous growth bands was also discussed to be the cause of cyclic crazing. Shear banding only occurs in ductile polymers and can result in the failure of polymers via necking. Furthermore, the high fatigue resistance of silicone elastomers was discussed in this paper. This conclusion was made because of the lack of fatigue mechanisms (crazing, discontinuous growth bands, and shears banding) in the observed elastomer's microstructure after the samples had undergone fatigue tests. This was done through an analysis of room temperature vulcanized silicone adhesives, a heat-curing silicone elastomer, and a self-curing transparent silicone rubber. Fatigue of room temperature vulcanized silicon was observed, however this was reasoned to be the failure of the adhesion of the elastomer to the steel substrate instead of the microstructure itself. Additionally, the significance of fatigue in real world applications was discussed using SouthWest Airlines Flight 812 as an example.
ContributorsWong, Christopher Stanley (Author) / Adams, James (Thesis director) / Krause, Stephen (Committee member) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Food’s implication on culture and agriculture challenges agriculture’s identity in the age of the city. As architect and author Carolyn Steel explained, “we live in a world shaped by food, and if we realize that, we can use food as a powerful tool — a conceptual tool, design tool, to shape the world differently. It triggers a new way of thinking about the problem, recognizing that food is not a commodity; it is life, it is culture, it’s us. It’s how we evolved.” If the passage of food culture is dependent upon the capacity for learning and transmitting knowledge to succeeding generations, the learning environments should reflect this tenability in its systematic and architectural approach.
Through an investigation of agriculture and cuisine and its consequential influence on culture, education, and design, the following project intends to reconceptualize the learning environment in order facilitate place-based practices. Challenging our cognitive dissonant relationship with food, the design proposal establishes a food identity through an imposition of urban agriculture and culinary design onto the school environment. Working in conjunction with the New American University’s mission, the design serves as a didactic medium between food, education, and architecture in designing the way we eat.
Through an investigation of agriculture and cuisine and its consequential influence on culture, education, and design, the following project intends to reconceptualize the learning environment in order facilitate place-based practices. Challenging our cognitive dissonant relationship with food, the design proposal establishes a food identity through an imposition of urban agriculture and culinary design onto the school environment. Working in conjunction with the New American University’s mission, the design serves as a didactic medium between food, education, and architecture in designing the way we eat.
ContributorsBone, Nicole (Author) / Rocchi, Elena (Thesis director) / Hejduk, Renata (Committee member) / Robert, Moric (Committee member) / The Design School (Contributor) / School of Geographical Sciences and Urban Planning (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
A look at how the Vietnam War influenced immigrant and first-generation children's perception of culture. This thesis focuses on Vietnamese-American immigration as a whole, and on subjects on the American west coast. Interviews were conducted with eleven subjects to examine the most profound influences on culture and how native culture is passed on through the generations. Focuses include cultural identity, cultural inheritance, prominent native and adoptive cultural values, and culture as affected by adversity.
ContributorsTran, Yvana (Author) / Loebenberg, Abby (Thesis director) / Suk, Mina (Committee member) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Protest has been both a practice of citizenship rights as well as a means of social pressure for change in the context of Mexico City's water system. This paper explores the role that citizen protest plays in the city's response to its water challenges. We use media reports of water protests to examine where protests happen and the causes associated with them. We analyze this information to illuminate socio-political issues associated with the city's water problems, such as political corruption, gentrification, as well as general power dynamics and lack of transparency between citizens, governments, and the private businesses which interact with them. We use text analysis of newspaper reports to analyze protest events in terms of the primary stimuli of water conflict, the areas within the city more prone to conflict, and the ways in which conflict and protest are used to initiate improved water management and to influence decision making to address water inequities. We found that water scarcity is the primary source of conflict, and that water scarcity is tied to new housing and commercial construction. These new constructions often disrupt water supplies and displace of minority or marginalized groups, which we denote as gentrification. The project demonstrates the intimate ties between inequities in housing and water in urban development. Key words: Conflict, protest, Mexico City, scarcity, new construction
ContributorsFlores, Shalae Alena (Author) / Eakin, Hallie C. (Thesis director) / Baeza-Castro, Andres (Committee member) / Lara-Valencia, Francisco (Committee member) / School of Geographical Sciences and Urban Planning (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The purpose of this honors project is to analyze the difference between different powder separation techniques, and their suitability for my capstone project – ‘Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity’. Due to the nature of my capstone project, my group needs to characterize foreign contaminants in IN 718 (Ni-based superalloy) powder with a mean diameter around 40um. In order to clearly analyze the contaminants and recycle useful IN 718 powders, powder separation is favorable since the filtered samples will be much easier to characterize rather than inspect all the powders at once under microscope. By conducting literature review, I found that powder separation is commonly used in Geology, and Chemistry department. To screen which combination of techniques could be the best for my project, I have consulted several research specialists, obtained adequate knowledge about powder separation. Accordingly, I will summarize the pros and cons of each method with regard the specific project that I am working on, and further explore the impacts of each method under economical, societal, and environmental considerations. Several powder separation techniques will be discussed in details in the following sections, including water elutriation, settling column, magnetic separation and centrifugation. In addition to these methods, sieving, water tabling and panning will be briefly introduced. After detailed comparison, I found that water elutriation is the most efficient way to purity IN718 powder for reuse purpose, and recovery rate is as high as 70%, which could result in a significant reduction in the manufacturing cost for Honeywell since currently Honeywell only use virgin powders to build parts, and 90% of the leftover powders are discarded.
ContributorsLuo, Zheyu (Author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Honeywell is currently extending the reach of additive manufacturing (AM) in its product line and expects to produce as much as 40% of its inventory through AM in five years. Additive manufacturing itself is expected to grow into a $3.1 billion dollar industry in the next 5 to 10 years. Reusing IN 718 powder, a nickel-based super alloy metal powder, is an ideal option to reduce costs as well as reduce waste because it can be used with additive manufacturing, but the main obstacles are lack of procedure standardization and product quality assurances from this process. The goal of the capstone project, "Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity," is to create a powder characterization protocol in order to determine if the IN 718 powder can be reused and what effect the IN 718 reused powder has on the mechanical properties of the products Honeywell fabricates. To provide context and impact of this capstone project, this paper serves to identify the benefits of AM for Honeywell and the cost effectiveness of reusing the powder versus using virgin powder every time. It was found that Honeywell's investment in AM is due to the cost effectiveness of AM, versatility in product design, and to ensure Honeywell remains competitive in the future. In terms of reducing expenses, reusing powder enables costs to be approximately 45% less than using virgin powder. With these key pieces of information, the motivations for this capstone project are understood to a fuller and more profound degree.
ContributorsQuigley, Elizabeth (Co-author) / Luo, Zheyu (Co-author) / Murella, Anoosha (Co-author) / Lee, Wey Lyn (Co-author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The objective for Under the Camper Shell was to build a prototype of a full living environment within the confines of a pickup truck bed and camper shell. The total volume available to work with is approximately 85ft3. This full living environment entails functioning systems for essential modern living, providing shelter and spaces for cooking, sleeping, eating, and sanitation. The project proved to be very challenging from the start. First, the livable space is extremely small, being only tall enough for one to sit up straight. The truck and camper shell were both borrowed items, so no modifications were allowed for either, e.g. drilling holes for mounting. The idea was to create a system that could be easily removed, transforming it from a camper to a utility truck. The systems developed for the living environment would be modular and transformative so to accommodate for different necessities when packing. The goal was to create a low-water system with sustainability in mind. Insulating the space was the largest challenge and the most rewarding, using body heat to warm the space and insulate from the elements. Comfort systems were made of high density foam cushions in sections to allow folding and stacking for different functions (sleeping, lounging, and sitting). Sanitation is necessary for healthy living and regular human function. A composting toilet was used for the design, lending to low-water usage and is sustainable over time. Saw dust would be necessary for its function, but upon composting, the unit will generate sufficient amounts of heat to act as a space heater. Showering serves the functions of exfoliation and ridding of bacteria, both of which bath wipes can accomplish, limiting massive volumes of water storage and waste. Storage systems were also designed for modularity. Hooks were installed the length of the bed for hanging or securing items as necessary. Some are available for hanging bags. A cabinetry rail also runs the length of the bed to allow movement of hard storage to accommodate different scenarios. The cooking method is called "sous-vide", a method of cooking food in air-tight bags submerged in hot water. The water is reusable for cooking and no dishes are necessary for serving. Overall, the prototype fulfilled its function as a full living environment with few improvements necessary for future use.
ContributorsLimsirichai, Pimwadee (Author) / Foy, Joseph (Thesis director) / Parrish, Kristen (Committee member) / Barrett, The Honors College (Contributor) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor)
Created2014-12
Description
Since the start of U.S. hostilities against Iraq in 2003, International Relations scholars have begun to characterize the U.S. as potentially an empire. This is because the traditional notion of sovereignty under the Westphalian nation-state system is held as a constant in the prominent theories that govern how it is thought how nation-states interact with each other. The blatant violation of international laws and norms with impunity by the U.S. have led to a re-questioning of the true dynamics underlying this system. Some scholars have characterized the recent research as a popular fad, but most of the research is aimed at just attempting to show how the U.S. could be an empire. What the current research is missing is how the U.S. became an empire, with that analysis anchored in an historical comparison. A complete chronological review of each system in its entirety is required, with all of its components, to more fully understand these phenomena. This has required researchers to devise a new methodological process of qualitatively and quantitatively analyzing macro structures. We believe the implications of the insights that can be obtained with this new method could be of use to many fields and can generate many new hypotheses to test in the future.
ContributorsRoche, Joshua Nathan (Author) / Crittenden, Jack (Thesis director) / Walker, Stephen (Committee member) / Barrett, The Honors College (Contributor) / Economics Program in CLAS (Contributor) / School of Geographical Sciences and Urban Planning (Contributor) / School of Politics and Global Studies (Contributor)
Created2014-12