Barrett, The Honors College Thesis/Creative Project Collection
Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.
Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.
Displaying 1 - 9 of 9
Filtering by
- Creators: Electrical Engineering Program
Description
Recently, electric and magnetic field sensing has come of interest to the military for a variety of applications, including imaging circuitry and detecting explosive devices. This thesis describes research at the ASU's Flexible Electronics and Display Center (FEDC) towards the development of a flexible electric and magnetic field imaging blanket. D-dot sensors, which detect changes in electric flux, were chosen for electric field sensing, and a single D-dot sensor in combination with a lock-in amplifier was used to detect individuals passing through an oscillating electric field. This was then developed into a 1 x 16 array of D-dot sensors used to image the field generated by two parallel wires. After the fabrication of a two-dimensional array, it was discovered that commercial field effect transistors did not have a high enough off-resistance to isolate the sensor form the column line. Three alternative solutions were proposed. The first was a one-dimensional array combined with a mechanical stepper to move the array across the E-field pattern. The second was a 1 x 16 strip detector combined with the techniques of computed tomography to reconstruct the image of the field. Such techniques include filtered back projection and algebraic iterative reconstruction (AIR). Lastly, an array of D-dot sensors was fabricated on a flexible substrate, enabled by the high off-resistance of the thin film transistors produced by the FEDC. The research on magnetic field imaging began with a feasibility study of three different types of magnetic field sensors: planar spiral inductors, Hall effect sensors, and giant magnetoresistance (GMR). An experimental array of these sensors was designed and fabricated, and the sensors were used to image the fringe fields of a Helmholtz coil. Furthermore, combining the inductors with the other two types of sensors resulted in three-dimensional sensors. From these measurements, it was determined that planar spiral inductors and Hall effect sensors are best suited for future imaging arrays.
ContributorsLarsen, Brett William (Author) / Allee, David (Thesis director) / Papandreou-Suppappola, Antonia (Committee member) / Barrett, The Honors College (Contributor) / Department of Physics (Contributor) / Electrical Engineering Program (Contributor)
Created2015-05
DescriptionThis is a project to create an electric field sensing system which is fully portable. This system should provide accurate electric field readings from transmission lines allowing abstraction to find the voltage on the transmission line.
ContributorsScowen, Kegan (Co-author) / Vora, Sandeep (Co-author) / Ye, Weidong (Co-author) / Sciacca, Jacob (Co-author) / Allee, David (Thesis director) / Karady, George (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Electrical Engineering Program (Contributor)
Created2014-12
Description
This project examines the science of electric field sensing and completes experiments, gathering data to support its utility for various applications. The basic system consists of a transmitter, receiver, and lock-in amplifier. The primary goal of the study was to determine if such a system could detect a human disturbance, due to the capacitance of a human body, and such a thesis was supported. Much different results were obtained when a person disturbed the electric field transmitted by the system than when other types of objects, such as chairs and electronic devices, were placed in the field. In fact, there was a distinct difference between persons of varied sizes as well. This thesis goes through the basic design of the system and the process of experimental design for determining the capabilities of such an electric field sensing system.
ContributorsBranham, Breana Michelle (Author) / Allee, David (Thesis director) / Papandreou-Suppappola, Antonia (Committee member) / Phillips, Stephen (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor) / School of International Letters and Cultures (Contributor)
Created2013-05
Description
Machine learning is a powerful tool for processing and understanding the vast amounts of data produced by sensors every day. Machine learning has found use in a wide variety of fields, from making medical predictions through correlations invisible to the human eye to classifying images in computer vision applications. A wide range of machine learning algorithms have been developed to attempt to solve these problems, each with different metrics in accuracy, throughput, and energy efficiency. However, even after they are trained, these algorithms require substantial computations to make a prediction. General-purpose CPUs are not well-optimized to this task, so other hardware solutions have developed over time, including the use of a GPU, FPGA, or ASIC.
This project considers the FPGA implementations of MLP and CNN feedforward. While FPGAs provide significant performance improvements, they come at a substantial financial cost. We explore the options of implementing these algorithms on a smaller budget. We successfully implement a multilayer perceptron that identifies handwritten digits from the MNIST dataset on a student-level DE10-Lite FPGA with a test accuracy of 91.99%. We also apply our trained network to external image data loaded through a webcam and a Raspberry Pi, but we observe lower test accuracy in these images. Later, we consider the requirements necessary to implement a more elaborate convolutional neural network on the same FPGA. The study deems the CNN implementation feasible in the criteria of memory requirements and basic architecture. We suggest the CNN implementation on the same FPGA to be worthy of further exploration.
This project considers the FPGA implementations of MLP and CNN feedforward. While FPGAs provide significant performance improvements, they come at a substantial financial cost. We explore the options of implementing these algorithms on a smaller budget. We successfully implement a multilayer perceptron that identifies handwritten digits from the MNIST dataset on a student-level DE10-Lite FPGA with a test accuracy of 91.99%. We also apply our trained network to external image data loaded through a webcam and a Raspberry Pi, but we observe lower test accuracy in these images. Later, we consider the requirements necessary to implement a more elaborate convolutional neural network on the same FPGA. The study deems the CNN implementation feasible in the criteria of memory requirements and basic architecture. We suggest the CNN implementation on the same FPGA to be worthy of further exploration.
ContributorsLythgoe, Zachary James (Author) / Allee, David (Thesis director) / Hartin, Olin (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-12
Description
The field of computed tomography involves reconstructing an image from lower dimensional projections. This is particularly useful for visualizing the inner structure of an object. Presented here is an imaging setup meant for use in computed tomography applications. This imaging setup relies on imaging electric fields through active interrogation. Models designed in Ansys Maxwell are used to simulate this setup and produce 2D images of an object from 1D projections to verify electric field imaging as a potential route for future computed tomography applications. The results of this thesis show reconstructed images that resemble the object being imaged using a filtered back projection method of reconstruction. This work concludes that electric field imaging is a promising option for computed tomography applications.
ContributorsDrummond, Zachary Daniel (Author) / Allee, David (Thesis director) / Cochran, Douglas (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Imaging using electric fields could provide a cheaper, safer, and easier alternative to the standard methods used for imaging. The viability of electric field imaging at very low frequencies using D-dot sensors has already been investigated and proven. The new goal is to determine if imaging is viable at high frequencies. In order to accomplish this, the operational amplifiers used in the very low frequency imaging test set up must be replaced with ones that have higher bandwidth. The trade-off of using these amplifiers is that they have a typical higher input leakage current on the order of 100 compared to the standard. Using a modified circuit design technique that reduces input leakage current of the operational amplifiers used in the imaging test setup, a printed circuit board with D-dot sensors is fabricated to identify the frequency limitations of electric field imaging. Data is collected at both low and high frequencies as well as low peak voltage. The data is then analyzed to determine the range in intensity of electric field and frequency that this circuit low-leakage design can accurately detect a signal. Data is also collected using another printed circuit board that uses the standard circuit design technique. The data taken from the different boards is compared to identify if the modified circuit design technique allows for higher sensitivity imaging. In conclusion, this research supports that using low-leakage design techniques can allow for signal detection comparable to that of the standard circuit design. The low-leakage design allowed for sensitivity within a factor two to that of the standard design. Although testing at higher frequencies was limited, signal detection for the low-leakage design was reliable up until 97 kHz, but further experimentation is needed to determine the upper frequency limits.
ContributorsLin, Richard (Co-author) / Angell, Tyler (Co-author) / Allee, David (Thesis director) / Chung, Hugh (Committee member) / Electrical Engineering Program (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Precise Position, Navigation, and Timing (PNT) is necessary for the functioning of many critical infrastructure sectors relied upon by millions every day. Specifically, precise timing is primarily provided through the Global Positioning System (GPS) and its system of satellites that each house multiple atomic clocks. Without precise timing, utilities such as the internet, the power grid, navigational systems, and financial systems would cease operation. Because oscillator devices experience frequency drift during operation, many systems rely on the precise time provided by GPS to maintain synchronization across the globe. However, GPS signals are particularly susceptible to disruption – both intentional and unintentional – due to their space-based, low-power, and unencrypted nature. It is for these reasons that there is a need to develop a system that can provide an accurate timing reference – one disciplined by a GPS signal – and can also maintain its nominal frequency in scenarios of intermittent GPS availability.
This project considers an accurate timing reference deployed via Field Programmable Gate Array (FPGA) and disciplined by a GPS module. The objective is to implement a timing reference on a DE10-Lite FPGA disciplined by the 1 Pulse-Per-Second (PPS) output of an MTK3333 GPS module. When a signal lock is achieved with GPS, the MTK3333 delivers a pulse input to the FPGA on the leading edge of every second. The FPGA aligns a digital oscillator to this PPS reference, providing a disciplined output signal at a 10 MHz frequency that is maintained in events of intermittent GPS availability. The developed solution is evaluated using a frequency counter disciplined by an atomic clock in addition to an oscilloscope. The findings deem the software solution acceptable with more work needed to debug the hardware solution
ContributorsWitthus, Alexander (Author) / Allee, David (Thesis director) / Hartin, Olin (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2022-05
Description
Machine learning has been increasingly integrated into several new areas, namely those related to vision processing and language learning models. These implementations of these processes in new products have demanded increasingly more expensive memory usage and computational requirements. Microcontrollers can lower this increasing cost. However, implementation of such a system on a microcontroller is difficult and has to be culled appropriately in order to find the right balance between optimization of the system and allocation of resources present in the system. A proof of concept that these algorithms can be implemented on such as system will be attempted in order to find points of contention of the construction of such a system on such limited hardware, as well as the steps taken to enable the usage of machine learning onto a limited system such as the general purpose MSP430 from Texas Instruments.
ContributorsMalcolm, Ian (Author) / Allee, David (Thesis director) / Spanias, Andreas (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2024-05
Description
This project details a magnetic field detection system that can be mounted on an unmanned aerial vehicle (UAV). The system is comprised of analog circuitry to detect and process the magnetic signals, digital circuitry to sample and store the data outputted from the analog front end, and finally a UAV to carry and mobilize the electronic parts. The system should be able to sense magnetic fields from power transmission lines, enabling the determination of whether or not current is running through the power line.
ContributorsTheoharatos, Dimitrios (Co-author) / Brazones, Ryan (Co-author) / Pagaduan, Patrick (Co-author) / Allee, David (Thesis director) / Karady, George (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2015-05