Barrett, The Honors College Thesis/Creative Project Collection
Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.
Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.
Displaying 1 - 10 of 197
Filtering by
- Creators: Materials Science and Engineering Program
- Creators: Ringenbach, Shannon
- Creators: Loebenberg, Abby
Description
The vastly growing field of supercomputing is in dire need of a new measurement system to optimize JMRAM (Josephson junction magnetoresistive random access memory) devices. To effectively measure these devices, an ultra-low-noise, low cost cryogenic dipping probe with a dynamic voltage range is required. This dipping probe has been designed by ASU with <100 nVp-p noise, <10 nV offsets, 10 pV to 16 mV voltage range, and negligible thermoelectric drift. There is currently no other research group or company that can currently match both these low noise levels and wide voltage range. Two different dipping probes can be created with these specifications: one for high-use applications and one for low-use applications. The only difference between these probes is the outer shell; the high-use application probe has a shell made of G-10 fiberglass for a higher price, and the low-use application probe has a shell made of AISI 310 steel for a lower price. Both types of probes can be assembled in less than 8 hours for less than $2,500, requiring only soldering expertise. The low cost and short time to create these probes makes wide profit margins possible. The market for these cryogenic dipping probes is currently untapped, as most research groups and companies that use these probes build their own, which allows for rapid business growth. These potential consumers can be easily reached by marketing these probes at superconducting conferences. After several years of selling >50 probes, mass production can easily become possible by hiring several technicians, and still maintaining wide profit margins.
ContributorsHudson, Brooke Ashley (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The goal of the paper was to examine the fatigue mechanisms of polymers and silicone based elastomers. The mechanisms of fatigue due to crazing: the alignment of polymer chains to the stress axis, and shear banding: the localized orientation of the polymer by the shear stresses from two planes, were discussed in depth in this paper. Crazing only occurs in tensile stress, is initiated on the surface of the material, and only occurs in brittle polymers. Crazing also accounts for a 40-60% decrease in density, causing localized weakening of the material and a concentration in stress. This is due to a decrease in effective cross sectional area. The mechanism behind discontinuous growth bands was also discussed to be the cause of cyclic crazing. Shear banding only occurs in ductile polymers and can result in the failure of polymers via necking. Furthermore, the high fatigue resistance of silicone elastomers was discussed in this paper. This conclusion was made because of the lack of fatigue mechanisms (crazing, discontinuous growth bands, and shears banding) in the observed elastomer's microstructure after the samples had undergone fatigue tests. This was done through an analysis of room temperature vulcanized silicone adhesives, a heat-curing silicone elastomer, and a self-curing transparent silicone rubber. Fatigue of room temperature vulcanized silicon was observed, however this was reasoned to be the failure of the adhesion of the elastomer to the steel substrate instead of the microstructure itself. Additionally, the significance of fatigue in real world applications was discussed using SouthWest Airlines Flight 812 as an example.
ContributorsWong, Christopher Stanley (Author) / Adams, James (Thesis director) / Krause, Stephen (Committee member) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
A look at how the Vietnam War influenced immigrant and first-generation children's perception of culture. This thesis focuses on Vietnamese-American immigration as a whole, and on subjects on the American west coast. Interviews were conducted with eleven subjects to examine the most profound influences on culture and how native culture is passed on through the generations. Focuses include cultural identity, cultural inheritance, prominent native and adoptive cultural values, and culture as affected by adversity.
ContributorsTran, Yvana (Author) / Loebenberg, Abby (Thesis director) / Suk, Mina (Committee member) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The purpose of this honors project is to analyze the difference between different powder separation techniques, and their suitability for my capstone project – ‘Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity’. Due to the nature of my capstone project, my group needs to characterize foreign contaminants in IN 718 (Ni-based superalloy) powder with a mean diameter around 40um. In order to clearly analyze the contaminants and recycle useful IN 718 powders, powder separation is favorable since the filtered samples will be much easier to characterize rather than inspect all the powders at once under microscope. By conducting literature review, I found that powder separation is commonly used in Geology, and Chemistry department. To screen which combination of techniques could be the best for my project, I have consulted several research specialists, obtained adequate knowledge about powder separation. Accordingly, I will summarize the pros and cons of each method with regard the specific project that I am working on, and further explore the impacts of each method under economical, societal, and environmental considerations. Several powder separation techniques will be discussed in details in the following sections, including water elutriation, settling column, magnetic separation and centrifugation. In addition to these methods, sieving, water tabling and panning will be briefly introduced. After detailed comparison, I found that water elutriation is the most efficient way to purity IN718 powder for reuse purpose, and recovery rate is as high as 70%, which could result in a significant reduction in the manufacturing cost for Honeywell since currently Honeywell only use virgin powders to build parts, and 90% of the leftover powders are discarded.
ContributorsLuo, Zheyu (Author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Honeywell is currently extending the reach of additive manufacturing (AM) in its product line and expects to produce as much as 40% of its inventory through AM in five years. Additive manufacturing itself is expected to grow into a $3.1 billion dollar industry in the next 5 to 10 years. Reusing IN 718 powder, a nickel-based super alloy metal powder, is an ideal option to reduce costs as well as reduce waste because it can be used with additive manufacturing, but the main obstacles are lack of procedure standardization and product quality assurances from this process. The goal of the capstone project, "Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity," is to create a powder characterization protocol in order to determine if the IN 718 powder can be reused and what effect the IN 718 reused powder has on the mechanical properties of the products Honeywell fabricates. To provide context and impact of this capstone project, this paper serves to identify the benefits of AM for Honeywell and the cost effectiveness of reusing the powder versus using virgin powder every time. It was found that Honeywell's investment in AM is due to the cost effectiveness of AM, versatility in product design, and to ensure Honeywell remains competitive in the future. In terms of reducing expenses, reusing powder enables costs to be approximately 45% less than using virgin powder. With these key pieces of information, the motivations for this capstone project are understood to a fuller and more profound degree.
ContributorsQuigley, Elizabeth (Co-author) / Luo, Zheyu (Co-author) / Murella, Anoosha (Co-author) / Lee, Wey Lyn (Co-author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Previous research has found improvements in motor and cognitive measures following Assisted Cycle Therapy (AC) in adolescence with Down syndrome (DS). Our study investigated whether we would find improvements in mental health in older adults with DS as measured from the Adapted Behavior Dementia Questionnaire (ABDQ), Physical Activity Self Efficacy Scales (PACES), Children's Depressive inventory, which are early indicators of Alzheimer's disease (AD) in persons with Down syndrome. This study consisted of seven participants with Down syndrome between the ages of 31 and 54, inclusive, that cycled for 30 minutes 3 x/week for eight weeks either at their voluntary cycling rate (VC) or approximately 35% faster with the help of a mechanical motor (ACT). Our results were consistent with our prediction that self efficacy improved following ACT, but not VC. However, our results were not consistent with our prediction that dementia and depression were improved following ACT more than VC. These results were interpreted with respect to the effects of exercise in older adults with DS. Future research should focus on recruiting more participants, especially those with deficits in mental health.
ContributorsPandya, Sachin (Author) / Ringenbach, Shannon (Thesis director) / Coon, David (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The objective for Under the Camper Shell was to build a prototype of a full living environment within the confines of a pickup truck bed and camper shell. The total volume available to work with is approximately 85ft3. This full living environment entails functioning systems for essential modern living, providing shelter and spaces for cooking, sleeping, eating, and sanitation. The project proved to be very challenging from the start. First, the livable space is extremely small, being only tall enough for one to sit up straight. The truck and camper shell were both borrowed items, so no modifications were allowed for either, e.g. drilling holes for mounting. The idea was to create a system that could be easily removed, transforming it from a camper to a utility truck. The systems developed for the living environment would be modular and transformative so to accommodate for different necessities when packing. The goal was to create a low-water system with sustainability in mind. Insulating the space was the largest challenge and the most rewarding, using body heat to warm the space and insulate from the elements. Comfort systems were made of high density foam cushions in sections to allow folding and stacking for different functions (sleeping, lounging, and sitting). Sanitation is necessary for healthy living and regular human function. A composting toilet was used for the design, lending to low-water usage and is sustainable over time. Saw dust would be necessary for its function, but upon composting, the unit will generate sufficient amounts of heat to act as a space heater. Showering serves the functions of exfoliation and ridding of bacteria, both of which bath wipes can accomplish, limiting massive volumes of water storage and waste. Storage systems were also designed for modularity. Hooks were installed the length of the bed for hanging or securing items as necessary. Some are available for hanging bags. A cabinetry rail also runs the length of the bed to allow movement of hard storage to accommodate different scenarios. The cooking method is called "sous-vide", a method of cooking food in air-tight bags submerged in hot water. The water is reusable for cooking and no dishes are necessary for serving. Overall, the prototype fulfilled its function as a full living environment with few improvements necessary for future use.
ContributorsLimsirichai, Pimwadee (Author) / Foy, Joseph (Thesis director) / Parrish, Kristen (Committee member) / Barrett, The Honors College (Contributor) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor)
Created2014-12
Description
This study examines the effect of exercise therapy on a stationary bike on cognitive function, specifically inhibition and set-switching, in adolescents with Down syndrome. 44 participants were randomly divided between the voluntary cycling therapy group (VCT) (i.e., self-selected cadence), assisted cycling therapy group (ACT) (i.e., 30% faster than self-selected cadence accomplished by a motor), and a control group (NC) in which the participants did not undergo any exercise therapy. Both cycling groups rode a stationary bicycle, for 30 minutes, three times a week, for eight-weeks. At the beginning (i.e., pretest) and end (i.e., posttest) of the eight-week session the participants completed tasks to evaluate their cognitive function. They completed three trials of the card sort test (i.e., set-switching) and three trials of the knock-tap test (i.e, inhibition) before and after eight-weeks of cycling therapy. The scores of these tests were analyzed using one-way ANOVA between groups and paired samples t-tests. The results showed that after eight-weeks of cycling therapy the participants in the VCT group performed worse in the knock-tap test, but improved in two trials of the card sort test. The results also showed that the participants in the ACT group performed worse after eight-weeks of exercise therapy in one trial of the card sort test. No significant changes were seen for the control group. Due to the fact that on average the participants in the VCT group cycled with a higher heart rate, our results suggest exercise that significantly elevates heart rate can improve cognitive function, specifically set-switching, in adolescents with Down syndrome.
ContributorsBenson, Alicia Meigh (Author) / Ringenbach, Shannon (Thesis director) / Amazeen, Eric (Committee member) / Maraj, Brian (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor)
Created2015-05
Description
This study examines cognitive planning in adolescents with Down syndrome (DS) following an 8-week assisted cycling therapy intervention. Forty-three participants were randomly assigned to assisted cycling (AC) (i.e., at least 30% faster than self-selected cadence accomplished by a motor), voluntary cycling (VC) (self-selected cadence), and no cycling (NC) control group. Both AC and VC rode a stationary bicycle three times/week, 30 minutes/session, for eight weeks in duration. Participants completed cognitive testing that assessed cognitive planning at the beginning (i.e., pretest) and end (i.e., posttest) of the 8-week intervention. Consistent with our hypothesis, the results showed that cognitive planning improved following eight weeks of cycling for the AC group. The same results were not seen for individuals in the VC or NC groups. Our results suggest that assisted cycling therapy may induce permanent changes in the prefrontal cortex in adolescents with DS.
ContributorsMillar, Kelsey Leann (Author) / Ringenbach, Shannon (Thesis director) / Amazeen, Eric (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
This study examines the effectiveness of two modes of exercise on depression in adolescents with Down syndrome (DS). Thirty nine participants were randomly divided into a voluntary cycling group (VC) (i.e., self-selected cadence), an assisted cycling group (AC) (i.e., at least 30% faster than self-selected cadence accomplished by a motor), or a no exercise group (NC). In each cycling intervention the participant completed 30 minute cycling sessions, three times per week for a total of eight weeks. The Children's Depression Inventory II was administered prior to cycling (i.e., pretest) and after the eight week intervention (i.e., posttest). Although the data did not reach conventional levels of statistical significance, the results of the study demonstrated partial support for our hypothesis that adolescents with DS showed improvements in depression as measured by the Children's Depression Inventory II following assisted cycling, but not following eight weeks of voluntary cycling. In other words, eight weeks of moderate AC exercise demonstrated a trend for improved depression in adolescents with DS.
ContributorsMcgownd, Shana Leah (Author) / Ringenbach, Shannon (Thesis director) / Youngstedt, Shawn (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05